Author Topic: Captain Sim L1011 P3Dv5 Config  (Read 4384 times)

CorbiniansBear

  • Newbie
  • *
  • Posts: 9
Captain Sim L1011 P3Dv5 Config
« on: November 10, 2020, 07:56:20 am »
Use the CS fuel and passenger app, which should then be reflected in the default Vehicle--Fuel and Payload menu. However, while GSX does a good job estimating your passengers from the weight, you'll need to remember your fuel amounts for the four tanks and put them in the default Fuel and Payload window when prompted by the the fuel truck. Don't consider it a "custom" system for GSX.

EDIT: This was done after reading the manual and using the 3D configurator on both the airplane and the stand. Now that I have the custom door calls (doors 1 and 2 for certain) I have a more elegant config and have also moved a catering truck all the way to the back, which makes more sense to me. When I get everything just right, I'll share it. Meanwhile, this two-door model is still lots of fun, especially with the GSX 2 add-on. Copy it and save as gsx.cfg and create this folder: "CS_L-1011-1" under C:\Users\[YOU]\AppData\Roaming\Virtuali\Airplanes\  Then just drop the config file into the folder you created and it will be automagically found. If you happen to already have customized your L1011 through GSX, you'll already have the folder, but you might want to remove the existing config from it to a safe place so you don't overwrite it.

[aircraft]
nosegear = 18.18
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 2.87 -0.76 -0.34
wingtippos = 23.77 -11.25 0.92
fuelpos = 3.00 -7.51 -1.72
waterpos = -0.50 -18.25 -0.94
lavatorypos = 0.00 -18.25 -1.19
gpupos = 1.50 20.49 -1.82
engine1pos = -10.67 0.61 -2.44
engine2pos = 0.00 -12.19 4.88
engine3pos = 10.67 0.61 -2.44
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -2.48 21.90 -0.16 17.00
code = 1
name = Exit 1
embeddedStair = 0

[exit2]
pos = -3.01 7.25 -0.04 -0.00
code = 1
name = Exit 2
embeddedStair = 0

[exit3]
remove = 1

[exit4]
remove = 1

[service1]
pos = 2.61 20.68 -0.16 -6.00
code = 0
embeddedStair = 0

[service2]
pos = 2.99 7.25 -0.29 -0.00
code = 0
embeddedStair = 0

[cargo1]
pos = 1.69 12.75 -2.19 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = AUTO

[cargo2]
pos = 1.69 -10.36 -2.19 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = BELT

[cargomain]
remove = 1

Ramp 21 at Luton, customized. It all went much easier than I feared and looks great. This is a really different and fun airplane once you forget how Boeing did things and wrap your head around the Lockheed way. Look at all those passengers, each with their own personality, boarding on "insane" mode without a graphics hiccup. Court operated a couple of different groovy pastel L1011 liveries out of Luton in the 70's.




« Last Edit: November 11, 2020, 07:19:08 am by CorbiniansBear »

7heAngryVe7eran

  • Jr. Member
  • **
  • Posts: 60
    • TruNorth Air
Re: Captain Sim L1011 P3Dv5 Config
« Reply #1 on: October 14, 2021, 01:15:07 am »
Looks good!

dipperdolphin

  • Newbie
  • *
  • Posts: 4
Re: Captain Sim L1011 P3Dv5 Config
« Reply #2 on: April 04, 2022, 09:58:13 am »
Getting an issue where I get stuck on door 2 opening and no cargo loads- pax do.