OFFLINE installer for the latest updates - Last Update June 6th 2024

[moxiejeff]

Correct.

A way to test if the Live Installer is working is to run it a couple of times -- are you getting the same files downloaded over and over? If so, it seems your node may not be refreshed. If you're trying the Live Installer and you see new files each time, then I think it's working.

If your Live Installer is not working, then your next step is to use the offline installer, let it do its thing and you don't need to run anything again (until the next time they push more updates out, repeat...)

[virtuali]

More precisely, if you run the FSDT Live Update twice in a row, and the 2nd time it doesn't download anything you can be sure your local node is fine, and you are fully updated.

[alexberry]

After the initial Live Update run, mine, and I think other's too, downloads rules_fueltruck.cfg every time, but that's it as far as I can tell.

[abhigyan]

respected developer and simmers out there
it was every thing working normal before the last update. now the pmdg boing product i am unable to use this. but incase of finix everything is all right.request u to help me out. if there is any error in the log file request for how to resolve always asking for to stop the engine to stop to use gsx not in case of phinix
thanks
help is much app

[virtuali]

it was every thing working normal before the last update. now the pmdg boing product i am unable to use this. but incase of finix everything is all right.request u to help me out. if there is any error in the log file request for how to resolve always asking for to stop the engine to stop to use gsx not in case of phinix

Be sure the default internal airplane configuration is active. Open the airplane config panel, select RESET and check it says "internal gsx database".

[abhigyan]

respected dev
thanks for the reply
sorry to ask from where i should access the airplane config panel . from the msfs  bar gsx menu or what. i may be dumb to ask this q, for that i am really sorry,
still need help thanks

[virtuali]

Then I strongly suggest reading the manual first.

There's a button to open the Aircraft configuration in the GSX normal menu, could be your panel is too small you don't see it ? You can resize it.

[tbaac]

Hi.  GSX Pro still won't run for me even after running the offline installer.
(this is in MSFS, I don't have P3D installed)

Running GSX as an admin, I get this Coulatl.err:

couatl v4.8 (build 4834)
panic log started on Wed Aug 31 08:32:48 2022

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\GSX\__init__.py", line 524, in <lambda>
  File ".\common\youcontrol.py", line 243, in showMenusWithSameTag
  File ".\common\youcontrol.py", line 84, in showContainer
  File ".\GSX\__init__.py", line 971, in checkOnGroundState
  File ".\GSX\assistanceServices\__init__.py", line 4042, in aircraftEngaged
  File ".\GSX\assistanceServices\__init__.py", line 4136, in materializeTrafficCones
  File ".\GSX\assistanceServices\__init__.py", line 4105, in materializeFuelManHole
  File ".\common\modelCustomization.py", line 1179, in getModelWithTitle
common.modelCustomization.ModelNotAvailable: No model of title FSDT_Fuel_Hydrant_Chevron
{'Airport': 'EGLL', 'User Pos': (51.468363667776, -0.45445855713248967, 26.2069 m, 2.47056 m, 0.10927778033563965, 0.017046362161636353, 0.024434609338641167, 0.005793410202100793, 2.553919111633301, 1.0)}

Running as the regular user, the .err file ends in this:

Using aircraft data from aircraftDb.py
Specific .cfg file for G-FLAA not found in I:\Microsoft Flight Simulator\Packages\Community\pmdg-aircraft-738\SimObjects\Airplanes\PMDG 737-800, using standard GSX.CFG file
Specific .cfg file for G-FLAA not found in C:\Users\tony\AppData\Roaming\Virtuali/Airplanes\PMDG 737-800, using standard GSX.CFG file
Section [contact_points] contains invalid data at entry point.6
GSX SimStart
User collision geometries reloaded
Loading airport EGLL from \\?\I:\Microsoft Flight Simulator\Packages\Community\inibuilds-airport-egll-london\scenery\inibuilds\EGLL.bgl
Loading user customizations from C:\Users\tony\AppData\Roaming\Virtuali/GSX/MSFS\egll-njda4n.ini
Creating model cache...
No stock rules folder found for textures
No stock rules folder found for models
Model cache created
SharedMemInterface created
Searching for jetways...
510 StaticObject found
Jetway ASO_Jetway at parking Gate 547
Jetway ASO_Jetway at parking Gate 419
onEnteredAirport EGLL
emulateMenu_MSFS
Traceback (most recent call last):
  File ".\common\criticalsection.py", line 23, in _synchronized
  File ".\common\mpmenu.py", line 123, in emulateMenu_MSFS
IOError: [Errno 2] No such file or directory: u'I:\\Microsoft Flight Simulator\\Packages/MSFS/fsdreamteam-gsx-pro/html_ui/InGamePanels/FSDT_GSX_Panel/menu'
{'Airport': 'EGLL', 'User Pos': (51.468363667776, -0.45445855713248967, 26.2069 m, 2.47056 m, 0.10927778033563965, 0.017046362161636353, 0.024434609338641167, 0.005793410202100793, 2.553919111633301, 1.0)}

Being clear, I'd much rather not run this as admin, it just seemed like it might be needed.
The path at the end of the 2nd log looks odd obviously.
The path should be I:\Microsoft Flight Simulator\Packages\Community\fsdreamteam-gsx-pro\html_ui\InGamePanels\FSDT_GSX_Panel\menu

I can't find an ini file for this, where should the ini file go and does that look like the problem?

Thanks

[virtuali]

Hi.  GSX Pro still won't run for me even after running the offline installer

Your error log shows you are missing the whole installation, as if both packages were missing or unlinked to the Community. See here how to do a complete reinstall:

https://www.fsdreamteam.com/forum/index.php/topic,26933.0.html

[abhigyan]

respected dev
tried all short of ur advice, but in case of fenix itworks but in case of pmdg the menu opens onece then it told to stop the eng to use gsx.in the pict which option should choose
thanks

[Darewell]

Just saw the last changelog, thanks Umberto!

Is there a way to select the tow truck with a towbar for all the flights?

Great update for SB integration too!

And thanks for the 738 variants! You have done a lot!

Edit: I'm curious, which method are you using now for the pushback?

[pinolo1978]

with the latest update, the fuel truck with 738 arrives, positions itself but even selecting the quantity to be loaded via gsx nothing happens, it stands still, I state that all the weights on the plane are zero

[Darewell]

I just pushed at CDG but it's very "shaky"

[virtuali]

even selecting the quantity to be loaded via gsx nothing happens

The way the airplane is setup by default, you are not supposed to even see the GSX menu with the quantity! That's not how we configured it and not how the PMDG should be refueled.

[pinolo1978]

even selecting the quantity to be loaded via gsx nothing happens

The way the airplane is setup by default, you are not supposed to even see the GSX menu with the quantity! That's not how we configured it and not how the PMDG should be refueled.

ok but reading the manual it says to set a minimum quantity of fuel and once the truck arrives, to set the quantity. I did this but nothing changes, so is there a guide to read step by step in addition to the manual? because I can't make it work.