Computer back up and running someone had a kickbut way to change the afterburner effects for the phantom i had the lights and smoke config backed up but not the new effects anyone remember who had done this it was really cool difference it made maybe this will help
Backup and remove both the Lights and Smoke sections of your aircraft.cfgs (the sections are the same for all cfgs).
Replace with the following:
[lights]
light.0 = 3, -16.43, -19.2, -3.00, fx_navred
light.1 = 3, -16.43, 19.2, -3.00, fx_navgre
light.2 = 1, -35.30, 0.00, 7.35, fx_navwhi
light.3 = 9, -17.55, 2.20, -3.36, fx_TU22Mflame
light.4 = 9, -17.55, -2.20, -3.36, fx_TU22Mflame
light.5 = 9, -6.75, 2.20, -3.72, fx_aniburnerTu22M1
light.6 = 9, -6.75, -2.20, -3.72, fx_aniburnerTu22M1
light.7 = 8, -22.45, 18.85, -3.00, c9F4_contrail
light.8 = 8, -22.45,-18.85, -3.00, c9F4_contrail
light.9 = 10, 9.70, 0.00, -0.90, fx_vclight
light.10 =10, 7.10, 0.00, 0.15, fx_vclight
light.11 = 2, 0.30, 0.00, 1.55, c9f4_strobew
light.12 = 2, 3.35, -3.35, -5.00, c9f4_strobew
light.13 = 2, 3.35, 3.35, -5.00, c9f4_strobew
light.14 = 2, -24.40, 0.00, 3.80, fx_beacon
light.15 = 7, 0.30, 0.00, 1.55, fx_navwhi
light.16 = 7, 3.35, -3.35, -4.80, fx_navwhi
light.17 = 7, 3.35, 3.35, -4.80, fx_navwhi
light.18 = 1, -24.40, 0.00, 3.80, fx_navred
light.19 = 2, -35.30, 0.00, 7.35, c9f4_strobew
[smokesystem]
smoke.0 = -4.8, -22, 2.4, c9F4_es
smoke.1 = -4.8, -22, -2.4, c9F4_es
smoke.2 = -4.8, -22, 2.4, fx_F14_ControlledHeat
smoke.3 = -4.8, -22, -2.4, fx_F14_ControlledHeat
Make sure the new Effects have been install in the Effects folder.
Have fun.
Bart
wish someone had the effects file anyone know who bart is?
