FSDreamTeam forum
General Category => General Discussion => Topic started by: asmmag on October 28, 2013, 09:38:10 pm
-
Hello FSDT!
I've been looking in the forum solutions for this error!
I tried but still did not work!
I have the following products: GSX, KLAX, KDFW and Chicago O Hare.
And now??
In case I do not have anti virus installed.
I deleted FSX and installed it again, only have FSX without any addon.
What should I do??
In my case, UAC is off - DEP is off too.
I tested Simconect.ini and gives the following message: 0.01684 Exe Launched Path = 'fsdreamteam \ couatl \ couatl.exe "CommandLine =" "Version 2.0.0.2354"
Also reinstalled VS2005.
I do not know what else to do!! Please help me!
-
It has been discussed many times already, for example here:
http://www.fsdreamteam.com/forum/index.php/topic,8334.msg68298.html#msg68298
As you can see, it's not a problem of our module, it's always something else that is affecting it. In this case, another FSX addon which wasn't fully compatible with Windows 7+ forced the Compatibility mode for FSX, which shouldn't be used.
-
Ok understand ....
I've read some threads on the subject, but still not working.
At the moment my only FSX with FSUIPC is installed and nothing more.
And why does not work? Had to reinstall fsx all over again.
And it works! What can be?
-
Had to reinstall fsx all over again.
And it works! What can be?
So it works now ? If yes, that's likely you had a problem with your VC++ runtime libraries, which is one (not the only one, but one of them) of the causes of that error, that the FSX installer was able to fix.
Sometimes is not needed to really reinstall FSX, but just doing a "Repair".
-
So here we go!
I formatted my PC, reinstalled W7 Ultimate and FSX.
Also installed the addon manager again, and the error continues!
Again uninstalled the addon manager, cleaned the cfg, C + + installed and rebooted the PC.
And tried again ..... still the same error!
4 hours and could not make it work! Help me!
-
I formatted my PC, reinstalled W7 Ultimate and FSX.
That wouldn't work, you will probably have to install all Windows Updates too.
-
I have removed all identical threads about this error. Please don't open identical threads for the same issue, which has been discussed many times in any case. Opening identical threads won't make your problem getting any more attention, it will only DELAY response time, because it will only duplicate support efforts in monitoring and replying to all identical threads. So, please, use only ONE thread, if the issue is the same.
I'm still entirely unable to replicate this problem, other than I sometimes get it randomly from all modules for all developers, but it happens like once in a month.
It seems strange that several users have reported it all at the same time yesterday. Is there something other software update that just came out you all installed ? A new antivirus update ? A new Windows Update ?
Just as a safety measure, I've re-uploaded all the bglmanx* files on both servers so, if you had the problem, try to reinstall any product (a scenery, GSX, or the Stand-Alone Addon Manager) now, and see if the problem goes away.
-
My appoligize for duplicate post! I installed orbx FTXG and North america no others software yet as i was trying to activate chicago when it happend . Initally the addon manager came up I entered my serial # it said it was wrong so i entered it again looked like it was going to take it and then the error happened. I just did a fresh install on a fresh formated ssd. All windows updates were done and antivirus was turned off and Uac . I am at work until tommorow However I will download the updated download manager and see what happens when I return home.
Best regards
Lt Michael Rose
-
Hi, big problem today! I fly to KLAX (in Trail-Version) today. In the near off LA I use the Addon-Manager in FSX to buy the KLAX from FSDream online. After putting in the Serial I get a crash off the FSX. After restart the Programm ther is an errormessage to deinstall the bglmanxx and the Libary-manager. I doen´t want to do this, but then the FSX get a crash wile loading. When I doen´t start the Manager, the FSX goes up, but in there, there is no Addon-manager and no GSX, KLAX and so on.
Can you help me?
Roland
-
After restart the Programm ther is an errormessage to deinstall the bglmanxx
As I've said:
f you had the problem, try to reinstall any product (a scenery, GSX, or the Stand-Alone Addon Manager) now, and see if the problem goes away.
Have you done that ? Even if the program hasn't changed, I've changed the version number to be 2.9.0.9, so you would know if you have the most updated version.
-
I had an AVG Update a few days ago but it wasn't working before this. I have placed in exceptions for the .exe and bglmanx files, I have reinstalled all visual libraries, reinstalled FSX 4 Times, and Add-on Manager is the first thing I install and still, nothing :(
UAC is off, and that other one you posted to do with the CMD is done. I am running FSX As Administrator and tried running couatl as admin. No compatibility is set and FSX cannot be changing because there is nothing else installed into it.
I am stuck :O
Thanks,
Callum
-
I am stuck
As I've said:
f you had the problem, try to reinstall any product (a scenery, GSX, or the Stand-Alone Addon Manager) now, and see if the problem goes away.
Have you done that ? Even if the program hasn't changed, I've changed the version number to be 2.9.0.9, so you would know if you have the most updated version. Please, confirm you are still having the problem with the update file.
-
Could this be a problem with the last update off the addon-manager? Before that I use the version .8? Maybe it is this, because all other Addons work in FSX without these off FSDream??
I reinstall now all off my FSD Airports and GSX and hope that will work. If not, I spend a lot of money for FSD and I think they will help us.
Roland
-
I reinstall now all off my FSD Airports and GSX and hope that will work.
No need to do that. Just download and install the Stand-Alone Addon Manager and let me know if it works now.
-
Sorry, same problem??
-
Downloaded the Addon Manager site, the version that appears is as follows: 2.9.0.8 is the correct version? Would not the 2.9.0.9 version that would have to appear for download?
-
Sorry, same problem??
Is this a question ?
-
Downloaded the Addon Manager site, the version that appears is as follows: 2.9.0.8 is the correct version? Would not the 2.9.0.9 version that would have to appear for download?
The installer hasn't changed version, the .DLL which is downloaded online has.
-
Ok, by downloading and will test
-
Negative,
Still not working
-
Still not working
So that's seems to indicate the problem wasn't a corrupted file on one of the servers or something like that. The only option left, is there's some kind of incompatibility with some other software or update you have in your system.
Do you have Teamviewer ? If yes, PM to arrange a session. If not, just download it, it's a free download.
-
Yes I have Teamviewer PM'ing you now.
-
There also does not work?
-
Hello Guys, i have this problem after install Vancouver on my FSX. How i can solve this?
Thanks!
-
Can I have some support please? This bglmanx issue is a huge problem. It is not just me. Look at the number of people who have had issues with it. I have tried every suggest you have on your forum. I politely request some assistance please. I have spent hours of my time on this issue.
Thank you
-
Really after 8 hours trying to fix this problem ... I give up!!
I spent almost 100 euros for 4 products and can not use because of a dll!!!
I did all the procedures described in the forum, and nothing!
My final attempt will be to go to a nearby store, buy the W8 and see what happens.
With all due respect, I feel frustrated with all this.
-
Can I have some support please? This bglmanx issue is a huge problem. It is not just me. Look at the number of people who have had issues with it. I have tried every suggest you have on your forum. I politely request some assistance please. I have spent hours of my time on this issue.
Thank you
Me too..
-
Can I have some support please? This bglmanx issue is a huge problem. It is not just me. Look at the number of people who have had issues with it. I have tried every suggest you have on your forum. I politely request some assistance please. I have spent hours of my time on this issue.
Thank you
The last reply from Umberto was THIS MORNING. Did you know he is a normal person who might have stuff to do, like eat, or make phone call, and can't be online 24\7? Chill out.
-
May be it is not interesting but the issue tells me this details:
bglmanx Dynamic Link Library
Version: 2,9,0,9
File: bglmanx.dll
Why Version 2,9,0,9? Iff you install the addon-manager there is Version 2.9.0.8 !!
May be this as something to do with the problem?
Roland
-
Exactly one normal person, but working in a company that would provide better support for their products to their customers.
In case if it can not be, who should be helping us??
So it is very easy to answer you in this way!! He is a normal person!!
We spend our money with the company of you want the minimum of attention possible for this to be resolved.
My PC is available to you, by entering teamviewer and solve it!
When it does come back here and thank you, as a normal person!
-
You can use my PC also.
Roland
-
Exactly one normal person, but working in a company that would provide better support for their products to their customers.
In case if it can not be, who should be helping us??
So it is very easy to answer you in this way!! He is a normal person!!
We spend our money with the company of you want the minimum of attention possible for this to be resolved.
My PC is available to you, by entering teamviewer and solve it!
When it does come back here and thank you, as a normal person!
And a NORMAL person, even after weeks of no support, would calmly ask why. A person without patience, would post something like that, after only a few HOURS.
Just WAIT, Umberto will be back on soon (within a matter of hours), and will help you fix your problems.
-
Be paient Guys we are all in here for the same Reason.Please give Umberto time to figure out our Problem he has help and fixed almost eveyones issues here ! AGAIN be paient!
-
Exactly one normal person, but working in a company that would provide better support for their products to their customers.
My last reply wasn't "this morning". Don't be confused with time zones and times indicated on the forum, which should also explain why you wouldn't see answers all over the 24 hours cycle.
My last reply here was 30 MINUTES AGO, because I've spent the last 30 minutes with ANOTHER user on Teamviewer investigating this issue, and I'm STILL connected to him, I've just spared 2 minutes to reply to your nonsensical post about the supposed "lack of support", which is even more offensive than it seems, when you are supporting one user and replying on another one AT THE SAME TIME.
Of course, we found the issue and, guess what, it wasn't a bglmanx.dll problem but, instead, a problem with the user who configured the P3D support in the wrong way, not according to our instructions.
That doesn't mean YOURS is the same problem. There are many possible causes for this error, we found one, yours might be different, even if the message you see is the same. The message is just a generic message that "something" is wrong.
-
Mine is a FSX issue wondering if FTXG is effecting if?
-
I've finished the Teamviewer session with cj_strawbs, we found the cause of his problem and was due to the following:
- The Addon Manager (bglmanx.dll) has a special mode of operation when used with P3D AND the Prepar3D Migration Tool. Since that tool "fools" applications to make them believe they are running under FSX, when in fact P3D is running, this wouldn't normally work with the Addon Manager, which must really know if it's running under P3D or FSX, because it needs to access specific memory areas which are different between the two. This won't be a problem with just P3D or FSX, the problem happens ONLY if using the P3D Migration Tool in Legacy mode.
- In order to overcome this issue, the Addon Manager can be forced to work in P3D mode even if it's being fooled by the Migration tool, using an environment variable. We explained the procedure here:
http://www.fsdreamteam.com/forum/index.php/topic,7237.0.html
With a sample batch file that, as you can see, SETS the variable before calling Prepar3d.EXE and UNSET the variable on exit. This for the precise reason that in case you want to run FSX after that, the variable must be cleared, otherwise the Addon Mananger will still run in P3D mode, even under FSX.
Unfortunately, cj_strawbs probably thought that, instead of using such batch file, he could achieve the same by setting a *permanent* environment variable, and that caused the crash, because now the Addon Manager was stuck in P3D mode, even when launched from FSX.
So, if you have the AddonManagerForcedVersion variable set to something, and run FSX, this will crash causing that error. Removing the variable from the permanent environment variables, fixed the problem for cj_strawbs. You can check your environment variables as explained here:
http://blogmines.com/blog/2010/02/12/how-to-change-environmental-variables-on-window-7/
As I've said, this was the cause on cj_strawbs system, it doesn't necessarily mean it will fix the issue on YOUR systems too, but it might be worth checking.
-
Exactly one normal person, but working in a company that would provide better support for their products to their customers.
My last reply wasn't "this morning". Don't be confused with time zones and times indicated on the forum, which should also explain why you wouldn't see answers all over the 24 hours cycle.
My last reply here was 30 MINUTES AGO, because I've spent the last 30 minutes with ANOTHER user on Teamviewer investigating this issue, and I'm STILL connected to him, I've just spared 2 minutes to reply to your nonsensical post about the supposed "lack of support", which is even more offensive than it seems, when you are supporting one user and replying on another one AT THE SAME TIME.
Of course, we found the issue and, guess what, it wasn't a bglmanx.dll problem but, instead, a problem with the user who configured the P3D support in the wrong way, not according to our instructions.
That doesn't mean YOURS is the same problem. There are many possible causes for this error, we found one, yours might be different, even if the message you see is the same. The message is just a generic message that "something" is wrong.
Ok, I'll wait then.
When you can, contact and use teamviewer on my pc.
Maybe you find the error.
I'm waiting, hug!
-
When you can, contact and use teamviewer on my pc.
I'm available now, just send your session id and password with a forum PM.
-
IM not using any mygration software only fsx and orbx as stated above ?intalled 9 fsdt airports and 3 FB plus addon manager tried to activate as stated in earlier and bam not working
-
When you can, contact and use teamviewer on my pc.
I'm available now, just send your session id and password with a forum PM.
ok now sending
-
Can I have some support please? This bglmanx issue is a huge problem. It is not just me. Look at the number of people who have had issues with it. I have tried every suggest you have on your forum. I politely request some assistance please. I have spent hours of my time on this issue.
Thank you
The last reply from Umberto was THIS MORNING. Did you know he is a normal person who might have stuff to do, like eat, or make phone call, and can't be online 24\7? Chill out.
-
I wasn't expecting this as support:
"The last reply from Umberto was THIS MORNING. Did you know he is a normal person who might have stuff to do, like eat, or make phone call, and can't be online 24\7? Chill out."
I politely asked and I politely ask agian.
Thank you
-
I didn't realize there are Teamviewer sessions taking place here. In fact, it is the first time I have heard of Teamviewer. I have installed it . Is it possible I can have a session please?
Paul
-
Paul please be patient he may find the cause and post what will fix it. We all want to be able to fly !
-
So it is! I hope he will do. The thing with the PeD I do not understand.
-
So it is! I hope he will do. The thing with the PeD I do not understand.
What are u running Predard 3D of Fsx??
-
FSX
-
Me also and we wait ! trust Umberto he does care about us having his product running
-
Hello to all, I've just finished the Teamviewer session with asmmag, and the issue was entirely different this time. Yes, even if the message "looks" the same, the problem was totally different.
Still related to Prepar3D, but in a different way. This time, I must admit it WAS a bug of the Addon Manager, there was a problem detecting the correct version of the program, which has been introduced when adding support for Prepar3D 2.0...:)
The issue is, the problem happened ONLY if the Addon Manager needed to display one of the FSX standard dialogs like the reactivation warning or the scenery outdated warning, if it had nothing to say, the problem would go unnoticed, this because the .DLL in FSX and Prepar3D 1.x that generated alert messages has *changed* its name in P3D 2.0, so the Addon Manager was trying to call an non existing library, because it incorrectly assumed it was running under the P3D 2.0 Beta...
The fixed files are online now, if you reinstall anything (a scenery, GSX, the Stand-Alone Addon Manager) you'll get them and will hopefully fix the problem for most of the remaining users that still had it, provided we don't find yet another reason for it...
I'm sorry, because this one was an oversight that was really my fault but, at least, you now know that all our products will be compatible with P3D 2.0 from DAY ONE, since we are already working on it.
-
OK now what about us running FSX??
-
Just download new version online ?
-
OK now what about us running FSX??
Re-read my message carefully: the program *wrongly* believed it was running under P3D 2.0, when in fact it was FSX running, THAT was the problem!
-
Just download new version online ?
No need to download anything, just reinstall a scenery, GSX or the Stand-Alone Addon Manager. The installer will always take the online version of the dll.
-
OK very good you are the best thanks again for your time in solving this issue
Cheers mate I sent you a Pm also.
Lt Michael Rose
ATP Capt Virtual United airlines
always a supporter of FSDT products
-
Hi Umberto, that was the problem. It works well now. Man many thank´s.
Roland
-
Hello,
I'm fixed at last!!!!!!! See the post Teamviewer session with cj_strawbs on page 3.
Sorry I was frustrated!
Paul
-
Again what did I tell everyone!!!!!! Umberto would figure out and make things right ! ;D
-
This has fixed the issue on my side as well.
Thanks!