Author Topic: Buildings gone at all airports  (Read 15712 times)

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51367
    • VIRTUALI Sagl
Re: Buildings gone at all airports
« Reply #15 on: September 19, 2011, 08:17:02 pm »
Yes i did all these things but still no success.

You still haven't replied to my questions:

1) do you have BOTH the Addon Manager AND the Couatl menus inside FSX ? Just one (which one), both of them, or none at all ?

2) Have you been asked to trust them after you reinstalled the scenery AFTER having uninstalled replying YES when asked if you want to remove the Addon Manager and the Couatl Engine ?

Bernhard45

  • Newbie
  • *
  • Posts: 7
Re: Buildings gone at all airports
« Reply #16 on: September 19, 2011, 08:39:11 pm »
Yes for items 1) and 2)

My antivirus programm is Kaspersky 2012 and I set the whole FSX folder off for scanning. Additional I stopped the whole antivirus programm and the reinstalled KLAX as in 1) and 2) described. No success

Bernhard

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51367
    • VIRTUALI Sagl
Re: Buildings gone at all airports
« Reply #17 on: September 19, 2011, 08:44:44 pm »
My antivirus programm is Kaspersky 2012 and I set the whole FSX folder off for scanning. Additional I stopped the whole antivirus programm and the reinstalled KLAX as in 1) and 2) described. No success

Since you are seeing both menus, it means the programs are running, so the antivirus is not an issue, otherwise you wouldn't see any menu.

Open the Notepad and type the following on a new blank file:

logFile=couatl.log

(please note logFile is written beginning with a lower case l and a capital F )

Save the file as couatl.ini in the FSX\fsdreamteam\couatl folder, so it stays at the same level of the couatl.exe

Run FSX, go to KLAX, wait a bit, then quit FSX.

Check if you have a couatl.log file in the FSX\fsdreamteam\couatl folder and post its content here.


Bernhard45

  • Newbie
  • *
  • Posts: 7
Re: Buildings gone at all airports
« Reply #18 on: September 19, 2011, 09:01:21 pm »
This is the contents of the log-file:


couatl v2.0 (build 2179)
log started on Mon Sep 19 20:56:44 2011

connecting to SimConnect...
connected to FSX
bglmanx non ready yet, waiting.
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 15 AddOn(s)
Loading addon ZurichX
Addon ZurichX loaded
Loading addon OHareX
Addon OHareX loaded
Loading addon JFK
Addon JFK loaded
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon ParkMe
Addon ParkMe loaded
Loading addon LSGG
Addon LSGG not installed or missing one or more files, skipping
Loading addon KLAS
Addon KLAS loaded
Loading addon KFLL
Addon KFLL not installed or missing one or more files, skipping
Loading addon PHNL
Addon PHNL not installed or missing one or more files, skipping
Loading addon KDFW
Addon KDFW loaded
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon KLAX
Addon KLAX loaded
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
Starting system monitors
Loading aircraft data from Airplanes\Aircreation_582SL
SharedMemInterface connected
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_ctr'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_ctr_e'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t6'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t6_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t1'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t1_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t5'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t5_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t4'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t4_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t7'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t7_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t8'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t8_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t2'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t2_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t3'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_t3_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_brd'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_road1'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng1'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng2'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng3'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng4'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng4_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng5'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng5_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng6'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng6_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng7_lgh'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng7'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng8'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng9'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng10'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng11'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng12'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_hng13'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_fw'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_fw1'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_inout'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_finger_s'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
Error: exception CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'KLAX_pylon_01'
disconnected from SimConnect.

Bernhard45

  • Newbie
  • *
  • Posts: 7
Re: Buildings gone at all airports
« Reply #19 on: September 19, 2011, 09:26:54 pm »
Problem is resolved ! IT WAS MY FAULT - EXCUSE ME

As you can see in my fsx.config i have send some simobjects to my 4 GB Ramdisk for better Performance. This Ram disk is using a image from the simoject folder. After installation of KLAX i did not refresh this image.

Sorry and thanks for your help

Bernhard

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51367
    • VIRTUALI Sagl
Re: Buildings gone at all airports
« Reply #20 on: September 19, 2011, 10:20:30 pm »
This is the contents of the log-file:

Ok, a look at the log, and another look at your fsx.cfg solved the issue.

EVERYTHING IS WORKING, from our side, but you have moved your Simobject folders outside the FSX folder into the H: drive. This won't work with any of our sceneries, the Simobjects needs to stay in the FSX default folder.

AT LEAST, if you don't want to move back all the Simobjects folder, restore the correct location for the Simobjects\Misc folder in the FSX.CFG

eham8

  • Newbie
  • *
  • Posts: 3
Re: Buildings gone at all airports
« Reply #21 on: September 22, 2011, 04:32:09 pm »
Hi Umberto,

I have the exact same issue as described before in this thread by Bernhard, no buildings, only jetways. I checked and followed all the items you suggested including re-installing the scenery, I have the Addon Manager and the Couatl menus inside the FSX Add-ons menu.

So I created the Couatl logfile and it shows this:

couatl v2.0 (build 2183)
log started on Thu Sep 22 16:24:07 2011

connecting to SimConnect...
connected to FSX
bglmanx non ready yet, waiting.
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 15 AddOn(s)
Loading addon ZurichX
Addon ZurichX loaded
Loading addon OHareX
Addon OHareX loaded
Loading addon JFK
Addon JFK loaded
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon ParkMe
Addon ParkMe loaded
Loading addon LSGG
Addon LSGG loaded
Loading addon KLAS
Addon KLAS loaded
Loading addon KFLL
Addon KFLL loaded
Loading addon PHNL
Addon PHNL loaded
Loading addon KDFW
Addon KDFW loaded
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon KLAX
Error: while loading addon KLAX, traceback follows
Traceback (most recent call last):
  File "<string>", line 53, in loadAddons
  File "couatl\KLAX\__init__.py", line 12, in <module>
NameError: name 'DynamicSceneryObject' is not defined
Loading addon ENBR
Addon ENBR loaded
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
SharedMemInterface connected
Starting system monitors
Loading aircraft data from Airplanes\C172
Using aircraft data from aircraftDb.py
disconnected from SimConnect.

There is obviously an issue when loading KLAX. My question is, can you please explain how I can fix this?

eham8


virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51367
    • VIRTUALI Sagl
Re: Buildings gone at all airports
« Reply #22 on: September 22, 2011, 04:40:56 pm »
I have the exact same issue as described before in this thread by Bernhard, no buildings, only jetways. I checked and followed all the items you suggested including re-installing the scenery, I have the Addon Manager and the Couatl menus inside the FSX Add-ons menu.

No, you have an entirely different problem. Bernhard problem was due because he moved all the Simobject folders outside FSX.

KLAX doesn't have any loading problems, your issues seems to be that you have installed another older scenery after KLAX. If you do this, as explained in other threads, you need to download and install the latest Stand-Alone Addon Manager for FSX OR Reinstall KLAX.

Whenever there have issues like this, as a first solution, always try to download and install the latest Stand-Alone Addon Manager as the last step you do.

eham8

  • Newbie
  • *
  • Posts: 3
Re: Buildings gone at all airports
« Reply #23 on: September 22, 2011, 05:04:07 pm »
First of all, thanks for your quick reply.  :)
I installed the latest Stand-Alone Manager (Stupid me, I thought I had the latest version, but obviously not.  ;)) and that fixed the issue.

Cheers,
eham8