« previous next »
Pages: [1]

Author Topic: Elevation problem on the surroundings?  (Read 4117 times)

AirBorne

  • Full Member
  • ***
  • Posts: 130
Elevation problem on the surroundings?
« on: May 18, 2014, 01:53:22 pm »
Hello,

I just notice this, please see the image below. I have already removed the .BGL from Orbx and the behavior is the same.

Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 50700
    • VIRTUALI Sagl
Re: Elevation problem on the surroundings?
« Reply #1 on: May 18, 2014, 06:44:46 pm »
Quote from: AirBorne on May 18, 2014, 01:53:22 pm
I just notice this, please see the image below. I have already removed the .BGL from Orbx and the behavior is the same.

Check you mesh settings, and be sure you have Complexity at 100 and resolution at 10 or 5 meters. If that doesn't fix it, then you have another mesh scenery in conflict.
Logged

AirBorne

  • Full Member
  • ***
  • Posts: 130
Re: Elevation problem on the surroundings?
« Reply #2 on: May 18, 2014, 11:04:58 pm »
It was set like that already, nevertheless I managed to solve the problem.
Now the only think I would like to right is the flickering/blinking of the ALS/LOC structures of the runways close to the sea, as this is very distractive in a short final, for instance.
There are also some other "jointing issues" here and there on the perimeter edge but I can live with them, as they're mostly undistractive in normal operations.
Logged
Pages: [1]
« previous next »