FSDreamTeam forum
Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: headley on December 19, 2018, 09:10:55 pm
-
Hello,
After installing the Cartayna-files for EGKK, i still have double jetways on all gates.
(https://farm5.staticflickr.com/4910/31445808787_76e61bb41c_b.jpg)
I have followed the instructions to the letter, BUT only one file i could not find:
From the instruction pdf: > Also in the scenery folder turn .off 2 files: EGKK_JetwayPlace1.BGL ->.OFF <
I don't have this file, at least not in the scenery-folder. I'm not sure if this file is the cullprit?
What is the file "EGKK_JetwayPlace1.BGL" suppose to do?
If my explanation is not complete, feel free to ask more info :)
-
Hello,
After installing the Cartayna-files for EGKK, i still have double jetways on all gates.
(https://farm5.staticflickr.com/4910/31445808787_76e61bb41c_b.jpg)
I have followed the instructions to the letter, BUT only one file i could not find:
From the instruction pdf: > Also in the scenery folder turn .off 2 files: EGKK_JetwayPlace1.BGL ->.OFF <
I don't have this file, at least not in the scenery-folder. I'm not sure if this file is the cullprit?
What is the file "EGKK_JetwayPlace1.BGL" suppose to do?
If my explanation is not complete, feel free to ask more info :)
Hello William,
Thanks for reporting this,.. I am afraid i have made a mistake when the last update of EGKK was brought, i erased a line of the instructions that apparently was not needed any more with the update, and now we see, it is.. sorry for this inconvenience.
Bear with me till tomorrow morning since is very late for me. I will reainstall from scracth following the 4.1 version and my instructions, and detect the error so i can tell you and republish instructions..
Cheers.
Javier
Cartayna Files
-
Thank you Javier :)
Did someone told you allready that you do a great job by sharing your files ;)
Will wait and see the update coming...
-
Thank you Javier :)
Did someone told you allready that you do a great job by sharing your files ;)
Will wait and see the update coming...
hello my friend! hahaha a few times they have indeed.. and happy that it is useful for so many..
at least that is what it seems since 1200 reads a week say so.. but to be honest, dont get the sense of it.. i just imagine that is useful.. happy that you like it.
Listen, i did not want to go to bed with out trying egkk from scratch.. check that you have done the renaming of the 3 files, 1 in sode, 2 in the scenery to .off.
sode>xml>UK2000 Gatwick Xtreme.off and in the scenery folder: EGKK_JetwayPlace1.off.EGKK_Main_9.OFF & Egkk_LibJetways.off i tried it and it works. updated instructions of the last file that it was magically gone from it! lol i here attach copy of them
sorry did not do it this morning.. crazy crazy day.
Please let me know if you need further help. By mi pic is my email
-
OK, finally sorted things out, but it took me a lot of restarts, reinstalls and headache :)
What went wrong in my setup? => as mentioned in the instructions i have copied the "EGKK_AFX_UK2xTRM.bgl" from [Options] to [Scenery], but that was no good idea.
Finally i found there is in folder [...]\Options\NoJetways\ also a file called "EGKK_AFX_UK2xTRM.bgl".
When copiing this file all was fine :D.
So it is a matter of choosing the right file under the right sub-folder.
Still have another issue but for that i will make a new topic: http://www.fsdreamteam.com/forum/index.php/topic,20037.0.html
-
OK, finally sorted things out, but it took me a lot of restarts, reinstalls and headache :)
What went wrong in my setup? => as mentioned in the instructions i have copied the "EGKK_AFX_UK2xTRM.bgl" from [Options] to [Scenery], but that was no good idea.
Finally i found there is in folder [...]\Options\NoJetways\ also a file called "EGKK_AFX_UK2xTRM.bgl".
When copiing this file all was fine :D.
So it is a matter of choosing the right file under the right sub-folder.
Still have another issue but for that i will make a new topic: http://www.fsdreamteam.com/forum/index.php/topic,20037.0.html
That is very odd, since that is the afcad i used and get it from options.. in any case, i am happy to hear is working!
merry christmas
-
Hello Javier
appreciate your good work.
Installed files for EGKK as per the instructions. However, for gates 49 to 52, the jetways passages are not complete as seen in the attachments. Is it just for me or else?
thanks
-
Hello Javier
appreciate your good work.
Installed files for EGKK as per the instructions. However, for gates 49 to 52, the jetways passages are not complete as seen in the attachments. Is it just for me or else?
thanks
swear to god not me.
which version of gatwick are you using?
-
Hi
EGKK version 4.10.
problem just for them gates , the others gates are OK.
-
Hi
EGKK version 4.10.
problem just for them gates , the others gates are OK.
let me check to what file of the scnery corresponds that area so we can have a clue of what is going on..
Do you have Orbx Vectors?
-
Hi
Yes, I use orbx vector
-
Hi
Yes, I use orbx vector
then a silly question.. excluded?
-
Hi
Yes excluded as
000_EGKK_GSX_JWEXCL
-
Hi
Yes excluded as
000_EGKK_GSX_JWEXCL
no, i mean if you excluded EGKK in Vectors.. i have seen crazy things happen with vectors,
this is what i have...
Listen, I am heading to EDDF to do an EDDF-LIRF with some other controllers...
I will look into the scnery files to see what file might you have wrong.
-
Hi
Yes excluded in ORBX vector.
Thanks
-
Hi
There are :
EGKK_Libjetways.BGL and EGKK_Library_FSX
In the instruction you mentioned to rename EGKK_Library_FSX to OFF
in your FSDT post , you mention to rename EGKK_libJetways.BGL to OFF.
DO we need to rename both ?
I have renamed both so may be this is the problem. I will try to rename the _fsx one, and start P3d.
-
Hi
There are :
EGKK_Libjetways.BGL and EGKK_Library_FSX
In the instruction you mentioned to rename EGKK_Library_FSX to OFF
in your FSDT post , you mention to rename EGKK_libJetways.BGL to OFF.
DO we need to rename both ?
I have renamed both so may be this is the problem. I will try to rename the _fsx one, and start P3d.
yes, do both.. this has been a headache, since i did the configuration 15 days before the 4.10 update. this caused a bit of confuison. .... you dont need both.. so better be safe than sorry.
-
Thank you Javier :)
Did someone told you allready that you do a great job by sharing your files ;)
Will wait and see the update coming...
hello my friend! hahaha a few times they have indeed.. and happy that it is useful for so many..
at least that is what it seems since 1200 reads a week say so.. but to be honest, dont get the sense of it.. i just imagine that is useful.. happy that you like it.
Listen, i did not want to go to bed with out trying egkk from scratch.. check that you have done the renaming of the 3 files, 1 in sode, 2 in the scenery to .off.
sode>xml>UK2000 Gatwick Xtreme.off and in the scenery folder: EGKK_JetwayPlace1.off.EGKK_Main_9.OFF & Egkk_LibJetways.off i tried it and it works. updated instructions of the last file that it was magically gone from it! lol i here attach copy of them
sorry did not do it this morning.. crazy crazy day.
Please let me know if you need further help. By mi pic is my email
I also placed it here so you wouldnt m¡ss it.. LOL.
-
Hi
1- removed/reinstalled EGKK then run P3dV4.4 without Cartayna GSX2 files, tower gates were there.
2- Run P3dv4.4 and EGKK with Cartayna files but renamed only EGKK_LibJetways to OFF, Tower structure at gates were there.
for some reasons, there was no EGKK_JetwayPlace1.BGL file in the EGKK scenery after clean reinstall.
-
That is so so strange! well glad to see that it works, even if I dont know how! LOL
enjoy it!
Cheers.
-
for some reasons, there was no EGKK_JetwayPlace1.BGL file in the EGKK scenery after clean reinstall.
I had no such file in my system aswell.
-
for some reasons, there was no EGKK_JetwayPlace1.BGL file in the EGKK scenery after clean reinstall.
I had no such file in my system aswell.
i bet you is that file belongs to update 4.02 of EGKK, did you install 4.0 and then 4.10 directly? is very very possible that file is in the 4.02.
This is something that scares the sh.. out of me, upgrades of sceneries.. and keeping up with them
-
Hi
for me, I reinstalled 4.0 then 4.10. So that
File must have been with version 4.02 as you said.
Thanks for your help
-
Hi
for me, I reinstalled 4.0 then 4.10. So that
File must have been with version 4.02 as you said.
Thanks for your help
perfect.... glad to hear.
-
mhhh, sorry to be a game breaker, but i had the original version, then upgraded to 4.02 and only sinds last week upgraded to 4.10, on top of 4.02.
Could not find that file, i have checked all my folders on my system, not only [scenery], although the file should be in [Scenery].
The reinstall was from 4.0 to 4.10, and no such file either ???
-
mhhh, sorry to be a game breaker, but i had the original version, then upgraded to 4.02 and only sinds last week upgraded to 4.10, on top of 4.02.
Could not find that file, i have checked all my folders on my system, not only [scenery], although the file should be in [Scenery].
The reinstall was from 4.0 to 4.10, and no such file either ???
Well you must have one of those green little man that hide in the pc's eating your files! LOL..
To test my configuration when you reported the error, I deleted all uk2000 egkk folder.. and install from scratch.. and it was there, but dont worry, it works? then you are all set.
But in any case, having or not having that file, should have never rendered that error that i saw in the pictures. That was odd. Again, it works? dont you worry then.
Have a great and Merry Christmas Headley!!