Author Topic: FS9 version 1.0.3 Update  (Read 42825 times)

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50659
    • VIRTUALI Sagl
Re: FS9 version 1.0.2 Update
« Reply #15 on: August 10, 2010, 01:25:34 am »
Quick question - have you already submitted the files to Oliver for AES?

No, because we were just too busy working on the updates, but we'll do that very soon.

Opa

  • Newbie
  • *
  • Posts: 12
Re: FS9 version 1.0.2 Update
« Reply #16 on: August 10, 2010, 02:40:48 am »
The update only made things worse for me - now incoming aircraft land approx 2 feet UNDER the runway and stay that way.

Try to use the update, but then replace the AFCAD with the one that we posted yesterday on the forum, the one that correct parking assignments.

I am very pleased to report that the update plus the Afcad your directed me to appears to have corrected the "floating AI" issue.  :)

Thanks again for a fantastic enhancement and for such great, and prompt support.

toaster4

  • Newbie
  • *
  • Posts: 11
Re: FS9 version 1.0.2 Update
« Reply #17 on: August 10, 2010, 04:10:41 am »
I am still experiencing "stutters" with the update. The experience is smoother, however there is a noticible choppiness. It's similar to original release and the texture re-sizer. Is this something I am going to have to live with? I have a E8500, 4GB 1066mHz, 8800GTS 512.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50659
    • VIRTUALI Sagl
Re: FS9 version 1.0.2 Update
« Reply #18 on: August 10, 2010, 11:02:28 am »
I am still experiencing "stutters" with the update. The experience is smoother, however there is a noticible choppiness.

Try with the updated Textures resizer that has just been posted.

Tom C

  • Jr. Member
  • **
  • Posts: 73
Re: FS9 version 1.0.2 Update
« Reply #19 on: August 10, 2010, 02:37:46 pm »
Sorry if this has been asked or mentioned already, but I'm a little behind the times right now, damn work is so busy right now.
Has the main installer been updated yet?
I find it easier to keep track of updates when the main installer is done, rather than a few files to do it all.

Keep up the good work guys, thanks.
Regards.

Tom C.

Leffe

  • Newbie
  • *
  • Posts: 13
Re: FS9 version 1.0.2 Update
« Reply #20 on: August 10, 2010, 03:01:11 pm »
Yes, as you can see at the top of the Forum. Ver. 1.0.2. The only thing you´ll have to do is also
d/l the AFCAD from yesterday (see top of Forum) and replace it, and everything would be solved.

I have no probs whatsoever now, and didn´t even used the resizer, which also is updated now (ver.1.0.2) to
the current installer (for those with low end vram)

/ Leffe
Corsair Graphite 600T Midi Tower
Corsair TX-850 W
MSI P67A-GD80
i7 2600K @ (3.4) OC 4.3 GHz - Antec Kuhler H2O 920
Corsair Vengeance# DDR3 1600MHz 16GB
EVGA GeForce GTX 580 1536MB PhysX CUDA
Corsair SSD Force Series# 3, 120GB
Western Digital Caviar® Black 1TB
Win7 Ultimate 64-bit SP1

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50659
    • VIRTUALI Sagl
Re: FS9 version 1.0.2 Update
« Reply #21 on: August 10, 2010, 03:21:09 pm »
Yes, as you can see at the top of the Forum. Ver. 1.0.2. The only thing you´ll have to do is also d/l the AFCAD from yesterday (see top of Forum) and replace it, and everything would be solved.

No, if he downloads now, he doesn't need to do anything, the correct AFCAD is already included the the latest installer.

Tom C

  • Jr. Member
  • **
  • Posts: 73
Re: FS9 version 1.0.2 Update
« Reply #22 on: August 10, 2010, 06:04:12 pm »
Yes, as you can see at the top of the Forum. Ver. 1.0.2. The only thing you´ll have to do is also d/l the AFCAD from yesterday (see top of Forum) and replace it, and everything would be solved.

No, if he downloads now, he doesn't need to do anything, the correct AFCAD is already included the the latest installer.
That will do, I'll download as soon as I get home and finished tonight.
Regards.

Tom C.

a320driver

  • Newbie
  • *
  • Posts: 29
Re: FS9 version 1.0.2 Update
« Reply #23 on: August 10, 2010, 09:25:50 pm »
On my setup things improved quite a bit with this latest update. I was having some stuttering (even after running the texture re sizer) but this update seems to have corrected it. If possible (and when you have the time) it would be great if you could create the same type of updates for all the FS9 offerings. At any rate, thanks for offering this great add-on for FS9, and for the update!
Regards,
Joe Esposito

Deltalpha

  • Jr. Member
  • **
  • Posts: 84
Re: FS9 version 1.0.2 Update
« Reply #24 on: August 11, 2010, 01:26:44 am »
I'm really happy with DFW! Thanks for keeping FS9 Support!

Mike...

  • Full Member
  • ***
  • Posts: 108
Re: FS9 version 1.0.2 Update
« Reply #25 on: August 14, 2010, 08:06:55 pm »
I take it the texture update has something to do with alpha channels?

Either way, I'm downloading the updated installer now, should be able to check this weekend and do some trial runs.

DC10Driver

  • Newbie
  • *
  • Posts: 15
Re: FS9 version 1.0.2 Update
« Reply #26 on: August 17, 2010, 12:50:34 pm »
Hey guys, how do I know if I have the most up to date version of KDFW?  I downloaded it Friday and activated it Sunday but no where that I can see does it say version 1.0.2.

Leffe

  • Newbie
  • *
  • Posts: 13
Re: FS9 version 1.0.2 Update
« Reply #27 on: August 17, 2010, 03:28:26 pm »
Right click the installer and you will be able to see ver.#
/ Leffe
Corsair Graphite 600T Midi Tower
Corsair TX-850 W
MSI P67A-GD80
i7 2600K @ (3.4) OC 4.3 GHz - Antec Kuhler H2O 920
Corsair Vengeance# DDR3 1600MHz 16GB
EVGA GeForce GTX 580 1536MB PhysX CUDA
Corsair SSD Force Series# 3, 120GB
Western Digital Caviar® Black 1TB
Win7 Ultimate 64-bit SP1

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50659
    • VIRTUALI Sagl
Re: FS9 version 1.0.2 Update
« Reply #28 on: August 17, 2010, 08:18:44 pm »
Hey guys, how do I know if I have the most up to date version of KDFW?  I downloaded it Friday and activated it Sunday but no where that I can see does it say version 1.0.2.

You can check it in two different ways: before running it, by simply hovering the mouse over the setup exe file, the version number will be displayed, and as soon the installers starts, it will announce which version it's going to install.

And, you can check what version you currently *have* installed already, by going in the Windows Control Panel, then selecting the list of installed programs.

DC10Driver

  • Newbie
  • *
  • Posts: 15
Re: FS9 version 1.0.2 Update
« Reply #29 on: August 18, 2010, 12:17:40 am »
There ya go.  Well, thanks.  I was hoping that was going to solve the frame rate issues but I guess not.  Oh well, I still like having my hometown's major airport modeled on here finally.