Products Support > GSX Sharing area - Airplane Configs
QualityWings Boeing 787 Configuration
Greenfieldje:
Hey guys,
I seem to have the small catering vans problem only with the 787-8. Also, there is no cargo loaders nor stairs. Could you please help me out?
Thanks in advance
CosmicWanderer:
Thanks Kevin! For those having issues, this is what I found works perfectly for me on both the -8 and -9. Kept the 2 boarding doors. But now there are no catering issues where doors are not recognized, no small vans, and no never-ending boarding. Also, I removed the bulk cargo because it was conflicting with the L4 staircase, and I reverted the catering doors to R2 and R4.
787-8
[aircraft]
nosegear = 20.93
refueling = 1
iscargo = 0
trafficcones = 1
wingrootpos = 3.01 3.11 0.25
wingtippos = 25.89 -9.57 2.75
fuelpos = -14.92 -0.94 1.28
waterpos = -0.02 -17.04 -1.31
lavatorypos = -0.01 -8.55 0.00
engine1pos = -9.96 5.60 -1.34
engine2pos = 9.96 5.59 -1.35
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -2.40 19.98 0.67 10.70
code = 1
name = Door L1
[exit2]
pos = -2.75 11.28 0.67 0.70
code = 2
name = Door L2
[exit3]
remove = 1
[exit4]
pos = -2.39 -16.64 0.67 -7.80
code = 4
name = Door L4
[service1]
pos = 2.78 11.25 0.70 0.30
code = (L:DoorR2, bool)
name = Door R2
[service2]
pos = 2.47 -16.62 0.68 11.00
code = (L:DoorR4, bool)
name = Door R4
[cargo1]
pos = 1.72 15.36 -1.24 0.00
code = 4
name = Forward Cargo Door
uldcode = AKE
[cargo2]
pos = 1.72 -10.38 -1.29 -0.40
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AKE
787-9
[aircraft]
nosegear = 24.02
refueling = 0
iscargo = 0
trafficcones = 1
wingrootpos = 3.01 3.23 0.49
wingtippos = 26.89 -10.32 3.00
fuelpos = -16.94 -2.30 1.50
waterpos = -0.01 -20.02 -1.32
lavatorypos = -0.01 -8.57 -1.91
engine1pos = -9.95 5.58 -1.35
engine2pos = 9.95 5.63 -1.33
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -2.13 23.14 0.58 9.00
code = 1
name = Door L1
[exit2]
pos = -2.60 11.08 0.58 -1.00
code = 2
name = Door L2
[exit3]
remove = 1
[exit4]
pos = -2.39 -19.53 0.64 -8.70
code = 4
name = Door L4
[service1]
pos = 2.81 11.19 0.65 -0.50
code = (L:DoorR2, bool)
name = Door R2
[service2]
pos = 2.40 -19.55 0.57 10.10
code = (L:DoorR4, bool)
name = Door R4
[cargo1]
pos = 1.77 18.54 -1.24 -0.80
code = 4
name = Forward Cargo Door
uldcode = AKE
[cargo2]
pos = 1.71 -13.21 -1.24 -0.80
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AKE
tomwolf:
What is the folder name? Thanks
Gpxe:
Guys
All the issues have to do with the change of local variables QW use in their gauge to manage door opening/closing.
Here is my GSX config for 787-900 :
[aircraft]
nosegear = 24.02
refueling = 0
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.01 3.23 0.49
wingtippos = 26.89 -10.32 3.00
fuelpos = -16.94 -2.30 1.50
waterpos = -0.01 -20.02 -1.32
lavatorypos = -0.01 -8.57 -1.91
engine1pos = -9.95 5.58 -1.35
engine2pos = 9.95 5.63 -1.33
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -2.13 23.14 0.58 9.00
code = 1
name = Door L1
[exit2]
pos = -2.60 11.08 0.58 -1.00
code = 2
name = Door L2
[exit3]
remove = 1
[exit4]
pos = -2.39 -19.53 0.64 -8.70
code = (L:DoorL4, bool)
name = Door L4
[service1]
pos = 2.46 23.15 0.65 -9.50
code = 3
name = Door R1
[service2]
pos = 2.81 11.19 0.65 -0.50
code = (L:DoorR2, bool)
name = Door R2
[cargo1]
pos = 1.77 18.54 -1.24 -0.80
code = 4
name = Forward Cargo Door
uldcode = AKE
[cargo2]
pos = 1.71 -13.21 -1.24 -0.80
code = (L:QW_CargoDoor_Aft, enum)
name = Aft Cargo Door
uldcode = AKE
[cargomain]
pos = -1.54 -17.63 -1.29 -12.00
code = (L:QW_CargoDoor_Bulk, bool)
name = Bulk Cargo Door
uldcode = BELT
Please note that the "code =" line is different for every single door.
The gsx.cfg has to be put in the root folder of the aircraft.
Keep in mind that if you change the door configuration with the graphical editor, it will create another gsx.cfg file in the AppData\Roaming\Virtuali\Airplanes folder that will override the one in your root aircraft folder.
Hope this helps/
cirurgiao:
This is my 1st visit here (Virtuali`s tip).
I have P3Dv4.5 & QW787-8 -9. Updated GSX Level 2 to the latest (and huge) update.
EHAM gate F6 everything seems to work (refueling+catering+boarding) until all passengers are boarded. Then GSX keeps warning to close Door 4L although I did it already.
Any idea?
Tks
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version