FBW A380X GSX Profile

[7heAngryVe7eran]

Here are my GSX coordinates for the FBW A380X.

As always, if something doesn't look right, just let me know.

Choose Customize Airplane option from the GSX Menu.

Enter the settings below...

Nosegear
-Nosegear Distance 30.30

Passenger Door #1
Door with open/close checks as Standard Door #3
Passengers Door 1
-Position (m) -3.54 18.64 3.54
-Ceiling Height (m) 1.68
-Width (m) 0.81
-Angle (deg) 0.00

Cargo Main
-No door at this position

Passenger Door #2
Door with open/close checks as Standard Door #1
Passengers Door 2
-Position (m) -3.08 28.90 3.54
-Ceiling Height (m) 1.68
-Width (m) 0.81
-Angle (deg) 9.00

Engine #1
-Position (m) -25.70 2.20 2.26

Engine #2
-Position (m) -14.88 10.10 1.60

Pax3
-No door at this position

Passenger Door #4
Door with open/close checks as Standard Door #9
Passengers Door 4
-Position (m) -3.14 -18.64 3.74
-Ceiling Height (m) 1.68
-Width (m) 0.81
-Angle (deg) -8.00

GPU
-Position (m) 6.80 29.32 1.00

Service Door #1
Door with open/close checks as Standard Door #4
Service Door 1
-Position (m) -3.46 18.66 3.50
-Ceiling Height (m) 1.68
-Width (m) 0.81
-Angle (deg) 0.00

Cargo Door #1
Custom Check (L:A32NX_FWD_DOOR_CARGO_POSITION, number) 80 >
Cargo Door 1
-Position (m) 1.48 23.34 1.28
-Ceiling Height (m) 3.30
-Width (m) 3.11
-Angle (deg) 0.00
-ULD Code AAF, AAP, AKE, ALF ALP, AMP, PLA, PMC, QKE

Engine #3
-Position (m) 14.88 10.10 1.60

Engine #4
-Position (m) 25.70 2.20 2.26

Deicer In
-Position (m) 6.36 1.62 3.00

Deicer Out
-Position (m) 37.86 -12.92 4.88

Fuel
Refueling point
-Position (m) 18.30 2.76 4.20

Cargo Door #2
Custom Check (L:A32NX_AFT_DOOR_CARGO_POSITION, number) 80 >
Cargo Door 2
-Position (m) 1.48 23.34 1.28
-Ceiling Height (m) 1.75
-Width (m) 2.79
-Angle (deg) 0.00
-ULD Code AAF, AAP, AKE, ALF ALP, AMP, PLA, PMC, QKE

Service Door #2
Door with open/close checks as Standard Door #10
Service Door 2
-Position (m) 3.04 -18.60 3.80
-Ceiling Height (m) 1.68
-Width (m) 0.81
-Angle (deg) 8.00

Lavatory
-Position (m) -0.25 -18.26 2.40

Water
-Position (m) -0.25 -18.26 2.40

Show MSFS "Fuel and Cargo" during refueling - NO
Cargo Airplane - NO
Use GSX Traffic Cones - YES
Battery - NO
pushbackRaise - NO
pushbackDummyEvent - NO
Ignore icing condition Pushback - NO
Ceiling height (m) 2.54
Icao type - A388
Parking brakes test - (L:A32NX_PARK_BRAKE_LEVER_POS,number) (L:A32NX_GND_EQP_IS_VISIBLE, number) ||

[BrianT58]

Thanks very much for this, I think there is an issue with your Cargo 2 Coordinates though. with your settings both loaders went to Door 1

I changed it to this and it seems to be correct (but it is the first time I've done one)

Cargo Door #2
Custom Check (L:A32NX_AFT_DOOR_CARGO_POSITION, number) 80 >
Cargo Door 2
-Position (m) 1.36 -13.04 -1.03
-Ceiling Height (m) 1.75
-Width (m) 2.79
-Angle (deg) 0.10
-ULD Code AAF, AAP, AKE, ALF ALP, AMP, PLA, PMC, QKE

[7heAngryVe7eran]

Thanks for letting me know! I maybe have been looking at the wrong information when I was typing! I'll be sure to fix it soon.

[BrianT58]

Double check it though. As I said it's my first time playing about with stuff like this and I may be talking out of my rear!