FSDreamTeam forum
General Category => General Discussion => Topic started by: virtuali on December 19, 2014, 02:28:42 am
-
I'm happy to report that ALL installers from FSDT have been updated to support FSX Steam Edition, both when installed alone, and in combination with an existing FSX installation.
There's no reactivation involved, just re-download all the installers you need from our site.
-
Thanks Virtuali.
-
I cannot use the KFLL installer in FSX. KFLL installer asks for FSX directory, and then says FSX SE needs to be installed. I don't use SE.
-
will we be able to install GSX into steam as well or that still a work in progress
-
I am trying to run the installer for kiah to let the scenery run in steam fsx but its giving me the error install KIAH full installer first which i have about four times and still giving me the error any ideas
-
Sorry, there was a bug in the installers, just download them again if you don't have FSX Steam edition.
-
so do I just rerun the installers to install the airports into steam
-
so do I just rerun the installers to install the airports into steam
Just re-run it's not enough, you must download them again.
-
does this include gsx as well or just the scenery
-
awesome thanks for the help
-
it has installed but everytime i go into the airport it fatal errors ideas?
-
i am having the same problem as well, and only have the steam version installed,errors when i install fsdreamteam airports and flightbeam, then the ones that do install, i go to the airport and the sim freezes and crashes fsx
-
My airports are all gone from FSX, couatl engine is running, reinstall didn't help. Latest Addon Manager installed, says Airport is active but not installed in the Scenery library. And that is the case for all my airports, including Flightbeam's. :(
Edit: Vancouver showed up in FSX,after i installed it into the FSX SE, but FSX SE crashes with bglman error right upon loading CYVR scenery. Haven't tried the rest of the airports though.
-
getting crashes in fsx SE and p3d after the recent update. only at fsdt klas, klax and kiah. flightbeams are fine.
update: after testing with both p3d and fsx se, i have concluded that you cannot run the fsx se versions of fsdt airports alongside p3d versions. The fsx se version without p3d version isntalled doesnt work at all on my machine. ( loads up, then freezes, then crashes ). fsdt airports work fine in P3D without fsx se versions installed.
-
i am still unable to successfully install GSX into FSX:SE
-
Hi Umberto,
I already have JFK V2 installed in FSX. I purchased FSX SE then downloaded the new installer so I could install it in FSX SE. After the install I ran FSX SE and promptly got a CTD. I redownloaded JFK V2 and reinstalled without uinstalling. CTD again. Appcrash info points to bglmax.dll as the module in question. Any thoughts?
-
Fsx boxed version installed originally, downloaded and installed fsx stream. After installing and testing a few addons uninstalled boxed version via fsx uninstaller. When I installed the airports (KJFK, KORD, KLAX) after redownloading from your site your installer found my steam folder automatically and installed without any errors. There is nothing in the Add-ons menu within FSX Steam other than the latest version of FSUPIC I had downloaded.
-
Found the problem, it was a bug in the Addon Manager related to support of legacy FS8 code, which is different (and not needed by most of our sceneries) in the FSX Steam Edition.
You only need to get the updated version of the bglmanx.dll file so, JUST run ANY FSDT installer (Stand-Alone Addon Manager, any scenery, GSX, etc.), no need to redownload anything, just run any one installer, to get the updated .DLL.
Sorry for the problem, it was a very old bit of code that we didn't use for years (it was pre-FSX), but still had to be handled with the new FSX version.
-
Sorry to report, but I'm still having the same issue after a fresh download and installation of Addon Manager. For the heck of it I also downloaded KORD and reinstalled it with no luck.
I then uninstalled all of the airports including ones from another vendor, and only reinstalled KORD with the same results.
Please see pictures below.
http://www.eagledesign.biz/Screen_Shot1.jpg (http://www.eagledesign.biz/Screen_Shot1.jpg)
http://www.eagledesign.biz/Screen_Shot2.jpg (http://www.eagledesign.biz/Screen_Shot2.jpg)
-
Sorry to report, but I'm still having the same issue after a fresh download and installation of Addon Manager. For the heck of it I also downloaded KORD and reinstalled it with no luck.
Your problem doesn't have anything to do with the ones reported here, which was either a problem with the installer recognizing the Steam edition, or a crash when starting at an FSDT airport.
You are reporting missing menus, which can be caused by missing Simconnect libraries in the Steam version, as explained here:
http://www.fsdreamteam.com/forum/index.php/topic,11257.msg86703.html#msg86703
If that still doesn't fix the issue, this thread indicates all the known solutions for missing menu items under the "Addons" menu:
http://www.fsdreamteam.com/forum/index.php/topic,7545.msg62899.html#msg62899
-
Your solution worked! Thank you for your help.
-
That did it!!! including GSX :D
-
would it hurt to redownload all the installers for future installs?
-
would it hurt to redownload all the installers for future installs?
It's best if you do that when you really need to reinstall because, chances are they would be updated again by then.
-
Your solution worked! Thank you for your help.
Which solution worked?
-
I'm happy to report that ALL installers from FSDT have been updated to support FSX Steam Edition, both when installed alone, and in combination with an existing FSX installation.
There's no reactivation involved, just re-download all the installers you need from our site.
I'm going to buy next week your LAX and GSX products. So you're saying that it's going to work on FSX Original and on FSX Steam Edition Right?
That sounds amazing Thank You very much ;D ;)
-
I'm going to buy next week your LAX and GSX products. So you're saying that it's going to work on FSX Original and on FSX Steam Edition Right?
Yes, all our installers have been updated to support FSX, FSX Steam Edition, and FSX and FSX Steam Edition installed together.
-
Hi,
Since I have installed FsDreamteam sceneries and GSX, I always get this message when I start FSX SE :
How to stop the message?
How does this have anything to do with this topic?
-
Each time I start FSX Steam Edition, I have to answer to the question if I want to run couatl.
I hope Vituali could help me.
But why did you post this in some random topic?
Open up a new topic,
-
Hi,
after the last FSX SE update (on 12/01/15 ) addon manager is not working .
cheers
-
after the last FSX SE update (on 12/01/15 ) addon manager is not working .
This was already discussed, answered and solved in a thread in this same forum section, the same day the FSX:SE update was released:
http://www.fsdreamteam.com/forum/index.php/topic,11389.msg87795.html#msg87795
-
everytime i try to install the addon manager in steam, i get an error on line 0 position 0
system cannot find the path specified
-
everytime i try to install the addon manager in steam, i get an error on line 0 position 0
system cannot find the path specified
That's not a problem if the Addon Manager or the installer. That message indicates there's an error in your DLL.XML or EXE.XML file, so the installer will not proceed, because if it tried to change an already corrupted file, it would corrupt it even more and nothing would work anyway.
You should check your XML files for errors, if you cannot fix them, post them here. Their location changes depending if you installed Steam stand-alone, or alongside an existing FSX installation.
-
i only have the steam version of fsx installed. i have posted my exe and dll files.
-
i only have the steam version of fsx installed. i have posted my exe and dll files.
The error is in your DLL.XML, which looks to be hand-edited. You put these lines:
</SimBase.Document>
<Launch.Addon>
<Name>as_connect</Name>
<Disabled>False</Disabled>
<Path>as_srv\as_btstrp.dll</Path>
</Launch.Addon>
After the closing tag </Simbase.Document>, which is of course illegal.
You should move all these lines up, so the last lines will look like this:
<Launch.Addon>
<Name>as_connect</Name>
<Disabled>False</Disabled>
<Path>as_srv\as_btstrp.dll</Path>
</Launch.Addon>
</SimBase.Document>
-
I have both FSX and FSX steam installed. I downloaded the latest fsdt installers and successfully installed the Hawaii airports into FSX steam. A week later when I try to install the rest of my fsdt airports I do not get the option to install to steam, only to FSX. I guess something may have happened after the last steam update or something has changed in the registry. Is there anything I can try to get the fsdt installer to give back the option to install to steam? I tried with all of my fsdt airports and none are now giving the FSX steam install option.
-
I guess something may have happened after the last steam update or something has changed in the registry.
Something has changed in your registry, because there hasn't been any updates on Steam after the one published January 12th.
Is there anything I can try to get the fsdt installer to give back the option to install to steam?
Fixing your registry, of course. You must check your FSX registry keys to be pointing to the correct folders, they are located at:
HKEY_CURRENT_USER\Software\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0 (if FSX:SE is installed together with FSX)
and
HKEY_CURRENT_USER\Software\Microsoft\Microsoft Games\Flight Simulator\10.0 ( if FSX:SE is installed stand-alone )
-
Thank you for your fast response. I discovered that the Setpath for FSX Steam was missing. I imported back my last
regedit backup file, rebooted the computer and presto the Setpath to FSX Steam returned and the FSDT installer now offers the FSX Steam option again and I was able to install KLAX into Steam no problem.
Thanks again.
-
my dll and exe error appear to have returned and the buildings do not appear. (i have done nothing that i can remember)
-
my dll and exe error appear to have returned and the buildings do not appear. (i have done nothing that i can remember)
See the above reply. It's a problem of your registry keys.
-
i get the option to install into steam but its the same error (line 0 position 0 system cannot find the path specified)
in the dll. the addon manager path just said bglmanx.dll so i fixed it to say:
<Path>C:\Program Files (x86)\Steam\SteamApps\common\FSX\bglmanx.dll</Path> (still didnt work)
hear is the dll file (the one in the AppData\Roaming\Microsoft\FSX folder)
<?xml version="1.0" encoding="Windows-1252"?>
<SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>dll.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>False</Launch.ManualLoad>
<Launch.Addon>
<Name>ObjectFlow_KBZN.dll</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>C:\Program Files (x86)\Steam\steamapps\common\FSX\ORBX\FTX_NA\FTX_AA_KBZN\Scenery\ObjectFlow_KBZN.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Addon Manager</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>bglmanx.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>AFXModule</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>C:\Program Files (x86)\AFX\AFXModuleFSX.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Object Placement Tool</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Mission Creation Kit\object_placement.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Traffic Toolbox</Name>
<Disabled>True</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Traffic Toolbox SDK\traffictoolbox.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Visual Effects Tool</Name>
<Disabled>True</Disabled>
<ManualLoad>False</ManualLoad>
<Path>..\Microsoft Flight Simulator X SDK\SDK\Environment Kit\Special Effects SDK\visualfxtool.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>Flight Recorder</Name>
<Disabled>False</Disabled>
<ManualLoad>False</ManualLoad>
<Path>Aerosoft\Flight Recorder\AS-FlightRecorder.dll</Path>
</Launch.Addon>
<Launch.Addon>
<Name>FSUIPC 4</Name>
<Disabled>False</Disabled>
<Path>Modules\FSUIPC4.dll</Path>
</Launch.Addon>
</SimBase.Document>
-
in the dll. the addon manager path just said bglmanx.dll so i fixed it to say:
No need whatsoever to do that. If there's no path, the path FSX is running from is used, which is exactly the same. As I've said in my previous message, the problem is NOT the DLL.XML file, the problem are your registry keys.
Is your FSX:SE installed Stand-Alone or alongside an existing FSX installation ?
-
its installed alongside fsx boxed. but i uninstalled the boxed version after installing the steam edition, and the registry is correct
(HKEY_CURRENT_USER\Software\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0)
-
its installed alongside fsx boxed. but i uninstalled the boxed version after installing the steam edition, and the registry is correct (HKEY_CURRENT_USER\Software\Microsoft\Microsoft Games\Flight Simulator - Steam Edition\10.0)
No, it's NOT!
Normally, when FSX:SE is installed stand-alone without FSX, the correct registry key for it, is HKEY_CURRENT_USER\Software\Microsoft\Microsoft Games\Flight Simulator X\10.0, the same used by FSX.
But if you uninstall FSX *after* you install the Steam edition, the FSX uninstaller won't obviously "fix" your FSX:SE keys, because it doesn't know anything about them. A correct course of action would be Uninstalling and Reinstalling the Steam edition too, so the registry keys would all be like FSX, which is how FSX:SE is when installed on a clean system.
Note that, you could have proceeded with the installation, if you simply replied NO to the 1st request to install into FSX Steam mode, because the installer is smart enough to check the FSX folder then, and check if there's a Steam FSX installed there, so you still have a chance to install into Steam in "Single mode", even after your replied NO to a Steam "Dual Mode" install.
This was already discussed here too:
http://www.fsdreamteam.com/forum/index.php/topic,11322.msg89158.html#msg89158
-
For a dual install is it possible to add the full path to FSDT scenery in the scenery.cfg so that FSDT scenery will load in FSX-SE from its current location in FSX ? This works with most scenery.
-
For a dual install is it possible to add the full path to FSDT scenery in the scenery.cfg so that FSDT scenery will load in FSX-SE from its current location in FSX ? This works with most scenery
Doesn't work with our sceneries, they MUST be under the fsdreamteam folder, under the FSX root they run into. You simply have to install them into Steam too.
-
OK thanks for letting me know, no problem.
-
Hi all,
I have FSX Steam Edition.
Can anyone please provide me with a list of FSDreamTeam Airports that are compatible with FSX Steam Edition?
Thanks so much
Baadal Dhingra
-
Can anyone please provide me with a list of FSDreamTeam Airports that are compatible with FSX Steam Edition?
All of them, which could be quickly confirmed in the "System requirement" paragraph of their own information page on our site.