« previous next »
Pages: [1]

Author Topic: GSX with ConcordeX **SOLVED**  (Read 4838 times)

ampharoah

  • Newbie
  • *
  • Posts: 41
GSX with ConcordeX **SOLVED**
« on: February 12, 2015, 10:46:52 pm »
Hi,

Please can anyone advise.

I have GSX and have just added ConcordeX to my fleet

When I request catering, a small van pulls up, not the necessary hydraulic cabin vehicle that reaches up to the door.

Luggage trucks arrive,but no conveyor belt vehicle to reach up to that door.

Nothing resembles pictures that I have seen of the correct GSX vehicles in attendance.

What am I doing wrong please?

Thanks in anticipation

Andrew
« Last Edit: February 14, 2015, 05:52:47 pm by virtuali »
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50710
    • VIRTUALI Sagl
Re: GSX with ConcordeX
« Reply #1 on: February 13, 2015, 10:31:26 am »
The FSLabs Concorde is internally supported by GSX, which means it will work without requiring a configuration. Perhaps you TRIED to configure it and made some kind of error ?

In this case, use the "Reset" button in the airplane configuration editor to restore to the default configuration that comes with GSX.

Also, check you don't have any GSX.CFG files you might have downloaded in the airplane root folder under Simobjects\Airplanes
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #2 on: February 13, 2015, 01:41:33 pm »
Hi

Thanks for your reply,

I am not aware of making any configuration changes anywhere. Do you mean somewhere within ConcordeX or somewhere within GSX? Either way i don't think I configured anything, anywhere.

I also checked for GSX.CFG files in FlightSimulatorX/SimObjects/Airplanes and found nothing.

 What should I do next?

Regards

Andrew
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50710
    • VIRTUALI Sagl
Re: GSX with ConcordeX
« Reply #3 on: February 13, 2015, 02:38:11 pm »
I can only repeat and confirm that, if you haven't tried to customize anything in GSX, the airplane will work normally.

Have you changed the name of the airplane folder ? Do you have a new variant that has been released after the product was originally released ? Try to enable Logging in the "Troubleshooting" page of the GSX - Settings menu, select the Concorde and then exit from FSX.

Check your %APPDATA%\Virtuali\ folder and post the Couatl.LOG that will be produced there.
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #4 on: February 13, 2015, 04:53:10 pm »
Hi again,

I can confirm that I have not changed the name of the Airplane folder.

I am using the latest ConcordeX release and I believe the latest GSX

Here is the log:

couatl v2.0 (build 2370)
log started on Fri Feb 13 15:41:44 2015

connecting to SimConnect...
connected to FSX
bglmanx non ready yet, waiting.
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 22 AddOn(s)
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon OHareX
Addon OHareX loaded
Loading addon KDFW
Addon KDFW loaded
Loading addon LSGG
Addon LSGG loaded
Loading addon GSX
Initializing audio...
Detected failed previous attempt to enumerate audio devices: disabling audio
Current sim directory is C:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
  using Scenery/World/scenery (layer 1)
  using Scenery/BASE/scenery (layer 2)
  using Scenery/0000/scenery (layer 4)
  using Scenery/0001/scenery (layer 5)
  using Scenery/0002/scenery (layer 6)
  using Scenery/0003/scenery (layer 7)
  using Scenery/0004/scenery (layer 8)
  using Scenery/0005/scenery (layer 9)
  using Scenery/0006/scenery (layer 10)
  using Scenery/0007/scenery (layer 11)
  using Scenery/0100/scenery (layer 12)
  using Scenery/0101/scenery (layer 13)
  using Scenery/0102/scenery (layer 14)
  using Scenery/0103/scenery (layer 15)
  using Scenery/0104/scenery (layer 16)
  using Scenery/0105/scenery (layer 17)
  using Scenery/0106/scenery (layer 18)
  using Scenery/0107/scenery (layer 19)
  using Scenery/0200/scenery (layer 20)
  using Scenery/0201/scenery (layer 21)
  using Scenery/0202/scenery (layer 22)
  using Scenery/0203/scenery (layer 23)
  using Scenery/0204/scenery (layer 24)
  using Scenery/0205/scenery (layer 25)
  using Scenery/0206/scenery (layer 26)
  using Scenery/0207/scenery (layer 27)
  using Scenery/0300/scenery (layer 28)
  using Scenery/0301/scenery (layer 29)
  using Scenery/0302/scenery (layer 30)
  using Scenery/0303/scenery (layer 31)
  using Scenery/0304/scenery (layer 32)
  using Scenery/0305/scenery (layer 33)
  using Scenery/0306/scenery (layer 34)
  using Scenery/0307/scenery (layer 35)
  using Scenery/0400/scenery (layer 36)
  using Scenery/0401/scenery (layer 37)
  using Scenery/0402/scenery (layer 38)
  using Scenery/0403/scenery (layer 39)
  using Scenery/0404/scenery (layer 40)
  using Scenery/0405/scenery (layer 41)
  using Scenery/0406/scenery (layer 42)
  using Scenery/0407/scenery (layer 43)
  using Scenery/0500/scenery (layer 44)
  using Scenery/0501/scenery (layer 45)
  using Scenery/0502/scenery (layer 46)
  using Scenery/0503/scenery (layer 47)
  using Scenery/0504/scenery (layer 48)
  using Scenery/0505/scenery (layer 49)
  using Scenery/0506/scenery (layer 50)
  using Scenery/0507/scenery (layer 51)
  using Scenery/0600/scenery (layer 52)
  using Scenery/0601/scenery (layer 53)
  using Scenery/0602/scenery (layer 54)
  using Scenery/0603/scenery (layer 55)
  using Scenery/0604/scenery (layer 56)
  using Scenery/0605/scenery (layer 57)
  using Scenery/0606/scenery (layer 58)
  using Scenery/0607/scenery (layer 59)
  using Scenery/0700/scenery (layer 60)
  using Scenery/0701/scenery (layer 61)
  using Scenery/0702/scenery (layer 62)
  using Scenery/0703/scenery (layer 63)
  using Scenery/0704/scenery (layer 64)
  using Scenery/0705/scenery (layer 65)
  using Scenery/0706/scenery (layer 66)
  using Scenery/0707/scenery (layer 67)
  using Scenery/0800/scenery (layer 68)
  using Scenery/0801/scenery (layer 69)
  using Scenery/0802/scenery (layer 70)
  using Scenery/0803/scenery (layer 71)
  using Scenery/0804/scenery (layer 72)
  using Scenery/0805/scenery (layer 73)
  using Scenery/0806/scenery (layer 74)
  using Scenery/0807/scenery (layer 75)
  using Scenery/0900/scenery (layer 76)
  using Scenery/0901/scenery (layer 77)
  using Scenery/0902/scenery (layer 78)
  using Scenery/0903/scenery (layer 79)
  using Scenery/0904/scenery (layer 80)
  using Scenery/0905/scenery (layer 81)
  using Scenery/0906/scenery (layer 82)
  using Scenery/0907/scenery (layer 83)
  using Scenery/1000/scenery (layer 84)
  using Scenery/1001/scenery (layer 85)
  using Scenery/1002/scenery (layer 86)
  using Scenery/1003/scenery (layer 87)
  using Scenery/1004/scenery (layer 88)
  using Scenery/1005/scenery (layer 89)
  using Scenery/1006/scenery (layer 90)
  using Scenery/1007/scenery (layer 91)
  using Scenery/1100/scenery (layer 92)
  using Scenery/1101/scenery (layer 93)
  using Scenery/1102/scenery (layer 94)
  using Scenery/1103/scenery (layer 95)
  using Scenery/1104/scenery (layer 96)
  using Scenery/1105/scenery (layer 97)
  using Scenery/1106/scenery (layer 98)
  using Scenery/1107/scenery (layer 99)
  using J:/fsgux/ant/scenery (layer 100)
  using J:/fsgux/nam/scenery (layer 101)
  using J:/fsgux/csa/scenery (layer 102)
  using J:/fsgux/eur/scenery (layer 103)
  using J:/fsgux/afr/scenery (layer 104)
  using J:/fsgux/LocalMeshes/scenery (layer 105)
  using Scenery/AFRI/scenery (layer 106)
  using Scenery/ASIA/scenery (layer 107)
  using Scenery/AUST/scenery (layer 108)
  using Scenery/EURE/scenery (layer 109)
  using Scenery/EURW/scenery (layer 110)
  using Scenery/NAMC/scenery (layer 111)
  using Scenery/NAME/scenery (layer 112)
  using Scenery/NAMW/scenery (layer 113)
  using Scenery/OCEN/scenery (layer 114)
  using Scenery/SAME/scenery (layer 115)
  using Scenery/Cities/Oshkosh/scenery (layer 116)
  using Scenery/Cities/StMaarten/scenery (layer 117)
  using Scenery/Cities/Rio/scenery (layer 118)
  using Scenery/Cities/LasVegas/scenery (layer 119)
  using Scenery/Global/scenery (layer 120)
  using Scenery/Props/scenery (layer 121)
  using Addon Scenery/scenery (layer 123)
  using Scenery/Cities/Reno/scenery (layer 124)
  using Scenery/Cities/Istanbul/scenery (layer 125)
  using Scenery/Cities/Berlin/scenery (layer 126)
  using Scenery/Cities/Edwards_AFB/scenery (layer 127)
  using Scenery/UtExcl/scenery (layer 128)
  using Scenery/UtEurLights/scenery (layer 129)
  using Scenery/UtLcVeg/scenery (layer 130)
  using Scenery/UtLcCity/scenery (layer 131)
  using Scenery/UtLcCustEur/scenery (layer 132)
  using Scenery/UtEurRoad/scenery (layer 133)
  using Scenery/UtEurRail/scenery (layer 134)
  using Scenery/UtEurWater/scenery (layer 135)
  using Scenery/UtEurStream/scenery (layer 136)
  using Scenery/UtEurGP/scenery (layer 137)
  using Scenery/UtObjRepo/scenery (layer 138)
  using Scenery/UtWc/scenery (layer 139)
  using Scenery/UtEurAirports/scenery (layer 140)
  using Scenery/UtCanLights/scenery (layer 141)
  using Scenery/UtLcCust/scenery (layer 142)
  using Scenery/UtCanRoad/scenery (layer 143)
  using Scenery/UtCanRail/scenery (layer 144)
  using Scenery/UtCanWater/scenery (layer 145)
  using Scenery/UtCanStream/scenery (layer 146)
  using Scenery/UtCanGP/scenery (layer 147)
  using Scenery/UtCanAirports/scenery (layer 148)
  using Scenery/UtUsaLights/scenery (layer 149)
  using Scenery/UtUsaRoad/scenery (layer 150)
  using Scenery/UtUsaRail/scenery (layer 151)
  using Scenery/UtUsaWater/scenery (layer 152)
  using Scenery/UtUsaGP/scenery (layer 153)
  using C:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/pilots_software/AFM/scenery (layer 228)
  using C:/ProgramData/FlightSimTools.com/TaxiSigns HD/scenery (layer 503)
  using ORBX/FTX_OLC/OLC_EU9/scenery (layer 236)
  using ORBX/FTX_OLC/OLC_EU8/scenery (layer 237)
  using ORBX/FTX_AU/FTXAA_ORBXLIBS/scenery (layer 238)
  using MyTraffic/scenery (layer 122)
  using C:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Afd/scenery (layer 472)
  using Addon Scenery/KFHR Friday Harbor PR/scenery (layer 484)
Airport cache loaded
Addon GSX loaded
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon PHNL
Addon PHNL loaded
Loading addon JFK
Addon JFK not installed or missing one or more files, skipping
Loading addon JFK2
Addon JFK2 loaded
Loading addon KFLL
Addon KFLL loaded
Loading addon KIAH
Addon KIAH loaded
Loading addon KLAS
Addon KLAS loaded
Loading addon KLAX
Addon KLAX loaded
Loading addon ParkMe
Addon ParkMe loaded
Loading addon CYVR
Addon CYVR loaded
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon ZurichX
Addon ZurichX loaded
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
Loading addon KPHX
Addon KPHX loaded
Loading addon KIAD
Addon KIAD loaded
Loading addon KDEN
Addon KDEN loaded
Starting system monitors
Current locale is English_United Kingdom.1252
SharedMemInterface connected
Loading aircraft data from Airplanes\Aircreation_582SL
Using aircraft data from SimConnect
Loading aircraft data from Airplanes\FSLabs_BAe-Concorde
aircraftDb.py provides aircraft data with priority 2
Using aircraft data from aircraftDb.py
Loading airport KHPN from C:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/Addon Scenery/scenery/KHPN_AFX_JC.bgl
Loading aircraft data from Airplanes\Aircreation_582SL
Using aircraft data from SimConnect

Regards

Andrew
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #5 on: February 13, 2015, 05:10:12 pm »
...............additional information:

 just tested GSX with the Mad Dog MD80, works perfectly as is also the case with the NGX, so I'm sure it something specific with ConcordeX + GSX on my system.

Andrew
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #6 on: February 13, 2015, 05:23:14 pm »
Hi again,

Just noticed the following line in the report:

Initializing audio...
Detected failed previous attempt to enumerate audio devices: disabling audio

I never knew GSX had sound, (VERY EXCITING!) and now looking in to it I realize that I've been missing the 'sound' content for two years!

In addition to my ConcordeX vehicles  problem, I appear to also have a sound (or no sound) problem!

Please could we investigate this after the ConcordeX problem or should I start another thread for that please?

Thanks again

Andrew
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #7 on: February 13, 2015, 05:50:21 pm »
Apologies, Ive self fixed the sound problem - WOW what an improvement on already excellent software!

Thanks and sorry for the unnecessary side track.

Andrew
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50710
    • VIRTUALI Sagl
Re: GSX with ConcordeX
« Reply #8 on: February 14, 2015, 02:28:56 pm »
Quote
Loading aircraft data from Airplanes\FSLabs_BAe-Concorde
aircraftDb.py provides aircraft data with priority 2

Your log shows that GSX has correctly identified the airplane, and it's using its own internal data for it so, there's no reason you wouldn't see the correct vehicles. Could you please post a screenshot of what you are seeing ?
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #9 on: February 14, 2015, 04:34:02 pm »
Screen shots of ConcordeX at KHPN following Catering Request (Small van attends) Boarding (No Steps) and Luggage (No Conveyor)


Hope this helps

Andrew
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50710
    • VIRTUALI Sagl
Re: GSX with ConcordeX
« Reply #10 on: February 14, 2015, 04:36:47 pm »
Have a look at this thread, maybe that's the issue (Concorde not updating loading in the same way as standard airplane).

http://www.fsdreamteam.com/forum/index.php/topic,9671.0.html
Logged

ampharoah

  • Newbie
  • *
  • Posts: 41
Re: GSX with ConcordeX
« Reply #11 on: February 14, 2015, 05:38:45 pm »
Bingo! Fixed

Just needed some passengers to load and feed.

Thanks for tracking this one down.

Much appreciated

Andrew
Logged
Pages: [1]
« previous next »