Author Topic: kfll ctd problem solved  (Read 7331 times)

feer

  • Full Member
  • ***
  • Posts: 151
kfll ctd problem solved
« on: August 20, 2011, 10:55:07 am »
Hi fsdt yesterday installed fll i turn antivirust off during install . scenry load with all buildings but a few seconds crash and close fsx the scenery is activated and the last add on manager is installed too any idea what happend here regards feer
« Last Edit: August 20, 2011, 09:10:44 pm by feer »
Intel Core i7-2600K Sandy Bridge 2nd generation @ 4.0ghz
gigabyte p67a-ud3. patriot viper series 3 8gb ddr3 1600mhz
cpu fan Cooler Master's V6GT
MSI GTX 560TI  1GB 256-BIT @1000mhz  GDDR5
samsung 26 '' t260hd

feer

  • Full Member
  • ***
  • Posts: 151
Re: kfll ctd problem
« Reply #1 on: August 20, 2011, 08:15:08 pm »
error at star up at fll below


Problem signature:
  Problem Event Name:   APPCRASH
  Application Name:   fsx.exe
  Application Version:   10.0.61472.0
  Application Timestamp:   475e17d3
  Fault Module Name:   nvd3dum.dll
  Fault Module Version:   8.17.12.7061
  Fault Module Timestamp:   4d9e7b5d
  Exception Code:   c0000005
  Exception Offset:   003a48f4
  OS Version:   6.1.7600.2.0.0.256.1
  Locale ID:   1033
  Additional Information 1:   0a9e
  Additional Information 2:   0a9e372d3b4ad19135b953a78882e789
  Additional Information 3:   0a9e
  Additional Information 4:   0a9e372d3b4ad19135b953a78882e789

i need a big help here guys this make me crazy lol regards feer..
Intel Core i7-2600K Sandy Bridge 2nd generation @ 4.0ghz
gigabyte p67a-ud3. patriot viper series 3 8gb ddr3 1600mhz
cpu fan Cooler Master's V6GT
MSI GTX 560TI  1GB 256-BIT @1000mhz  GDDR5
samsung 26 '' t260hd

feer

  • Full Member
  • ***
  • Posts: 151
Re: kfll ctd problem solved
« Reply #2 on: August 20, 2011, 09:12:51 pm »
fsdt i founded the problem was this setting in fsx cfg

[BufferPools]
UsePools=0 
RejectThreshold=102400
PoolSize=2097152
 my video  not like this setting to much regards feer...
Intel Core i7-2600K Sandy Bridge 2nd generation @ 4.0ghz
gigabyte p67a-ud3. patriot viper series 3 8gb ddr3 1600mhz
cpu fan Cooler Master's V6GT
MSI GTX 560TI  1GB 256-BIT @1000mhz  GDDR5
samsung 26 '' t260hd

Silverbird

  • Hero Member
  • *****
  • Posts: 650
Re: kfll ctd problem solved
« Reply #3 on: August 20, 2011, 11:03:34 pm »
fsdt i founded the problem was this setting in fsx cfg

[BufferPools]
UsePools=0 
RejectThreshold=102400
PoolSize=2097152
 my video  not like this setting to much regards feer...


hmm you were using bp 0 I'm surprised the 560ti doesn't handle it well?
Cesar

New Jersey EWR

feer

  • Full Member
  • ***
  • Posts: 151
Re: kfll ctd problem solved
« Reply #4 on: August 21, 2011, 12:33:09 am »
Quote
hmm you were using bp 0 I'm surprised the 560ti doesn't handle it well? 
yes sir my pc recently restored and put the settings and the gtx 560 you did not like me much crash with kfll. only bad  symptom but not very good lol and leave it in this [BufferPools]
RejectThreshold = 98304. got  ;) ;) 40pfs so consistently good performance with the new PMDG 737 NGX feer .. thanks greetings Silverbird
Intel Core i7-2600K Sandy Bridge 2nd generation @ 4.0ghz
gigabyte p67a-ud3. patriot viper series 3 8gb ddr3 1600mhz
cpu fan Cooler Master's V6GT
MSI GTX 560TI  1GB 256-BIT @1000mhz  GDDR5
samsung 26 '' t260hd

Silverbird

  • Hero Member
  • *****
  • Posts: 650
Re: kfll ctd problem solved
« Reply #5 on: August 21, 2011, 01:49:43 am »
Quote
hmm you were using bp 0 I'm surprised the 560ti doesn't handle it well? 
yes sir my pc recently restored and put the settings and the gtx 560 you did not like me much crash with kfll. only bad  symptom but not very good lol and leave it in this [BufferPools]
RejectThreshold = 98304. got  ;) ;) 40pfs so consistently good performance with the new PMDG 737 NGX feer .. thanks greetings Silverbird

Hi Feer sounds good :) still have too get the ngx and the gtx560ti have to give that RejectThreshold a shot cheers.  :)
Cesar

New Jersey EWR

feer

  • Full Member
  • ***
  • Posts: 151
Re: kfll ctd problem solved
« Reply #6 on: August 21, 2011, 03:47:42 am »
Quote
Hi Feer sounds good  still have too get the ngx and the gtx560ti have to give that RejectThreshold a shot cheers.   
thanks my riend the ngx is a good 737 in systems at all times and the gtx 560 ti works good but not like too much the [BufferPools]
UsePools=0 
RejectThreshold=102400
PoolSize=2097152          at this settings lol regards feer..
Intel Core i7-2600K Sandy Bridge 2nd generation @ 4.0ghz
gigabyte p67a-ud3. patriot viper series 3 8gb ddr3 1600mhz
cpu fan Cooler Master's V6GT
MSI GTX 560TI  1GB 256-BIT @1000mhz  GDDR5
samsung 26 '' t260hd