FSDreamTeam forum
Products Support => XPOI FSX/P3D => Topic started by: wbdrc on June 30, 2009, 06:25:48 am
-
XPOI installed but can not bring up menues using function keys. I do not know how to trouble shoot this problem. In FSX I do not get the Couati-powered products, kEY mAPPINGS..., xpoi - sETTINGS... WHEN CLICKING ON
-
If you don't see the Couatl powered plugin menu, XPOI can't obviously work, because it's a plugin written for that scripting engine.
Have you installed it recently ? Are you using the current installer ? If not sure, download it again.
Do you recall FSX asking you to authorize the Couatl scripting engine to run ? Have you replied Yes ?
Do you recall FSX asking you to authorize the Addon Manager to run ? Have you replied Yes ?
Also, check if you have a file named "Couatl.err" in your %APPDATA%\virtuali\ folder and if you have one, post its content.
-
Have you installed it recently ? Are you using the current installer ? If not sure, download it again.
I purchased it 6/27/09. I'm using the current .exe file to install. I have downloaded the install 3 times with the same negative results. I've removed the program prior to reinstall using Microsft's "Programs and Features"
Do you recall FSX asking you to authorize the Couatl scripting engine to run ? Have you replied Yes ?
I've not been prompted to authorize the install of the "Couatl scripting engine".
Do you recall FSX asking you to authorize the Addon Manager to run ? Have you replied Yes ?
Addon Manager is on the computer. I do not recall FSX asking me to authorize Addon Manager to run. It is listed in FSX under Add-ons along with FSUIPC. I also have KFLL installed! Addon Manager, when run, shows both XPOI & KFLL as being ACTIVE! To be fair, when I go to KFLL I'm fairly sure it isn't running either. The KFLL scenery appears to be the DEFAULT. The red power plant stacks are missing. KFLL shows in the Scenery listing as being added and active??
Also, check if you have a file named "Couatl.err" in your %APPDATA%\virtuali\ folder and if you have one, post its content.
I do not have "Couatl.err" anywhere on my computer.
Any help will be appreciated,
wbdrc (Bill Derenburger)
-
Ok, so you have the Addon Manager menu, but you don't have the Couatl powered plugins menu. That's why XPOI doesn't work.
Can you please post the content of your %APPDATA%\Microsoft\FSX\EXE.XML file ?
Also, open your FSX.CFG with Notepad ( it's located in %APPDATA%\Microsoft\FSX\ folder ), and look in the [Trusted] section, if you have any reference to the couatl.exe file. If you have, remove the *whole* line that contains it, save the file, launch FSX again, and please note if you get a request to trust the Couatl scripting engine, and obviously reply Yes.
If you still don't get any request to start it, perhaps it's the antivirus blocking it. Try to exclude the whole FSX folder from scanning OR, exclude the fsdreamteam\couatl\couatl.exe file from scanning, and reinstall XPOI again, with the antivirus configured as such.
-
Can you please post the content of your %APPDATA%\Microsoft\FSX\EXE.XML file ?
<?xml version="1.0" encoding="Windows-1252" ?>
- <SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>EXE.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>True</Launch.ManualLoad>
- <Launch.Addon>
<Disabled>False</Disabled>
<Name>GoFlight Hardware Interface</Name>
<Path>C:\Program Files\GoFlight\GFDevFSX.exe</Path>
<CommandLine />
</Launch.Addon>
</SimBase.Document>
Also, open your FSX.CFG with Notepad ( it's located in %APPDATA%\Microsoft\FSX\ folder ), and look in the [Trusted] section, if you have any reference to the couatl.exe file. If you have, remove the *whole* line that contains it, save the file, launch FSX again, and please note if you get a request to trust the Couatl scripting engine, and obviously reply Yes.
There is no reference to "couatl.exe" fiile in the [TRUSTED] sectioon of the FSX.CFG file.
If you still don't get any request to start it, perhaps it's the antivirus blocking it. Try to exclude the whole FSX folder from scanning OR, exclude the fsdreamteam\couatl\couatl.exe file from scanning, and reinstall XPOI again, with the antivirus configured as such.
I can turn off my antivirus program, delete the XPOI program and then reinstall XOPI. I sure do not know how to exclude the fsdreamteam\couati\couati.exe since I've never seen it! Will shutting down the antivirus protection be sufficient?
wbdrc
-
There's a problem with your EXE.XML file: there's no Couatl launching line at all, no wonder it doesn't start...
Your EXE.XML has a wrong tag in the GoFlight section: the <CommandLine> tag is not opened/closed normally, it should either be something like this:
<CommandLine></CommandLine>
OR
no <CommandLine> at all, because there's no actual command line parameter supplied anyway, so that tag is not needed.
Try to fix the tag or just remove it, and run the XPOI installer again.
-
There's a problem with your EXE.XML file: there's no Couatl launching line at all, no wonder it doesn't start...
Your EXE.XML has a wrong tag in the GoFlight section: the <CommandLine> tag is not opened/closed normally, it should either be something like this:
<CommandLine></CommandLine>
OR
no <CommandLine> at all, because there's no actual command line parameter supplied anyway, so that tag is not needed.
Try to fix the tag or just remove it, and run the XPOI installer again.
I WAS UNABLE TO EDIT OUT <CommandLine></CommandLine>
I WAS UNABLE TO DISABLE McAfee Antivirus Suite.
I removed XPOI and reinstalled. Negative result. Help
-
I WAS UNABLE TO EDIT OUT <CommandLine></CommandLine>
You only need to open the EXE.XML file with Notepad, change the line accordingly, save it back, then reinstall XPOI.
I WAS UNABLE TO DISABLE McAfee Antivirus Suite.
I don't think it's the antivirus at this point.
I removed XPOI and reinstalled. Negative result.
It's no use reinstalling, if you don't fix the file first. If you really can't, I've attached an already edited EXE.XML file that you can replace over the existing one.
-
I copied the supplied exe.xml file & replaced the one in my folder. I then reran XPOI. I got a message at the end of the install that said there was an error in my exe.xml file which had been replaced during the install. Upon FSX restart XPOI still does not function!
-
I forgot to add that now my GOFlight panel will not load, so the exe.xml file you supplied has also screwed that up. I'd like you to supply me with a new EXE.XML file that will allow my GOFlight panel to load automatically on FSX start up.
-
Ok, sorry, there was an extra space in the header that I haven't noticed.
If you download it again, it should be correct now
-
I kept a back up of the original EXE.XML so I used it to repair my GoFlight system. XPOI will not work on my system unless you can figure out a cure. By the way, when you edit a .XML file in a txt editor you end up with a .txt file, not a .XML file. OK
-
I kept a back up of the original EXE.XML so I used it to repair my GoFlight system.
Have you read my previous message ? I've fixed the file, it should work now. The download counter still read 0 so, it means you haven't tried the correct version.
XPOI will not work on my system unless you can figure out a cure.
Yes, XPOI will work on your system, if you use the XML file I've corrected for you. I've already figured out a cure, the problem was the tag in the Goflight section, it should now work, if you use the file.
By the way, when you edit a .XML file in a txt editor you end up with a .txt file, not a .XML file.
No, you don't, the file would still be a valid XML that FSX can read. In fact, FSX default XML files ARE .txt files, with an XML extension. By "Txt files" I mean a file that uses standard windows-style CR+LF line breaks, which are usually not needed in XML, but nonetheless ARE allowed, and that's the main difference compared to a .txt so, there are absolutely no problems editing XML files with a TXT editor, provided of course that editor is a pure text editor, not a word-processor, that's why I said you had to used Notepad, which can be used for this.
-
Thank you for the help. I'll try your corrected EXE.XML and see how I make out. Thanks for the lesson on editing. I normally use Notepad. Losing my GoFlight capability "made me very gun shy". I'll save my old one in case I get screwed up again.
Bill
-
SUCCESS!! Thank you very much for your help and solution to my problems. My faith is restored! You do good work.
wbdrc
-
I have a problem with your EXE.XML. It does not load my GOFlight panel. It does allow XPOI to function. Can you revise EXE.XML to allow both XPOI & GOFlight to function. Here is the GOFlight EXE>XML:
<?xml version="1.0" encoding="Windows-1252" ?>
- <SimBase.Document Type="Launch" version="1,0">
<Descr>Launch</Descr>
<Filename>EXE.xml</Filename>
<Disabled>False</Disabled>
<Launch.ManualLoad>True</Launch.ManualLoad>
- <Launch.Addon>
<Disabled>False</Disabled>
<Name>GoFlight Hardware Interface</Name>
<Path>C:\Program Files\GoFlight\GFDevFSX.exe</Path>
<CommandLine />
</Launch.Addon>
</SimBase.Document>
-
There's no reasons why the XML I've edit wouldn't load the GoFlight. You must have made some kind of mistake and not using the correct files.
As I've said, just edit the the file with Notepad and change this line
<CommandLine />
to become like this:
<CommandLine></CommandLine>
OR, just remove the line, the end result it's exactly the same: it's an empty tag, so it doesn't matter at all.
Then run XPOI installer again.
OR, if you can't edit it yourself, you can try this:
- delete the EXE.XML file.
- run the XPOI installer, if there's no EXE.XML the installer will recreate a correct one
- verify XPOI works
- run the GoFlight installer
-
by me the problem is that the "XPOI Settings.." menu is missing. I have only the "Key mappings.." menu under the Couatl plug-in and nothing happens when I click on it. The
I've un and reinstalled as suggested, cleaned the exe.xml but no succes.
-
If you see the "Couatl powered plugins" menu, but not the "XPOI settings" menu, it means the software is working and the Couatl engine is working so, there's no need to check the EXE.XML because, if there was a problem with it, you wouldn't see any menu at all.
So, if you are missing only the XPOI menu, it means XPOI is not installed. You must have made some kind of mistake when uninstalling.
Try to do the following, only the following, and don't do anything else:
- Uninstall XPOI and reply YES to the question of removing the Addon Manager, and reply YES to the question about removing the Couatl engine.
- Go to the FSX\fsdreamteam\Couatl folder, and check the XPOI folder has been removed. If not, remove it manually.
- Reinstall XPOI, and check if you see both menus, and XPOI of course.
If you still don't see them, check if you have a Couatl.err file in the following folder:
%APPDATA%\virtuali
and see if there are any error messages inside.
-
thx Umberto
that's worked ;)