Author Topic: Missing Building and Terminals at LSGG and LSZH SOLVED (Read 30834 times)

msharwood · « **Reply #30 on:** August 14, 2014, 06:58:13 pm »

OK, so to answer your message about GSX, I have not manually added additional files to the GSX folder.

What I have now done:

I uninstalled GSX, and before reinstalling it, removed the whole FSX\fsdreamteam\Couatl folder, as you suggested, then I reinstalled GSX , using gsx_fsx_setup. Now is that what you meant by "ONLY the CURRENT GSX full installer"?

I did not add anything else.

My current status is as follows:
1. I still have to start couatl.exe outside FSX to make the airports work properly. Maybe my err. file sent earlier showed something?
2. I still have only the airport options when I select Ctrl F12. Nowhere am I given a choice between controlling Zurich (or Geneva) that or running GSX.

Incidentally, to end on a positive note, I really love your two airports now I have them fully installed and working.

msharwood · « **Reply #31 on:** August 14, 2014, 07:54:25 pm »

While waiting for your reply to my last message, I began to think that the #full installer' was the separate addon manager available form your website so I repeated your instructions but this time used this addon manager.

Looking at a message to another user I also tried installing GSX and creating a install log file. Is this useful?

Checking FSX now I see that I at last have the choice you mentioned when pressing Ctrl F12!

But I still have to run couatl outside FSX to make 'Couatl-powered products' appear in the pull down menu

virtuali · « **Reply #32 on:** August 14, 2014, 10:03:44 pm »

Quote from: msharwood on August 14, 2014, 04:36:37 pm

I must apologise for the previous post. I see not all of err file got posted for some reason.

That's because I've edited it to remove irrelevant errors you had in 2013, and left only the important line, containing the error you had now.

msharwood · « **Reply #33 on:** August 15, 2014, 11:38:32 am »

Oh

I see so it's just 'problem raised by engine or unspecified addonBglmanx disconnected prematurely'. What should I do about this?
M.

virtuali · « **Reply #34 on:** August 15, 2014, 01:41:40 pm »

Now that you have the Couatl menu, do you have the GSX menus under it ?

msharwood · « **Reply #35 on:** August 15, 2014, 03:15:21 pm »

Yes, I do. I have three options with Gsx below 'Key 'Mappings

virtuali · « **Reply #36 on:** August 15, 2014, 06:00:58 pm »

Quote from: msharwood on August 15, 2014, 03:15:21 pm

Yes, I do. I have three options with Gsx below 'Key 'Mappings

Ok, now try to enable Logging in the "Troubleshooting" page, then exit from FSX and enter again, then go to an FSDT airport and launch Couatl.exe if it hasn't started automatically, then exit again.

Check your %APPDATA%\Virtuali\ folder for a Couatl.LOG and a Couatl.ERR file ( the .ERR file might be present or not, but the .LOG must be there ) and post them both.

msharwood · « **Reply #37 on:** August 15, 2014, 07:03:44 pm »

OK. The log was already enabled so this is what I got:

ERR file:

couatl v2.0 (build 2348)
panic log started on Fri May 10 22:37:20 2013
Traceback (most recent call last):
File "couatl\common\fsm.py", line 61, in switchToState
File "couatl\GSX\assistanceServices\baggageLoader.py", line 145, in enter
AttributeError: 'NoneType' object has no attribute 'latLon'

couatl v2.0 (build 2348)
panic log started on Fri May 10 22:47:44 2013
Traceback (most recent call last):
File "couatl\common\fsm.py", line 61, in switchToState
File "couatl\GSX\assistanceServices\baggageLoader.py", line 145, in enter
AttributeError: 'NoneType' object has no attribute 'latLon'

couatl v2.0 (build 2348)
panic log started on Fri May 10 22:56:45 2013
Traceback (most recent call last):
File "couatl\common\fsm.py", line 61, in switchToState
File "couatl\GSX\assistanceServices\baggageLoader.py", line 145, in enter
AttributeError: 'NoneType' object has no attribute 'latLon'

couatl v2.0 (build 2356)
panic log started on Sun Jan 26 22:43:21 2014

problem raised by addon <unknown>Traceback (most recent call last):
File "couatl\common\fsm.py", line 61, in switchToState
File "couatl\GSX\assistanceServices\baggageLoader.py", line 171, in enter
AttributeError: 'NoneType' object has no attribute 'latLon'

couatl v2.0 (build 2364)
panic log started on Wed Aug 13 14:12:04 2014

problem raised by engine or unspecified addonBglmanx disconnected prematurely

couatl v2.0 (build 2364)
panic log started on Thu Aug 14 15:51:20 2014

problem raised by engine or unspecified addonBglmanx disconnected prematurely

And the log:
couatl v2.0 (build 2364)
log started on Fri Aug 15 17:56:52 2014

connecting to SimConnect...
connected to FSX
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 22 AddOn(s)
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon OHareX
Addon OHareX not installed or missing one or more files, skipping
Loading addon KDFW
Addon KDFW not installed or missing one or more files, skipping
Loading addon LSGG
Addon LSGG loaded
Loading addon GSX
Initializing audio...
Available devices:
Generic Software on Headphones (High Definition Audio Device) (47656e6572696320536f667477617265206f6e204865616470686f6e657320284869676820446566696e6974696f6e20417564696f2044657669636529)
Generic Software on Digital Audio (S/PDIF) (High Definition Audio Device) (47656e6572696320536f667477617265206f6e204469676974616c20417564696f2028532f504449462920284869676820446566696e6974696f6e20417564696f2044657669636529)
Generic Software on Speakers (3- USB PnP Audio Device) (47656e6572696320536f667477617265206f6e20537065616b6572732028332d2055534220506e5020417564696f2044657669636529)
Created OpenAL device: Generic Software on Headphones (High Definition Audio Device)

Device info:
   Major version: 1
   Minor version: 1
   Frequency: 44100
   Refresh: 40
   Sync: 0
   Mono sources: 255
   Stereo sources: 1
   Extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_EFX

Context info:
   Vendor: Creative Labs Inc.
   Version: 1.1
   Renderer: Software
   Extensions: EAX EAX2.0 EAX3.0 EAX4.0 EAX5.0 EAX3.0EMULATED EAX4.0EMULATED AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE

Using EFX 1.0 extension, with 1 auxiliary send(s)
Using EAX reverb
Current sim directory is C:/Microsoft Flight Simulator X/fsdreamteam/couatl
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
using Scenery/BASE/scenery (layer 1)
using Scenery/0000/scenery (layer 2)
using Scenery/0001/scenery (layer 3)
using Scenery/0002/scenery (layer 4)
using Scenery/0003/scenery (layer 5)
using Scenery/0004/scenery (layer 6)
using Scenery/0005/scenery (layer 7)
using Scenery/0006/scenery (layer

using Scenery/0007/scenery (layer 9)
using Scenery/0100/scenery (layer 10)
using Scenery/0101/scenery (layer 11)
using Scenery/0102/scenery (layer 12)
using Scenery/0103/scenery (layer 13)
using Scenery/0104/scenery (layer 14)
using Scenery/0105/scenery (layer 15)
using Scenery/0106/scenery (layer 16)
using Scenery/0107/scenery (layer 17)
using Scenery/0200/scenery (layer 18)
using Scenery/0201/scenery (layer 19)
using Scenery/0202/scenery (layer 20)
using Scenery/0203/scenery (layer 21)
using Scenery/0204/scenery (layer 22)
using Scenery/0205/scenery (layer 23)
using Scenery/0206/scenery (layer 24)
using Scenery/0207/scenery (layer 25)
using Scenery/0300/scenery (layer 26)
using Scenery/0301/scenery (layer 27)
using Scenery/0302/scenery (layer 28)
using Scenery/0303/scenery (layer 29)
using Scenery/0304/scenery (layer 30)
using Scenery/0305/scenery (layer 31)
using Scenery/0306/scenery (layer 32)
using Scenery/0307/scenery (layer 33)
using Scenery/0400/scenery (layer 34)
using Scenery/0401/scenery (layer 35)
using Scenery/0402/scenery (layer 36)
using Scenery/0403/scenery (layer 37)
using Scenery/0404/scenery (layer 38)
using Scenery/0405/scenery (layer 39)
using Scenery/0406/scenery (layer 40)
using Scenery/0407/scenery (layer 41)
using Scenery/0500/scenery (layer 42)
using Scenery/0501/scenery (layer 43)
using Scenery/0502/scenery (layer 44)
using Scenery/0503/scenery (layer 45)
using Scenery/0504/scenery (layer 46)
using Scenery/0505/scenery (layer 47)
using Scenery/0506/scenery (layer 48)
using Scenery/0507/scenery (layer 49)
using Scenery/0600/scenery (layer 50)
using Scenery/0601/scenery (layer 51)
using Scenery/0602/scenery (layer 52)
using Scenery/0603/scenery (layer 53)
using Scenery/0604/scenery (layer 54)
using Scenery/0605/scenery (layer 55)
using Scenery/0606/scenery (layer 56)
using Scenery/0607/scenery (layer 57)
using Scenery/0700/scenery (layer 58)
using Scenery/0701/scenery (layer 59)
using Scenery/0702/scenery (layer 60)
using Scenery/0703/scenery (layer 61)
using Scenery/0704/scenery (layer 62)
using Scenery/0705/scenery (layer 63)
using Scenery/0706/scenery (layer 64)
using Scenery/0707/scenery (layer 65)
using Scenery/0800/scenery (layer 66)
using Scenery/0801/scenery (layer 67)
using Scenery/0802/scenery (layer 68)
using Scenery/0803/scenery (layer 69)
using Scenery/0804/scenery (layer 70)
using Scenery/0805/scenery (layer 71)
using Scenery/0806/scenery (layer 72)
using Scenery/0807/scenery (layer 73)
using Scenery/0900/scenery (layer 74)
using Scenery/0901/scenery (layer 75)
using Scenery/0902/scenery (layer 76)
using Scenery/0903/scenery (layer 77)
using Scenery/0904/scenery (layer 78)
using Scenery/0905/scenery (layer 79)
using Scenery/0906/scenery (layer 80)
using Scenery/0907/scenery (layer 81)
using Scenery/1000/scenery (layer 82)
using Scenery/1001/scenery (layer 83)
using Scenery/1002/scenery (layer 84)
using Scenery/1003/scenery (layer 85)
using Scenery/1004/scenery (layer 86)
using Scenery/1005/scenery (layer 87)
using Scenery/1006/scenery (layer 88)
using Scenery/1007/scenery (layer 89)
using Scenery/1100/scenery (layer 90)
using Scenery/1101/scenery (layer 91)
using Scenery/1102/scenery (layer 92)
using Scenery/1103/scenery (layer 93)
using Scenery/1104/scenery (layer 94)
using Scenery/1105/scenery (layer 95)
using Scenery/1106/scenery (layer 96)
using Scenery/1107/scenery (layer 97)
using Scenery/AFRI/scenery (layer 98)
using Scenery/ASIA/scenery (layer 99)
using Scenery/AUST/scenery (layer 100)
using Scenery/EURE/scenery (layer 101)
using Scenery/EURW/scenery (layer 102)
using Scenery/NAMC/scenery (layer 103)
using Scenery/NAME/scenery (layer 104)
using Scenery/NAMW/scenery (layer 105)
using Scenery/OCEN/scenery (layer 106)
using Scenery/SAME/scenery (layer 107)
using Scenery/Cities/Oshkosh/scenery (layer 108)
using Scenery/Cities/StMaarten/scenery (layer 109)
using Scenery/Cities/Rio/scenery (layer 110)
using Scenery/Cities/LasVegas/scenery (layer 111)
using Scenery/Global/scenery (layer 112)
using Scenery/Props/scenery (layer 113)
using Scenery/Cities/Reno/scenery (layer 114)
using Scenery/Cities/Istanbul/scenery (layer 115)
using Scenery/Cities/Longleat/scenery (layer 116)
using Scenery/Cities/Berlin/scenery (layer 117)
using Scenery/Cities/Edwards_AFB/scenery (layer 118)
using Addon Scenery/scenery (layer 119)
using G:/Addon scenery/MEGASCENERY Netherlands/Netherlands/scenery (layer 123)
using G:/Addon scenery/MEGASCENERY Netherlands/scenery (layer 121)
using Scenery/World/scenery (layer 124)
using ../Microsoft Flight Simulator X/Addon Scenery/Catalonia/scenery (layer 125)
using Aerosoft/Mega Airport Barcelona X/scenery (layer 131)
using Aerosoft/Mega Airport Frankfurt/scenery (layer 132)
using Aerosoft/Mega Airport Frankfurt_LC/scenery (layer 133)
using Aerosoft/USCitiesX-SanFrancisco/scenery (layer 130)
using ../Microsoft Flight Simulator X/Addon Scenery/FlightAlpesSudBP/scenery (layer 126)
using ../Microsoft Flight Simulator X/Addon Scenery/FlightRivieraBP/scenery (layer 128)
using ../Microsoft Flight Simulator X/Addon Scenery/FlightAlpesNordBP/scenery (layer 127)
using ../Microsoft Flight Simulator X/Addon Scenery/Riviera JetSet/scenery (layer 129)
using Aerosoft/Nice Cote dAzur X/scenery (layer 134)
using ../Microsoft Flight Simulator X/Aerosoft/EGLC Airport/scenery (layer 135)
using ../Microsoft Flight Simulator X/Addon Scenery/Gran Canaria/scenery (layer 136)
using ../Microsoft Flight Simulator X/Addon Scenery/TenerifeSouthX/scenery (layer 137)
using ../Program Files (x86)/Playsims/FSX/VFR-Gen-X-2.0/Volume5/PhotoTerrain/scenery (layer 153)
using ../Program Files (x86)/Playsims/FSX/VFR-Gen-X-2.0/Volume5/Night/scenery (layer 154)
using ../Program Files (x86)/Playsims/VFRGenX/Volume7/05mPhoto/scenery (layer 155)
using ../Program Files (x86)/Playsims/VFRGenX/Volume7/Airports/scenery (layer 156)
using ../Program Files (x86)/Playsims/VFRGenX/Volume7/Vectors/scenery (layer 157)
using ../Program Files (x86)/Playsims/FSX/VFR-Gen-X-2.0/VFRAirfieldsScotlandVol2/Main/scenery (layer 186)
using ../Program Files (x86)/Playsims/FSX/VFR-Gen-X-2.0/VFRAirfieldsScotlandVol1/ScotflightLibraries/scenery (layer 184)
using ../Program Files (x86)/Playsims/VFRGenX/Volume8/05mPhoto/scenery (layer 158)
using ../Program Files (x86)/Playsims/VFRGenX/Volume8/5mDTM/scenery (layer 159)
using ../Program Files (x86)/Playsims/VFRGenX/Volume8/Airports/scenery (layer 160)
using ../Program Files (x86)/Playsims/VFRGenX/Volume8/Vectors/scenery (layer 161)
using G:/Addon scenery/MEGASCENERY Switzerland/Switzerland/scenery (layer 120)
using G:/Addon scenery/MEGASCENERY Belgium/scenery (layer 122)
using FsDreamTeam/LSGG/scenery (layer 162)
using FsDreamTeam/ZurichX/scenery (layer 163)
using G:/Addon scenery/Warsaw City 2013 X/scenery (layer 165)
using G:/Addon scenery/VFRPoland/scenery (layer 164)
using Addon Scenery/POLAND/mkepwa2010X/scenery (layer 166)
using Addon Scenery/POLAND/EPNT_X/scenery (layer 168)
using Addon Scenery/POLAND/VFR Balice EPKK ext II V2/scenery (layer 169)
using G:/Addon scenery/EPPO_X/scenery (layer 170)
using G:/Addon scenery/EPBY_X/scenery (layer 171)
using G:/Addon scenery/EPWR_X/scenery (layer 172)
using Addon Scenery/Edinburgh X/scenery (layer 185)
using Addon Scenery/United Kingdom/East Sussex addons/scenery (layer 173)
using Flight One Software/BN-2 Islander scenery/scenery (layer 174)
using Aerosoft/Amsterdam Schiphol X/scenery (layer 175)
using Aerosoft/Iceland X/Iceland X - priority 2/scenery (layer 176)
using Aerosoft/Iceland X/Iceland X - priority 1/scenery (layer 177)
using Aerosoft/German Airfields 7/scenery (layer 178)
using C:/Program Files (x86)/Earth Simulations/ES-Vol-6-1/ES-6-1-TFX/scenery (layer 179)
using C:/Program Files (x86)/Earth Simulations/ES-Vol-6-1/ES-6-1-3D/scenery (layer 180)
using C:/Program Files (x86)/Earth Simulations/ES-SFX/scenery (layer 181)
using C:/Program Files (x86)/Earth Simulations/ES-3D/scenery (layer 182)
using ../Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume4/0.6m Night/scenery (layer 150)
using ../Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume4/0.6m Photo/scenery (layer 151)
using ../Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume4/4.8m Mesh/scenery (layer 149)
using ../Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume4/Airports/scenery (layer 152)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area1/2.4m Photo/scenery (layer 138)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area1/4.8m Mesh/scenery (layer 139)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area1/1.2m Photo/scenery (layer 140)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area2/2.4m Photo/scenery (layer 141)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area2/4.8m Mesh/scenery (layer 142)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area2/1.2m Photo/scenery (layer 143)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area2/2.4m Night/scenery (layer 144)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area3/2.4m Photo/scenery (layer 146)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area3/4.8m Mesh/scenery (layer 148)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area3/1.2m Photo/scenery (layer 147)
using C:/Program Files (x86)/Horizon Simulation/VFR-Gen-X-2.0/Volume1/Area3/2.4m Night/scenery (layer 145)
using Addon Scenery/scotland/scenery (layer 183)
Airport cache loaded
Addon GSX loaded
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon PHNL
Addon PHNL not installed or missing one or more files, skipping
Loading addon JFK
Addon JFK not installed or missing one or more files, skipping
Loading addon JFK2
Addon JFK2 not installed or missing one or more files, skipping
Loading addon KFLL
Addon KFLL not installed or missing one or more files, skipping
Loading addon KIAH
Addon KIAH not installed or missing one or more files, skipping
Loading addon KLAS
Addon KLAS not installed or missing one or more files, skipping
Loading addon KLAX
Addon KLAX not installed or missing one or more files, skipping
Loading addon ParkMe
Addon ParkMe not installed or missing one or more files, skipping
Loading addon CYVR
Addon CYVR not installed or missing one or more files, skipping
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon ZurichX
Addon ZurichX loaded
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
Loading addon KPHX
Addon KPHX not installed or missing one or more files, skipping
Loading addon KIAD
Addon KIAD loaded
Loading addon KDEN
Addon KDEN not installed or missing one or more files, skipping
Starting system monitors
Current locale is English_United Kingdom.1252
SharedMemInterface connected
Loading aircraft data from Airplanes\SMS-MD-11
Using aircraft data from SimConnect
Found gsx.cfg file at C:\Users\User\AppData\Roaming\Virtuali\Airplanes\SMS-MD-11\gsx.cfg
Loading airport LSZH from C:/MICROS~1/FsDreamTeam/ZurichX/scenery/APX_LSZH.BGL
Using airport customization from GSX.airports.lszh_fsdt

I hope that is what you weanted. I see a lot of missing files reported!

virtuali · « **Reply #38 on:** August 15, 2014, 07:29:35 pm »

Quote

I hope that is what you weanted. I see a lot of missing files reported!

None of the missing files are a problem, because it seems from your report you only had LSGG, Zurich and GSX, and those are exactly the ones that are being reported to be loading fine, it's the other that are reporting missing files, which is just normal, if you haven't installed the scenery.

There's nothing wrong in your LOG file, the only thing that MIGHT cause an issue, is this file:

Found gsx.cfg file at C:\Users\User\AppData\Roaming\Virtuali\Airplanes\SMS-MD-11\gsx.cfg

Which is a custom config you made for that airplane. If there's an error in it, or it's corrupted, it might cause GSX crashing on load, Try removing it, or moving it to a different folder.

msharwood · « **Reply #39 on:** August 20, 2014, 08:30:17 pm »

Well the mystery continues. I did that but no change. I have to start FSX then run couatl.exe. The reverse order also works.
The addon manager always shows that gsx is active.

virtuali · « **Reply #40 on:** August 20, 2014, 10:21:13 pm »

Do you mean that, if you let Couatl.exe starting from FSX automatically, you get the error, but if you start it manually after FSX started, you don't get any error ?

If yes, the only possible explanation is a conflict with another add-on, that is solved by changing the loading order of the modules.

msharwood · « **Reply #41 on:** August 21, 2014, 12:25:28 pm »

Yes, that is what I mean.
The only way I can get it to work is to start couatl.exe independently either before FSX startup or after.
How do I change the loading order? In FSX.cfg? I can see where it is in [trusted].

virtuali · « **Reply #42 on:** August 21, 2014, 02:07:14 pm »

Quote from: msharwood on August 21, 2014, 12:25:28 pm

How do I change the loading order? In FSX.cfg? I can see where it is in [trusted].

Change the ordering of modules to be loaded in the %APPDATA%\Microsoft\FSX\EXE.XML file, by rearranging the sections. You might also try to use the <Disabled> parameter ( set it to True ), to disable all other modules, to identify a possible conflict.

msharwood · « **Reply #43 on:** August 24, 2014, 01:02:12 am »

This is the contents of that file. Shouldn't couatl be in there? Which 'disabled' should I change from false to true?
<?xml version="1.0" encoding="WINDOWS-1252"?>

-<SimBase.Document version="1,0" Type="Launch">

<Descr>Launch</Descr>

<Filename>dll.xml</Filename>

<Disabled>False</Disabled>

<Launch.ManualLoad>False</Launch.ManualLoad>

-<Launch.Addon>

<Name>EZdok camera addon</Name>

<Disabled>false</Disabled>

<Path>C:\Program Files (x86)\EZCA\EZCA.exe</Path>

</Launch.Addon>

-<Launch.Addon>

<Disabled>False</Disabled>

<ManualLoad>False</ManualLoad>

<Name>UT2</Name>

<Path>C:\Microsoft Flight Simulator X\\Flight One Software\Ultimate Traffic 2\UT2Services.exe</Path>

<NewConsole>True</NewConsole>

</Launch.Addon>

-<Launch.Addon>

<Disabled>False</Disabled>

<ManualLoad>False</ManualLoad>

<Name>WinchX!</Name>

<Path>C:\Microsoft Flight Simulator X\Modules\WinchX!\WinchX.exe</Path>

<CommandLine/>

<NewConsole>True</NewConsole>

</Launch.Addon>

-<Launch.Addon>

<Disabled>False</Disabled>

<ManualLoad>False</ManualLoad>

<Name>Autothumbnail</Name>

<Path>C:\Program Files (x86)\Autothumbnail\Autothumbnail.exe</Path>

</Launch.Addon>

</SimBase.Document>

virtuali · « **Reply #44 on:** August 24, 2014, 10:11:01 am »

Quote from: msharwood on August 24, 2014, 01:02:12 am

This is the contents of that file. Shouldn't couatl be in there? Which 'disabled' should I change from false to true?

No, because that's your DLL.XML not the EXE.XML. Start by disabling everything in BOTH the EXE.XML, and the DLL.XML, and turn them on, one by one.

News: