Products Support > GSX Sharing area - Airplane Configs
QualityWings Boeing 787 Configuration
jalbino59:
--- Quote from: sanookbkk on June 01, 2018, 05:15:40 am ---
--- Quote from: jalbino59 on May 28, 2018, 02:20:03 am ---Just in case it helps anyone here, I used OP's the first configuration but I took a different approach, I copied only the exit and cargo door portions of the config file, and left the [aircraft] section intact from the provided QW gsx config.
Everything is working perfectly for me on both -8 and -9 models. Might be worth a try if anyones still having problems.
The original QW backup gsx configs should still be in the (p3d root)\SimObjects\Airplanes\QualityWings 787-8 and SimObjects\Airplanes\QualityWings 787-9 folders.
--- End quote ---
Jalbino
I am not sure i understand what you mean
I checked the original QW787-8 and 787-9 GSX.cfg and the [aircraft] part is the same than in "Captain Kevin" modified cfg on this thread, so i don't see how keeping the original [aircraft] part will change
anything...
--- End quote ---
I'm not sure if this makes a difference or not, but there is a slight difference in the aircraft section, Capt. K version has a line specifying "preffered exit=0". In the QW supplied version that line does not exist.
I don't know if that's the reason that the rest of the config works flawlessly for me, but that's what I did, and the thing works. Have you tried it?
Captain Kevin:
Here's my first time testing this in P3D V4, Flightbeam KSFO, SODE 1.6.3. Looks like it works fine on my end for both the 787-8 and 787-9.
Captain Kevin:
Here's ImagineSim KATL. Also works fine on my end.
sanookbkk:
Kevin,
I also tested with sode 1.6.3 and P3Dv4.2
The main problem is still there. Door R1 keeps asking to be opened even when it is opened and the service is not done
sanookbkk:
--- Quote from: jalbino59 on June 01, 2018, 10:07:56 pm ---
--- Quote from: sanookbkk on June 01, 2018, 05:15:40 am ---
--- Quote from: jalbino59 on May 28, 2018, 02:20:03 am ---Just in case it helps anyone here, I used OP's the first configuration but I took a different approach, I copied only the exit and cargo door portions of the config file, and left the [aircraft] section intact from the provided QW gsx config.
Everything is working perfectly for me on both -8 and -9 models. Might be worth a try if anyones still having problems.
The original QW backup gsx configs should still be in the (p3d root)\SimObjects\Airplanes\QualityWings 787-8 and SimObjects\Airplanes\QualityWings 787-9 folders.
--- End quote ---
Jalbino
I am not sure i understand what you mean
I checked the original QW787-8 and 787-9 GSX.cfg and the [aircraft] part is the same than in "Captain Kevin" modified cfg on this thread, so i don't see how keeping the original [aircraft] part will change
anything...
--- End quote ---
I'm not sure if this makes a difference or not, but there is a slight difference in the aircraft section, Capt. K version has a line specifying "preffered exit=0". In the QW supplied version that line does not exist.
I don't know if that's the reason that the rest of the config works flawlessly for me, but that's what I did, and the thing works. Have you tried it?
--- End quote ---
I tried it and it does not work.
Anyway this gsx.cfg behave in a strange manner. When i first used KEVIN's cfg the only problem i had was this service R1 asking for opening the door and nothing happened when i opened it.
Went back to original cfg whic worked as it is supposed too.
Then I tried again the exact same Kevin's cfg posted here and now : gate R1 one still does not understand when gate is open but also the bulk cargo loader is not showing and i got small cars instead of loader showing at service doors.
All this with the exact same kevin's cfg that i used before. ??? :o ::)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version