Author Topic: GSX 1.9.9.11 - Major update  (Read 134047 times)

arpal

  • Newbie
  • *
  • Posts: 18
Re: GSX 1.9.9.11 - Major update
« Reply #30 on: February 03, 2017, 01:06:57 pm »
Hello,

I'm getting an error upon opening FSX after installation of the new update.  Please see my attached photo.

Thank you!

Hello,
Same problem here
FSX crashes If you choose to load the module, if not the game loads correctly but with no GSX
Non Steam edition


virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50659
    • VIRTUALI Sagl
Re: GSX 1.9.9.11 - Major update
« Reply #31 on: February 03, 2017, 02:00:02 pm »
FSX crashes If you choose to load the module, if not the game loads correctly but with no GSX

Restart Windows and reinstall. ALWAYS allow to load the module and ALWAYS ignore the message.

Daniel.Burke01

  • Newbie
  • *
  • Posts: 48
Re: GSX 1.9.9.11 - Major update
« Reply #32 on: February 03, 2017, 03:23:12 pm »
Hello,

I did restart and reinstall.  Still receive the same error and the same fatal error crash with FSX.  (NOT steam).  I am running installation and FSX as Admin.  No virus protection is running.

pusser_uk

  • Newbie
  • *
  • Posts: 9
Re: GSX 1.9.9.11 - Major update
« Reply #33 on: February 03, 2017, 03:52:28 pm »
Thank you for the update. I wonder if you can tell me why my installation has stalled at this point?

https://www.dropbox.com/s/zju5obj5mcocp0c/GSX_hangup.jpg?dl=0

The installation has stopped at this point and not progressed for 30 minutes.
I am using Windows 7 Pro

So, after an hour with no response from my computer, I closed down the window showing the SODE Platform Manager and the installation carried on to complete. Everything suggested "WAIT" so I waited. I wonder why the installation wanted that particular window to be closed before it would carry on?

Eirbus06

  • Newbie
  • *
  • Posts: 1
Re: GSX 1.9.9.11 - Major update
« Reply #34 on: February 03, 2017, 05:01:37 pm »
Good Afternoon,
                       I have downloaded the update and it is working great with the Passenger PMDG 747 V3 but it does not find the correct doors on the Freighter version. Both cargo lifters proceed to the rear aft cargo door and ask for entry 2 to be opened.

Kind Regards,
Bryan.

33Bernard

  • Newbie
  • *
  • Posts: 3
Re: GSX 1.9.9.11 - Major update
« Reply #35 on: February 03, 2017, 10:03:37 pm »
Hello,
I have the same problem.
FSX crashes If Ichoose to load the module whith this message : "bglmanx.dll. Entry point Not found
The procedure entry point K32num Process Modules could not be located in the dybamic library kernel32.dll"

If not, the game loads correctly without GSX.

I restart windows (VISTA) and run the full GSX Insraller as administrator. The result is the same.

noto1125

  • Newbie
  • *
  • Posts: 16
Re: GSX 1.9.9.11 - Major update
« Reply #36 on: February 04, 2017, 12:32:02 am »
Greeting's All,

I got this following error after installing v1.9.11 and requested de-icing (it happen at the point the trucks came and was about to select fluid type). I gave the option to restart Coulat and to download the Stand Alone Addon Manager.

couatl v3.1 (build 3625)
panic log started on Fri Feb 03 14:50:57 2017

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\common\fsm.py", line 73, in executeDoFuncToCompletion
  File "couatl\GSX\assistanceServices\__init__.py", line 1407, in do
AttributeError: 'Departure' object has no attribute 'temperature'
{'Airport': 'LOWW', 'Requested assistance services at': 'Gate F 12', 'User Pos': (48.11890824596235, 16.567611048064418, 187.37 m, 4.48974 m, 205.7686021608206)}


Considering it was after installing the new version from the full installer, do I still need to download the addon manager?

UPDATE:

I tried a second flight, same airport different gate and aircraft. The first was with Aerosoft A319 and the second with PMDG B777. Got an error at the same stage of flight prep, de-icing. see log below.

couatl v3.1 (build 3625)
panic log started on Fri Feb 03 18:19:18 2017

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\common\fsm.py", line 73, in executeDoFuncToCompletion
  File "couatl\GSX\assistanceServices\__init__.py", line 1407, in do
AttributeError: 'Departure' object has no attribute 'temperature'
{'Airport': 'LOWW', 'Requested assistance services at': 'Gate C 36', 'User Pos': (48.11941666829855, 16.555850005415177, 187.118 m, 4.23783 m, 65.40201710989399)}
« Last Edit: February 04, 2017, 03:50:17 am by noto1125 »

dnagato

  • Newbie
  • *
  • Posts: 8
Re: GSX 1.9.9.11 - Major update
« Reply #37 on: February 04, 2017, 01:01:40 am »
I spended a lot of money in all FSD, after update a lost all, sorry I´m not happy with this, I will think before buy my next FSD. To let know, I tryed all solution proposted here, no sucess!

canadagoose

  • Jr. Member
  • **
  • Posts: 78
Re: GSX 1.9.9.11 - Major update
« Reply #38 on: February 04, 2017, 06:20:11 am »
Major Update...More like a MAJOR Disaster.

Flieger59

  • Newbie
  • *
  • Posts: 10
Re: GSX 1.9.9.11 - Major update
« Reply #39 on: February 04, 2017, 12:17:51 pm »
The solution:
Uninstall GSX
Interrupt the Internet connection
GSX FSX Setup Exe (older version) as Addmin run
After that it should run again
With the "Major Update" it does not run
Here it worked so well
Good luck

Ps. Kindly supported by User RZI 2001  ;)
« Last Edit: February 04, 2017, 12:37:01 pm by Flieger59 »

Mischka43

  • Newbie
  • *
  • Posts: 13
Re: GSX 1.9.9.11 - Major update
« Reply #40 on: February 04, 2017, 01:02:20 pm »
No solution, sorry, but it can't work:
GSX installer ALLWAYS tries to connect to home server to get data for installation, and if it can't connect, no data are avalialbe for installation, it simply hangs.
I just tried, to be sure, and it happend just like this.

Virtuali must rework the GSX update, there is a heavy bug inside.

Greetings,
Michael

kozu

  • Newbie
  • *
  • Posts: 4
Re: GSX 1.9.9.11 - Major update
« Reply #41 on: February 04, 2017, 02:38:16 pm »
Agreed

HB-JHK

  • Newbie
  • *
  • Posts: 47
Re: GSX 1.9.9.11 - Major update
« Reply #42 on: February 04, 2017, 03:37:04 pm »
Have the same problem as well:

couatl v3.1 (build 3625)
panic log started on Sat Feb 04 15:36:12 2017

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\common\fsm.py", line 73, in executeDoFuncToCompletion
  File "couatl\GSX\assistanceServices\__init__.py", line 825, in do
AttributeError: 'module' object has no attribute 'gsx'
{}
User collision geometries reloaded

Psolov

  • Newbie
  • *
  • Posts: 27
Re: GSX 1.9.9.11 - Major update
« Reply #43 on: February 04, 2017, 03:43:02 pm »
This update broke all of my FSDT airports, and I have every one of them. Installed the update and then went to 5 different FSDT airports in FSX-SE and some only have jetways (not attached to anything) and others have nothing. Basically, the airports look like a blank space. There was no effect on my non-FSDT airports however, but I'm hoping this can get fixed shortly.

Cheers, Pete

williamburgess

  • Newbie
  • *
  • Posts: 6
Re: GSX 1.9.9.11 - Major update
« Reply #44 on: February 04, 2017, 09:30:21 pm »
GSX version 1.9.11 has been released, with several new features, and lots of reported bugs fixed. Here's the list of changes:

- Icing conditions detection more realistic, now based on Temperature + Dew Point.
- Deicing pads added to Zurich and O'Hare.
- Refueling starts by filling wings tanks first, then the central ones and finally externals.
- Preset Fuel quantities indicated in USGAL and Lb/Kg (depending on International settings).
- Automatic detection of 3rd party progressive refuel simulation made optional in GSX - Settings.
- Support for Prepar3D 3.4.22 (Hotfix 3).
- Support for the PMDG 747-400 V3.
- Don't remove PMDG Ground Equipment around the airplane by default.
- Airplane Configuration: Don't display traffic cones if engine z < -100 meters. Used by the Concorde.
- New Ground Operators added: Aegean, Air Asia, Brussels South Charleroi, EVA Air. REQUIRES Downloading the Vehicles Update or the Full GSX Installer.
- More precise collision detection at KMEM.
- Bugfix: Refueling not stopping anymore when quantity requested exceeded the tanker capacity and the "Multiple Trips" option was disabled.
- Bugfix: Departure (PushBack) queuing.
- Bugfix: Random operators appearing when parking has no codes.
- Bugfix: Progressive refueling requested by custom aircraft system, activated only if aircraft is parked.

To install the new update, you have two options:

- Download the latest Full installer, which contains everything.

OR

- Download the latest Stand-Alone Addon Manager and the latest Vehicles Update from the GSX page.