FSDreamTeam forum
Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: r22s7 on September 17, 2018, 01:36:08 pm
-
Hi there,
Just wondering if anyone has GSX level 2 configurations they could share for any or all of the following airports:
FSDT Fort Lauderdale KFLL
-
currently working on RPLL
-
currently working on RPLL
I look forward to it :)
Hoping someone has one or more of the others in progress. :)
-
Will do VTBS if i find the time to do so...
-
I tried RJTT, but had issues with the first jetway disappearing. I did two jetways at YSSY.
-
I tried RJTT, but had issues with the first jetway disappearing. I did two jetways at YSSY.
YSSY was the one I was really hoping for, as it is my home airport. :)
-
I tried RJTT, but had issues with the first jetway disappearing. I did two jetways at YSSY.
YSSY was the one I was really hoping for, as it is my home airport. :)
I wouldn't get too excited if I were you. I don't have a whole lot of time available now, and once I go back to work, I won't be able to do anything at all since I won't have access to this computer. Given my line of work, I'll be gone for five weeks before I get out of work. That said, I have a configuration for YSSY back when I was marking the pushback directions, so this should at least be a start.
http://www.fsdreamteam.com/forum/index.php/topic,17945.0.html
-
I tried RJTT, but had issues with the first jetway disappearing. I did two jetways at YSSY.
YSSY was the one I was really hoping for, as it is my home airport. :)
I wouldn't get too excited if I were you. I don't have a whole lot of time available now, and once I go back to work, I won't be able to do anything at all since I won't have access to this computer. Given my line of work, I'll be gone for five weeks before I get out of work. That said, I have a configuration for YSSY back when I was marking the pushback directions, so this should at least be a start.
http://www.fsdreamteam.com/forum/index.php/topic,17945.0.html
That's OK, I was thinking if someone already had it.
What file did you disable to remove the default/static jetways at FT YSSY?
-
I tried RJTT, but had issues with the first jetway disappearing. I did two jetways at YSSY.
YSSY was the one I was really hoping for, as it is my home airport. :)
I wouldn't get too excited if I were you. I don't have a whole lot of time available now, and once I go back to work, I won't be able to do anything at all since I won't have access to this computer. Given my line of work, I'll be gone for five weeks before I get out of work. That said, I have a configuration for YSSY back when I was marking the pushback directions, so this should at least be a start.
http://www.fsdreamteam.com/forum/index.php/topic,17945.0.html
That's OK, I was thinking if someone already had it.
What file did you disable to remove the default/static jetways at FT YSSY?
Looks like there are six files to removed them for the domestic gates. The international terminal appears to be Terminal_Intl_Overhang_details.BGL, but I may have discovered a problem. There's certain jetways at some of the terminals where it looks like the jetways themselves might be fixed position jetways, so I'm not really sure how to handle that one. As of right now, I have only seven jetways done. Some of them were single jetways, so those were easy. For the dual and even triple jetway gates, I have not figured out how to solve that.
-
Looks like there are six files to removed them for the domestic gates. The international terminal appears to be Terminal_Intl_Overhang_details.BGL, but I may have discovered a problem. There's certain jetways at some of the terminals where it looks like the jetways themselves might be fixed position jetways, so I'm not really sure how to handle that one. As of right now, I have only seven jetways done. Some of them were single jetways, so those were easy. For the dual and even triple jetway gates, I have not figured out how to solve that.
Would it be possible to send me the configuration for YSSY that has been done so far? All I really need is a few jetways working. :)
EDIT: Never mind, someone else has uploaded their configuration for YSSY. :)
-
New requests:
FSDT Honolulu
-
Hi,
I now CYUL will be redone, but moving jetways would be a good idea while we wait....
Thank's
Yves
-
Hi
Is RPLL already available?
Kind Regards
Patrick
-
Hi
Is RPLL already available?
Kind Regards
Patrick
Yes, someone else has completed their config for RPLL:
https://drive.google.com/open?id=1jB1DfQ8usBVRF7llcufucjhrX88El6dv&fbclid=IwAR1o_5FCuP7KkFtjoD1XOZd9M9M6Vaq6WRd0vR9_qXK3_ZZGvdvo7usfGus
(Above list will be modified for new requests)
-
Above list will be modified for new requests
List has now been modified
-
RPLL Works Great, thank you! :)
-
ummmm....
How can we correct the floating numbers above the jetways?
(https://lh3.googleusercontent.com/7cp4bGz7rjIjgl2EOW98A9qv5jR_G6BdI_vrkU1q_4Om8mqi1WsTYsc5Dmax1maCheqXrF4JEen9z6PTWTCP2-TMLoME1aS5heQ78KlxT4aMdGdnopxuDwCCuCQEtpWopgh6rYdARKIC-SFEY6Czb7s5Cl5LKzwuTL56z0keFZkz6WTI6Cy2ra0rI2BcJkp1FY5rG3Q0SMb5ytI1yQsLNYffEpMhSletcOrizqC_BokwPMVuqqRjMi4iWoEaE-NLhOB6tQVkVCbbpoVFK614jNMjkm4JlYLwekllMOehLi6JLosBCwYKWHp3tM4LfSfFCvDP22NFluYGqwDMnAwbMWHywnWeDadex5RncRNiC1_1BOyDBjCnwInDQCGm0gvSySPpF7QvopLkXx12urGPmf_JC3tIsSDretjoNIPCw8RFF03H-THFd_JMkY_3r9KbHU-X7cGfz6n5T96BnEfDRmwR3DqaF6LLH6RsNqm0rka4gjf3Ouw1PItCEE5W1-UgngqCyF-8c5AmELmbXBqgaXUDCc3u9lFAF_GkEVrZVQds3F131m_5g3rTHK0d47D8q9HJv_FDCpD56D44uIDqXm_GHFnWl9jD2-X17BYWVG9ccHRUoqOALYHTfd-MxnwRJ2JIUDHdab72085FBgf6cs8P=w875-h327-no)
Thanks for support...
-
Not sure, you would have to ask the person that originally made the RPLL config (not me).
Does anyone have GSX Lvl 2 on Aerosoft EDDT?
-
All right,
No way to contact original author, and no info on the readme...i will just uninstall this one, not really working well. But thanks.... Happy flying...