FSDreamTeam forum
FS9 support => Zurich scenery for FS9 => Topic started by: newmanix on December 24, 2011, 03:00:41 am
-
So far I have noticed the following problems with the new update. I can get to how much I love the update later.
User and all AI aircraft float above the ground. Maybe an AFCAD dupe now that I think about it which means the old AFCAD is not being overwritten with the new installer. Also I did disable AES which made the old jetbridges go away but some old scenery objects remained.
Please see picture of floating aircraft and old left over objects.
D'
(http://i718.photobucket.com/albums/ww184/newmanix/fs92011-12-2317-54-28-43.jpg)
-
My AI and user planes are fine, but I too have that square thing floating above the new terminal. I also have those glass sqaure things that are in the screenshot in the first post.
(One glass thing is at gate B41 and the other is on the corner of the new terminal to the left of gate B47)
-
Floating AI don't have anything to do with the scenery, they are surely caused by another AFCAD in conflict.
To remove the double objects, see if you have an LSZH_ED_TMB_vtr.BGL file in your fsdreamteam\Zurich\scenery folder, and remove it. The 2.5 installer should have removed it, but it didn't for some reason...
-
I have three files connected with LSZH_ED_TMB:
- LSZH_ED_TMB
- LSZH_ED_TMB_M
- LSZH_ED_TMB_vtr
Should I remove only the last one?
-
After removing LSZH_ED_TMB_vtr,
no floating objects anymore, but isolated jetways at gate 43, 45 (see picture) on the ground.
By the way, Is the folder Zurich_terrain with a Lanclass file still necessary?
Ai aircraft are not floating and perfectly on the ground !
Thanks for this Christmas gift.
-
but isolated jetways at gate 43, 45 (see picture) on the ground.
I have the same issue...It seems that the old 'Dock B' jetways are still there.
Thanks for this nice gift, FSDT! 8)
-
After removing LSZH_ED_TMB_vtr,
no floating objects anymore, but isolated jetways at gate 43, 45 (see picture) on the ground.
By the way, Is the folder Zurich_terrain with a Lanclass file still necessary?
Ai aircraft are not floating and perfectly on the ground !
Thanks for this Christmas gift.
De-activate AES and it will go away. Version 2.5 isn't AES ready. Yet.
-
- LSZH_ED_TMB_vtr
Should I remove only the last one?
Only that one, just as I said.
-
Now Oliver has released a fix for AES v2.14/2.20 for Zürich v2.5.
And he notes that the second gateways aren't moveable, because they cannot be removed by AES.
Why is that?
-
It always been like that at Zurich since years, no change with this version, the secondary jetways are part of the terminal, so they can't be excluded.
-
just as I said.
No need to be angry.
Just asking.
Have a nice evening!
-
It always been like that at Zurich since years, no change with this version, the secondary jetways are part of the terminal, so they can't be excluded.
Ah ok, thanks for you answer
just out of inteterest:
Why didn't you export the secondary jetways seperated from the termainal?
Merry Christmas!
-
Why didn't you export the secondary jetways seperated from the termainal?
Because it's always been like this for the past 4 years since Zurich was initially released, and of course because splitting objects lowers the frame rate. We don't have plans right now to change this, we'll might revisit Zurich again in the future, but that update will be FSX only.
-
Why didn't you export the secondary jetways seperated from the termainal?
Because it's always been like this for the past 4 years since Zurich was initially released, and of course because splitting objects lowers the frame rate. We don't have plans right now to change this, we'll might revisit Zurich again in the future, but that update will be FSX only.
Hi Umberto, do have any idea why my aircraft would float? I did a complete search including complete uninstalls looking dor due afcads but none exist and this started only with the new update.
-
Hi Umberto, do have any idea why my aircraft would float? I did a complete search including complete uninstalls looking dor due afcads but none exist and this started only with the new update.
Sorry, but it can't be something related to the update, you must sill have some other file from another product hanging around. Problems with floating airplanes are usually caused by another AFCAD, but that's only the most common cause, not the only one, if it's a non-AFCAD .BGL, scanning program won't find it, so you have to search it manually.
-
Hi Umberto, do have any idea why my aircraft would float? I did a complete search including complete uninstalls looking dor due afcads but none exist and this started only with the new update.
Sorry, but it can't be something related to the update, you must sill have some other file from another product hanging around. Problems with floating airplanes are usually caused by another AFCAD, but that's only the most common cause, not the only one, if it's a non-AFCAD .BGL, scanning program won't find it, so you have to search it manually.
I have done that. I even tried to install the older version with no avail. So I cant even go back. And there is no issue with the default scenery. So there must be an issue somewhere here...
-
I even tried to install the older version with no avail.
This clearly proves neither the scenery or the update has anything to do with it, but it's something else in your system that is affecting it.
-
I even tried to install the older version with no avail.
This clearly proves neither the scenery or the update has anything to do with it, but it's something else in your system that is affecting it.
What I meant was your installer refused to install. I got an error msge saying that version is an older version and if I go into that area the FS will CTD. Something like that anyway. That's why no avail... I can understand that no one else is complaining of this issue but I am out of ideas here. Or no one is noticing the difference between a floating and grounded aircraft. Also, (only at the new terminal) The shadows of the terminal objects reflected onto the ground shimmer.
-
Narrowed down the problem. It was due to CH PRO. Your latest update is not compatable. We will need a fix. Soon as I disabled CH Pro there was no further issues. So it was not an AFCAD issue after all.
-
Narrowed down the problem. It was due to CH PRO. Your latest update is not compatable. We will need a fix. Soon as I disabled CH Pro there was no further issues. So it was not an AFCAD issue after all.
This clearly indicates it's a CH Pro problem, which needs a CH Pro fix, since it's solved by disabling it.
Assuming you use the CH Pro version of the Zurich installer, there's no difference whatsoever between the two sceneries, except the CH Pro version doesn't have seasonal changes to match the fact that CH Pro doesn't have seasons, and has ugly green texture colors to match the CH Pro ugly green texture colors, but they are the same nonetheless.
Any altitude problems created by CH Pro, are something that should be fixed there, since our scenery uses the correct published altitude for the airport, and it surely can't change between the two version (standard or CH Pro).
-
Narrowed down the problem. It was due to CH PRO. Your latest update is not compatable. We will need a fix. Soon as I disabled CH Pro there was no further issues. So it was not an AFCAD issue after all.
This clearly indicates it's a CH Pro problem, which needs a CH Pro fix, since it's solved by disabling it.
Assuming you use the CH Pro version of the Zurich installer...
Where do I get that?? your link is dead...
-
Where do I get that?? your link is dead...
The link on the Zurich page works, I've just tested it, it's likely your browser that is still showing the old page.
In any case, it won't change anything regarding your altitude problem because, if it was fixed by disabling CH Pro, switching to the CH Pro version of Zurich will just change texture colors.
-
Where do I get that?? your link is dead...
The link on the Zurich page works, I've just tested it, it's likely your browser that is still showing the old page.
In any case, it won't change anything regarding your altitude problem because, if it was fixed by disabling CH Pro, switching to the CH Pro version of Zurich will just change texture colors.
Ah.. okay... :-\
-
Hi Umberto
after installing v2.5 I have some problems at night, those aircraft-lines are shown as black rectangles. In daylight no problems.
-
Hi Umberto,
I noticed some strange things on the tower.
Some of them may be normal, but some other should not. Remarks are on the screenshots.
Best regards,
Emmanuel
-
Any support possible please?
-
We are still looking into it.