Author Topic: PMDG DC-6A and DC-6B CFG Request  (Read 8675 times)

Motormike

  • Newbie
  • *
  • Posts: 9
PMDG DC-6A and DC-6B CFG Request
« on: August 03, 2017, 07:00:59 pm »
Thank you :)

regards

mike

romoni

  • Newbie
  • *
  • Posts: 31
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #1 on: August 08, 2017, 01:40:41 pm »
+1

Rolf

kityatyi

  • Jr. Member
  • **
  • Posts: 82
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #2 on: August 15, 2017, 07:26:08 pm »
+1

Would love to use GSX with my DC6...

bachian

  • Newbie
  • *
  • Posts: 8
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #3 on: September 04, 2017, 05:54:09 am »
+1

romoni

  • Newbie
  • *
  • Posts: 31
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #4 on: September 07, 2017, 01:10:23 pm »
Well - I tryed to do a airplane customization by my self but all went wrong. Could somebody professional help with these PMDG DC-6A and DC-6B, please?

Rolf

bachian

  • Newbie
  • *
  • Posts: 8
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #5 on: September 28, 2018, 09:04:02 pm »
+1

qqwertz

  • Newbie
  • *
  • Posts: 31
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #6 on: October 07, 2018, 03:31:03 pm »
Here's a configuration file for the DC-6B, with door recognition. Ideally, the cockpit crew could be configured to enter the plane through a different entry, but I think that's not possible right now.

Peter

[aircraft]
nosegear = 10.79
refueling = 1
battery = 1
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 1.79 0.17 0.05
wingtippos = 17.18 0.36 1.56
fuelpos = 11.00 0.01 0.50
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -8.03 3.30 0.49
engine2pos = -3.76 4.22 0.06
engine3pos = 3.76 3.96 0.06
engine4pos = 8.03 3.30 0.49

[exit1]
pos = -1.33 -5.65 0.00 0.00
code = (L:MainCabinDoor,bool)
name = Cabin door
embeddedStair = -2.46 -5.54 0.10 -4.77 -5.55 -2.29

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
remove = 1

[service1]
remove = 1

[service2]
remove = 1

[cargo1]
pos = 0.49 7.88 -0.79 -4.20
code = (L:CargoMainDoor,bool)
name = Front cargo
embeddedStair = 0
uldcode = BELT

[cargo2]
pos = 0.47 -5.85 -0.78 3.70
code = (L:CargoMainDoor,bool)
name = Rear cargo
embeddedStair = 0
uldcode = AUTO

[cargomain]
remove = 1

qqwertz

  • Newbie
  • *
  • Posts: 31
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #7 on: October 07, 2018, 04:12:03 pm »
And here is the DC-6B. It has a few problems, though:
- I pointed the pax door to the front cabon door on the right side, but GSX2 is not boarding the crew. It just brings a bus to the left side of the plane.
- Containers in the front main cargo door are pushed to the left, i.e., into the cockpit. They are only there for a second or two, but it looks odd. Maybe Umberto can add a configuration option that enables a user to determine in which direction containers should be pushed.

Peter

[aircraft]
nosegear = 10.79
refueling = 1
battery = 1
iscargo = 1
trafficcones = 1
preferredexit =  0
wingrootpos = 1.79 0.17 0.05
wingtippos = 17.18 0.36 1.56
fuelpos = 11.00 0.01 0.50
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
engine1pos = -8.03 3.30 0.49
engine2pos = -3.76 4.22 0.06
engine3pos = 3.76 3.96 0.06
engine4pos = 8.03 3.30 0.49

[exit1]
pos = 1.19 9.29 0.04 -5.90
code = (L:FrontCabinDoor,bool)
name = Front cabin door
embeddedStair = 1.12 9.24 0.09 3.88 9.60 -2.88

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
remove = 1

[service1]
pos = -1.33 -5.66 0.03 0.70
code = (L:CargoEntrance,bool)
name = Cargo entrance
embeddedStair = 0

[service2]
remove = 1

[cargo1]
pos = 0.49 7.88 -0.79 -4.20
code = (L:CargoDoors,bool)
name = Front cargo hold
embeddedStair = 0
uldcode = BELT

[cargo2]
pos = -1.30 7.53 0.02 3.50
code = (L:CargoMainDoor,bool)
name = Front main cargo
embeddedStair = 0
uldcode = AUTO

[cargomain]
pos = -1.32 -7.28 0.02 -0.10
code = (L:CargoMainDoor,bool)
name = Rear main cargo
embeddedStair = 0
uldcode = AUTO

Midnight Music

  • Jr. Member
  • **
  • Posts: 51
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #8 on: October 10, 2018, 06:53:12 pm »
Works really well, the 2nd one, the DC-6A works really well if you remove service 1. Right now a cargo loader comes to the cockpit window with that enabled, but removing it, its gone.

Lee

BMW969

  • Newbie
  • *
  • Posts: 14
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #9 on: October 10, 2019, 12:11:18 am »
How to remove the front loader?
He pushes the container into the pilot's window. >:(

https://abload.de/img/1kuk0i.jpg
« Last Edit: October 11, 2019, 04:54:43 pm by virtuali »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50653
    • VIRTUALI Sagl
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #10 on: October 11, 2019, 04:55:05 pm »
You remove a loader by removing the associated door in the GSX airplane config page.

7heAngryVe7eran

  • Jr. Member
  • **
  • Posts: 60
    • TruNorth Air
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #11 on: October 29, 2019, 01:32:23 am »
Speaking of, could that be an option added to GSX in the future? The ability for the user to select which direction, (left, right, or straight in) for the boxes to be loaded? I would love this feature to be added.

aarnjer

  • Newbie
  • *
  • Posts: 22
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #12 on: April 14, 2020, 01:21:07 pm »
Try my config
It is only for DC-6B passenger vers.

trisho0

  • Sr. Member
  • ****
  • Posts: 340
Re: PMDG DC-6A and DC-6B CFG Request
« Reply #13 on: May 15, 2020, 04:08:55 am »
Try my config
It is only for DC-6B passenger vers.
Can you make GSX for A2A L-049 Connie Constellation aircraft?