EBBR Aerosoft

[virtualstuff]

Update latest version
GSX Pro Profile for Aerosoft EBBR

Version 2.1
Make sure to update to GSX Pro version >2.91 or later

- Push and Pull with the latest GSX Pro version
- All gates - Custom stop positions per aircraft types
- New push back routes and procedures updated to current procedures in real life Brussels
- Custom sorting in GSX menu according charts
- Changed all VDGS objects for performance reasons Safedock T2S_24 Screen with Simbrief integration
- Catering and Handler added due to new contracts at EBBR
  Catering:

• Gategourmet
• Newrest

  Handlers:

• Alyzia
• Aviapartner

- Cargo Apron 9 changed completely with push and pull and multiple handlers
  Handlers

• DHL
• Swissport
• Aviapartner
• DNATA

- Added compatibility drag and drop installer from https://elevatesolutions.live/DDI_pages/DDIOverview/
- Per default if you want to avoid all VDGS loading but just the active user aircraft change this line disable_static_docks = 0 to 1
- Some gates are enabled with a work around unfortunately not a moving jetway (due to scenery design), but pax walk in (so they can be used)
  Gates are :

• 201
• 203
• 208
• 209
• 227
• 232

- Adjusted ground layout of support vehicles and small tweaks
- Fixed a few bugs
- Remote deicing pads

Install instructions:
Simple use the drag and drop installer from elevatesolutions (in combination with the zipfile below attached).
Or just save manual the two files:

• ebbr_aerosoft_v2.ini
• ebbr_aerosoft_v2.py

into the following directory:
(your drive letter)\ %and path% \AppData\Roaming\virtuali\GSX\MSFS

General remarks:
- Unless otherwise specified in the push-back procedures below or explicitly authorized by ATC, pulling
forward after push-back is only allowed when necessary and not further than the lead-in-line of the
departing stand.
- Aircraft shall not be pushed back further than the nose wheel limit line on TWY
(white perpendicular mark on TWY).
- ATC can give pushback instructions that may overrule the standard procedures.
- If no specific instructions from ATC have been received, no deviations from the standard pushback
procedure are allowed.

Version history:

version 1.06 GSX Pro compatible with 2.2.7 and attached at the bottom of this post!
Version 1.05 GSX Pro
Version 1.04 GSX Pro (make sure to have the latest GSX Pro version 2.2.3 > update)
Version 1.03 GSX Pro
Version 1.02 GSX Pro VDGS safedock@ T1S-42 system with Simbrief integration on all gates
Version 1.01 still available with Aerosoft VDGS system.in place
Version 1.01 minor update:
version 1.0 

[SK10]

Looking forward, keep it up!

[Flightdoc]

Thanks for working on this! I assume it will solve the no front stairs issue with the A320 (Flybywire) also? (Currently only the rear stairs are showing up)

[virtualstuff]

Ok version 1.0  is here some small tweaks to do and unfortunately some gates aren't available at terminal North 2 and south 2 a few.... Pull doesn't work so tried to make a work around here but this file is as close to real life possible...
place/save the attachment file in your directory (your drive):\Users\(your usr name)\AppData\Roaming\virtuali\GSX\MSFS
Make sure to run GSX cfg (via FSDT installer) and run the exclude 3d party option to avoid double gates!

[Flightdoc]

Thanks, will try it out!

[Brokenbroccoli]

Thanks, are you going to upload it to flightsim.to too?

[virtualstuff]

Thanks, are you going to upload it to flightsim.to too?

Yep after some other adjustments are done...

[virtuali]

Unfortunately its the only airport which doesnt work for me. I cannot connect any jetways and have doupled parking positions with different numbers.

If you see double parking, it's because you haven't disabled the airport from GSX jetways replacement, using the "Exclude 3rd party" button in the GSX Pro Config option in the Installer. Or, if it's not found automatically, insert the ICAO and add it to the Disabled list.

[SK10]

Unfortunately its the only airport which doesnt work for me. I cannot connect any jetways and have doupled parking positions with different numbers.

If you see double parking, it's because you haven't disabled the airport from GSX jetways replacement, using the "Exclude 3rd party" button in the GSX Pro Config option in the Installer. Or, if it's not found automatically, insert the ICAO and add it to the Disabled list.

It actually is dieabled as you can see...

[virtuali]

It actually is dieabled as you can see...

Check if it's not in the enabled list as well. If it is, move it again and Apply.

[SK10]

It actually is dieabled as you can see...

Check if it's not in the enabled list as well. If it is, move it again and Apply.

Okay, that was the problem and now the jetways are working, well sort of...
What is the problem now?

[SK10]

It actually is dieabled as you can see...

Check if it's not in the enabled list as well. If it is, move it again and Apply.

Okay, that was the problem and now the jetways are working, well sort of...
What is the problem now?

Which gate is that at terminal south 2? and which aircraft? the problem is the stop is to soon for the jetway to reach the aircraft maybe I should replace there the Aerosoft VDGS

The aircraft is the PMDG 737-800 and the gate was somewhere in the 230's don't know the exact spot anymore.

[SK10]

I have the 737-800 profile downloaded separately and it works well, tested gate 148 and all was good, but on gate 231R not anymore…

[SK10]

It was 233R sorry and it seems has to do with positioning. When I use the selection from MSFS it doesn't fit, but using the positioning from GSX then it works.

[Flightdoc]

At EBBR I can't seem to find an open gate. I choose an unoccupied gate from the menu, and whether I warp there or taxi there its occupied. Warp to a new empty gate - same thing. Is this something that can be adjusted from the file you are building or do I have to solve it on my own system in GSX config ? thanks