"Baggage loading in progress" forever?! **SOLVED**

[Wojtek]

Hello,
After the new update I have two problems:
The voice of the passengers appears before the opening of the door and the arrival of the bus.
(The signal to open the door and the number of boarded passengers appears after the arrival of the bus).
Later the bus leaves, baggage is loaded, all baggage vehicles move back and stand, and in GSX Window still,infinitely long "Baggage loading in progress"!!
The Staircase does not move back. Regardless of the airport and aircraft.
I waited 10 minutes,20 minutes and nothing.I can not push back etc.
I changed nothing in the settings and gsx.cfg of airplanes.
The GSX reinstall did not help anything.
Previously I had no problems with GSX.
Regards
wojtek
Sorry for my English.

[Er!k]

I am experiencing the same issue with the latest update. Did a flight from FSDT CYVR with the QW787, and indeed bagage keeps loading forever. I restarted couatl in order to restart GSX to push back.

[Wojtek]

Of course, you can restart the GSX and everything works well until the end - deboarding on destination airport.
But boarding is broken 

[virtuali]

I still cannot reproduce this.  Please indicate the precise, exact, reproduction steps, with the complete order of operations, from the 1st one on the 1st airport, to the last one on the 2nd airport.

And please clarify what do you mean with "boarding is broken". Do you mean if you don't restart Couatl at arrival, or always ?

[Wojtek]

So:
1.Request catering service:
trucks come and go back - everything ok.
2.Request refueling - also all ok.
3.Request boarding:
-immediately you can hear voices of the passengers - all doors closed,the bus has not arrived yet.
-The loading of luggage continues normally. All vehicles and stairs going to the aircraft.
-Bus arrives and on the green bar you will see number of boarded passengers.
-Boarding complete, bus leaves back, all baggage vehicles move back and stand and we have a green bar "Baggage loading in progress"
I'm waiting and nothing, you can't go to "Prepare for push-back..." You must now restart Couatl and now from "Prepare for push-back..." everything works ok until the end of the flight (follow me and deboarding ok).
regards
wojtek

[Er!k]

Same behaviour on my side. Start the sim at CYVR:
- Dock jetways
- Load passengers
- Load baggage

After everything is clear visually the back stairs remain at the door (4L at the QW787), but cargo equipment is removed from the aircraft. No further movement...

[jockoflocko]

I am also having this same problem.

[virtuali]

Same behaviour on my side. Start the sim at CYVR:
- Dock jetways
- Load passengers
- Load baggage

After everything is clear visually the back stairs remain at the door (4L at the QW787), but cargo equipment is removed from the aircraft. No further movement...

I tried doing exactly the same, at CYVR Gate A3, using a default A321, since I don't have the QW787 and, it worked normally and after baggage was loaded, all vehicles cleared the airplane and the message that boarding ended came, together with a prompt to close the exits, so I could call pushback.

Since the only thing different is you using the QW787, perhaps there a problem in its configuration, which is not included in GSX yet so, either you made it or someone else made it, and there might be something unusual in it.

[virtuali]

So:
1.Request catering service:
trucks come and go back - everything ok.
2.Request refueling - also all ok.
3.Request boarding:
-immediately you can hear voices of the passengers - all doors closed,the bus has not arrived yet.
-The loading of luggage continues normally. All vehicles and stairs going to the aircraft.
-Bus arrives and on the green bar you will see number of boarded passengers.
-Boarding complete, bus leaves back, all baggage vehicles move back and stand and we have a green bar "Baggage loading in progress"

I tried it just now and no, it doesn't happen here: No passenger voices can be heard until the bus comes and you open the Exit 1. When the last passenger number goes to the last value,  the bus goes away and it ask to close the exits and boarding ends normally.

Could you please tell me exactly:

- How many passengers were counted

- Your time settings, how many seconds per passenger in boarding and deboarding, and the minumum time ?

[necrofago]

My problem, baggage loading and unloading in progress for ever, and the baggage vehicles not shows. Use the Carenado B1900D

[Jamerikid]

Same problem with the NGX. My routine is:
Jetway
Fuel
Catering
Boarding

Everything works perfect, I just don’t get the passenger boarding complete message like I used to and the rear stairs vehicle is at a stand still and I can’t select pushback until boarding is complete.

[Wojtek]

Could you please tell me exactly:

- How many passengers were counted

- Your time settings, how many seconds per passenger in boarding and deboarding, and the minumum time ?

TDS B738 MAX 180/180 Pax,
Deboarding Minimum time - 120 s
Time/Passenger - 1.0
Boarding the same
Always I was set so .

[virtuali]

TDS B738 MAX 180/180 Pax,
Deboarding Minimum time - 120 s
Time/Passenger - 1.0
Boarding the same
Always I was set so .

Did the same with the default 737, and the same settings, no problems whatsoever. Jetway, Fuel, Catering, Boarding, all working fine. Boarding ends normally.

Is that a freeware airplane ? If yes, please provide some download links, and attach your GSX.CFG for it.

[Wojtek]

Did the same with the default 737, and the same settings, no problems whatsoever. Jetway, Fuel, Catering, Boarding, all working fine. Boarding ends normally.

Is that a freeware airplane ? If yes, please provide some download links, and attach your GSX.CFG for it.

TDS is freeware but now I have tested the Wilco FeelThere EMB175 and the same problem.

[aircraft]
nosegear = 16.22
refueling = 1
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 1.80 -3.43 0.00
wingtippos = 17.91 -7.01 0.00
fuelpos = 0.00 0.00 0.00
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -5.08 5.40 0.00
engine2pos = 5.08 5.40 0.00
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -1.72 15.30 0.28 1.00
code = 1
name = Exit Front

[exit2]
pos = -1.47 -10.80 0.33 -10.00
code = 3
name = Exit Rear

[exit3]
remove = 1

[exit4]
remove = 1

[service1]
flip = 1
code = 4
name = Front Service

[service2]
flip = 4
code = 4
name = Rear Service

[cargo1]
pos = 1.00 11.80 -0.97 0.00
code = 2
name = Cargo FWD
uldcode = AUTO

[cargo2]
pos = 1.00 -7.10 -0.91 5.00
code = (L:Tds2BEXIT_SW,bool)
name = Cargo AFT
uldcode = AUTO

[cargomain]
remove = 1

[virtualstuff]

Same problem here with theFSLABS A320