Products Support > GSX Sharing area - Airplane Configs

QualityWings Boeing 787 Configuration

<< < (2/7) > >>

Captain Kevin:
Updated configuration. Repositioned the catering trucks to the R1 and R2 position and added the bulk cargo.

787-8:

[aircraft]
nosegear = 20.93
refueling = 1
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.01 3.11 0.25
wingtippos = 25.89 -9.57 2.75
fuelpos = -14.92 -0.94 1.28
waterpos = -0.02 -17.04 -1.31
lavatorypos = -0.01 -8.55 0.00
engine1pos = -9.96 5.60 -1.34
engine2pos = 9.96 5.59 -1.35
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -2.40 19.98 0.67 10.70
code = 1
name = Door L1

[exit2]
pos = -2.75 11.28 0.67 0.70
code = 2
name = Door L2

[exit3]
remove = 1

[exit4]
pos = -2.39 -16.64 0.67 -7.80
code = 4
name = Door L4

[service1]
pos = 2.58 20.21 0.70 -8.70
code = (L:DoorR1, bool)
name = Door R1

[service2]
pos = 2.77 11.20 0.68 -0.00
code = (L:DoorR2, bool)
name = Door R2

[cargo1]
pos = 1.72 15.36 -1.24 0.00
code = 4
name = Forward Cargo Door
uldcode = AKE

[cargo2]
pos = 1.72 -10.38 -1.29 -0.40
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AKE

[cargomain]
pos = -1.52 -14.82 -1.29 -14.00
code = (L:QW_CargoDoor_Bulk, bool)
name = Bulk Cargo Door
uldcode = BELT

787-9:

[aircraft]
nosegear = 24.02
refueling = 0
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.01 3.23 0.49
wingtippos = 26.89 -10.32 3.00
fuelpos = -16.94 -2.30 1.50
waterpos = -0.01 -20.02 -1.32
lavatorypos = -0.01 -8.57 -1.91
engine1pos = -9.95 5.58 -1.35
engine2pos = 9.95 5.63 -1.33
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -2.13 23.14 0.58 9.00
code = 1
name = Door L1

[exit2]
pos = -2.60 11.08 0.58 -1.00
code = 2
name = Door L2

[exit3]
remove = 1

[exit4]
pos = -2.39 -19.53 0.64 -8.70
code = 4
name = Door L4

[service1]
pos = 2.46 23.15 0.65 -9.50
code = (L:DoorR1, bool)
name = Door R1

[service2]
pos = 2.80 11.21 0.57 0.10
code = (L:DoorR2, bool)
name = Door R2

[cargo1]
pos = 1.77 18.54 -1.24 -0.80
code = 4
name = Forward Cargo Door
uldcode = AKE

[cargo2]
pos = 1.71 -13.21 -1.24 -0.80
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AKE

[cargomain]
pos = -1.54 -17.63 -1.29 -12.00
code = (L:QW_CargoDoor_Bulk, bool)
name = Bulk Cargo Door
uldcode = BELT

bbugday:
Hi,
I have copied the parameters for 789  and re started gsx. The caatering truck at R1 does not see the door is open. Eventhough the door is open and the catering truck at R2 is doing its duty the truck at R1 does nothing and keeps sending the warning " waiting for your action open R1 "
Also wouldn't it be better if the catering was at R1 and R4?

bbugday:
any one else having this problem?

CrazychrisX1:

--- Quote from: bbugday on April 24, 2018, 10:07:57 am ---any one else having this problem?

--- End quote ---

i have this issue too :/

nordicman:
Sorry to hijack but plus +1, except my issue is with Door L4. I get the beep and warning even though the door is open, i get the warning about opening door L4.

Navigation

[0] Message Index

[#] Next page

[*] Previous page