FSDreamTeam forum
Products Support => GSX Support MSFS => GSX Pro - Aircraft profiles => Topic started by: motishow on September 01, 2022, 08:09:24 pm
-
Anyone can share a good profile for Maddog ?
thanks
-
try - maybe its ok!
one thing i couldn't get ok was the aft service door ... since the truck always come from the wrong direction and was going through the plane - so i deactivate it!
have fun!
[aircraft]
nosegear = 19.16
refueling = 0
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.13 -1.07 -0.36
wingtippos = 14.65 -5.61 -0.30
fuelpos = 6.87 -1.98 -0.85
waterpos = -1.25 -10.50 -0.41
lavatorypos = -1.25 -11.24 -0.67
gpupos = 1.30 23.80 -2.11
bypasspinpos = -0.01 19.18 -1.93
engine1pos = -2.57 -11.61 0.27
engine2pos = 2.58 -11.73 0.27
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.21 16.96 -0.23 1.00
code = 1
name = FWD cabin door
embeddedStair = -1.83 16.98 -0.23 -3.68 16.89 -2.67
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -0.01 -12.74 -0.21 -90.00
code = (L:aft_stair_MD, number) 0 !=
name = Rear Exit (requires Hydraulic Press)
embeddedStair = -0.01 -13.24 -0.21 0.00 -15.60 -2.61
[service1]
pos = 1.59 17.04 -0.48 -1.00
code = 2
name = FWD galley door
embeddedStair = 0
[service2]
remove = 1
[cargo1]
pos = 0.51 11.85 -1.47 2.00
code = 3
name = FWD cargo door
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 0.52 -7.95 -1.43 4.00
code = 4
name = AFT cargo door
embeddedStair = 0
uldcode = AUTO
[cargomain]
pos = 0.69 5.05 -1.49 0.00
code = 1
name = FWD galley door
embeddedStair = 0
uldcode = AUTO
-
The latest firmware update from MadDog has built in option for GSX. it works great!
-
No it doesnt.
The rear stairs are bvroken. As soon as I hit the live updater it breaks the profile again and the passengers boarding throgh the rear are launched up in the air and stay there.
I wonder why the heck noone fixes this. There are numerous profiles around that work perfectly fine.
It is extremely annoying to constantly replace the profile manually becaus the actual installer breaks it over and over again...
-
try - maybe its ok!
one thing i couldn't get ok was the aft service door ... since the truck always come from the wrong direction and was going through the plane - so i deactivate it!
have fun!
[aircraft]
nosegear = 19.16
refueling = 0
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.13 -1.07 -0.36
wingtippos = 14.65 -5.61 -0.30
fuelpos = 6.87 -1.98 -0.85
waterpos = -1.25 -10.50 -0.41
lavatorypos = -1.25 -11.24 -0.67
gpupos = 1.30 23.80 -2.11
bypasspinpos = -0.01 19.18 -1.93
engine1pos = -2.57 -11.61 0.27
engine2pos = 2.58 -11.73 0.27
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.21 16.96 -0.23 1.00
code = 1
name = FWD cabin door
embeddedStair = -1.83 16.98 -0.23 -3.68 16.89 -2.67
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -0.01 -12.74 -0.21 -90.00
code = (L:aft_stair_MD, number) 0 !=
name = Rear Exit (requires Hydraulic Press)
embeddedStair = -0.01 -13.24 -0.21 0.00 -15.60 -2.61
[service1]
pos = 1.59 17.04 -0.48 -1.00
code = 2
name = FWD galley door
embeddedStair = 0
[service2]
remove = 1
[cargo1]
pos = 0.51 11.85 -1.47 2.00
code = 3
name = FWD cargo door
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 0.52 -7.95 -1.43 4.00
code = 4
name = AFT cargo door
embeddedStair = 0
uldcode = AUTO
[cargomain]
pos = 0.69 5.05 -1.49 0.00
code = 1
name = FWD galley door
embeddedStair = 0
uldcode = AUTO
Thanks! The one thing I find is the baggage loaders not opening the cargo doors. They load with doors closed
-
try - maybe its ok!
one thing i couldn't get ok was the aft service door ... since the truck always come from the wrong direction and was going through the plane - so i deactivate it!
have fun!
[aircraft]
nosegear = 19.16
refueling = 0
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 3.13 -1.07 -0.36
wingtippos = 14.65 -5.61 -0.30
fuelpos = 6.87 -1.98 -0.85
waterpos = -1.25 -10.50 -0.41
lavatorypos = -1.25 -11.24 -0.67
gpupos = 1.30 23.80 -2.11
bypasspinpos = -0.01 19.18 -1.93
engine1pos = -2.57 -11.61 0.27
engine2pos = 2.58 -11.73 0.27
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.21 16.96 -0.23 1.00
code = 1
name = FWD cabin door
embeddedStair = -1.83 16.98 -0.23 -3.68 16.89 -2.67
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -0.01 -12.74 -0.21 -90.00
code = (L:aft_stair_MD, number) 0 !=
name = Rear Exit (requires Hydraulic Press)
embeddedStair = -0.01 -13.24 -0.21 0.00 -15.60 -2.61
[service1]
pos = 1.59 17.04 -0.48 -1.00
code = 2
name = FWD galley door
embeddedStair = 0
[service2]
remove = 1
[cargo1]
pos = 0.51 11.85 -1.47 2.00
code = 3
name = FWD cargo door
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 0.52 -7.95 -1.43 4.00
code = 4
name = AFT cargo door
embeddedStair = 0
uldcode = AUTO
[cargomain]
pos = 0.69 5.05 -1.49 0.00
code = 1
name = FWD galley door
embeddedStair = 0
uldcode = AUTO
Thanks! The one thing I find is the baggage loaders not opening the cargo doors. They load with doors closed
For your previous query about the aft service door - one, is it really a service door? I thought it was just an emergency exit. and two, it's rotated the wrong way. Open the gsx aircraft editor, select that door and hit F8 a few times until it is in the right direction. You want the bottom pad facing away from the door - not in the fuselage.
-
I found a strange issue with the Md83/Md88 expansions. When pushing back one of those two aircraft, the pushback person goes to the middle of the aircraft (wing root) to connect the bypass pin... Other than that, it all works fine but is that one thing that is off. Any ideas as to why that happens?.
-
I found a strange issue with the Md83/Md88 expansions. When pushing back one of those two aircraft, the pushback person goes to the middle of the aircraft (wing root) to connect the bypass pin... Other than that, it all works fine but is that one thing that is off. Any ideas as to why that happens?.
MD-83 and MD-88 don't have internal gsx profiles iirc, therefore you'll have to find a profile or manually customize pin location for it to not just be autoset to the middle of the aircraft (wing root).