Products Support > GSX Sharing area - Airplane Configs

QualityWings Boeing 787 Configuration

(1/7) > >>

Captain Kevin:
Although the QualityWings Boeing 787 came with its own configuration, there were several drawbacks with the way it was set up. The first is that it only gave you the option for one passenger boarding door. The second is that although the catering door positions were set up, it wasn't set to check whether the doors were open or not. Here are the configurations that will allow you to use two boarding doors and have the catering door positions checked before the catering trucks do their thing.

787-8:

[aircraft]
nosegear = 20.93
refueling = 1
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.01 3.11 0.25
wingtippos = 25.89 -9.57 2.75
fuelpos = -14.92 -0.94 1.28
waterpos = -0.02 -17.04 -1.31
lavatorypos = -0.01 -8.55 0.00
engine1pos = -9.96 5.60 -1.34
engine2pos = 9.96 5.59 -1.35
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -2.40 19.98 0.67 10.70
code = 1
name = Door L1

[exit2]
pos = -2.75 11.28 0.67 0.70
code = 2
name = Door L2

[exit3]
remove = 1

[exit4]
pos = -2.39 -16.64 0.67 -7.80
code = 4
name = Door L4

[service1]
pos = 2.78 11.25 0.70 0.30
code = (L:DoorR2, bool)
name = Door R2

[service2]
pos = 2.47 -16.62 0.68 11.00
code = (L:DoorR4, bool)
name = Door R4

[cargo1]
pos = 1.72 15.36 -1.24 0.00
code = 4
name = Forward Cargo Door
uldcode = AUTO

[cargo2]
pos = 1.72 -10.38 -1.29 -0.40
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AUTO

787-9:

[aircraft]
nosegear = 24.02
refueling = 0
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.01 3.23 0.49
wingtippos = 26.89 -10.32 3.00
fuelpos = -16.94 -2.30 1.50
waterpos = -0.01 -20.02 -1.32
lavatorypos = -0.01 -8.57 -1.91
engine1pos = -9.95 5.58 -1.35
engine2pos = 9.95 5.63 -1.33
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -2.13 23.14 0.58 9.00
code = 1
name = Door L1

[exit2]
pos = -2.60 11.08 0.58 -1.00
code = 2
name = Door L2

[exit3]
remove = 1

[exit4]
pos = -2.39 -19.53 0.64 -8.70
code = 4
name = Door L4

[service1]
pos = 2.81 11.19 0.65 -0.50
code = (L:DoorR2, bool)
name = Door R2

[service2]
pos = 2.40 -19.55 0.57 10.10
code = (L:DoorR4, bool)
name = Door R4

[cargo1]
pos = 1.77 18.54 -1.24 -0.80
code = 4
name = Forward Cargo Door
uldcode = AUTO

[cargo2]
pos = 1.71 -13.21 -1.24 -0.80
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AUTO

Hope this helps.

crash77:
I copy exactly what you have for the 787-9 but for some reasons I get small little vans that come up for catering.

Captain Kevin:
That's highly unusual. I didn't even touch the door positions for those doors. All I did was change the parameters for the catering trucks checking the doors.

crash77:
It is definitely strange.  By default the catering vehicles are correct as far as the type of trucks but as you stated they don't wait for checks.

mamush:
Ok Kevin,787-8 is ok now,but 787-9 is the same,and also i had a gsx config in the 787-8 but not in the 9(if you know what i mean).So i put one in myself.

Peter

Navigation

[0] Message Index

[#] Next page