FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: romair on April 19, 2019, 07:50:29 am
-
Hello Umberto
Here attached a nice picture from Tronheim airport.
Passenger don't want to go to the bus. They like spotting from the roof of the Dash8.
Just for your info.
regards Roger
https://www.dropbox.com/s/majm25d7ar4of3g/ENVA-GSX.jpg?dl=0 (https://www.dropbox.com/s/majm25d7ar4of3g/ENVA-GSX.jpg?dl=0)
-
Assuming that's the Majestic Q400, since by default in GSX it doesn't come with an embedded staircase option (which has been added only very recently in GSX), it's safely to assume you are using a configuration you made yourself or downloaded and, clearly, whoever made that configuration, hasn't setup the Embedded stair correctly.
Please read the manual at Page 48, which explains how to create an Embedded stair. Note that, in order to work, it ALSO require a door to be configured properly ( the stair is an addition of a door, not a replacement for it), and give a bit of lateral space between the actual door and the starting point of the embedded staircase.
And of course, don't confuse the start and end positions: the start is the higher one, and end is the lowest.
-
Hello Umberto
Thanks a lot the advise and the fast eastern support in this matter.
with kind regards Roger