FSDreamTeam forum
Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: Numair999 on October 01, 2018, 06:59:18 pm
-
OMDB flyTampa Concourse 2 & 3 with real positions for the ground handling, UAE A380's and 777's.
I have updated the AFCAD of the FT-OMDB to match RWOPS of UAE and FDB traffic have been shifted stands 'E'cho. Parking stands West 'C"harlie 18-40 have been also updated to accomodate UAEA380's and 777's
AFCAD is to be used if required and its not mandatory for the airport. Its upto you!.
This is the First phase of update to OMDB, Next will be Concourse A,
The last update will be Docking system @ 'E'cho and Far North Parking 'S'iera with APRON.
Let me know your Feedback on this.
Installation:-
1. set the following .bgl's in your Dubai/scenery folder to .OFF
a. omdb_terminal02_jets01
b. omdb_terminal03_jets01
c. omdb_terminal01_jets01
d. omdb_jetway_lib
2. If you want to use the AFCAD I have updated then change the change the existing OMDB_ADEX_FLYTAMPA.bgl to .OFF and copy the one in the folder
3. copy the .ini file to C:\Users\(SysName)\AppData\Roaming\Virtuali\GSX and remove(or backup) any previous OMDB .ini files.
4. copy the 000_OMDB_GSX_JWEXCL to your C:\Program Files (x86)\Addon Manager\FsDreamTeam\Exclude
Note that Concourse A default jetways will be disabled and not visible! you will see the FSDT jetways but not setup in the proper manner. W.I.P!
You may use this now or wait a couple of days for the update.
-
Thank you!
-
Thanks. Let me know if you need any help completing DXB. I was thinking of starting my own project for this but seeing as you've already done a bit of the work, we can work on it together and have it out for the general public sooner.
-
any luck with completion of OMDB?
Thanks
-
Hey there, Sorry guys been busy with my professional errands so haven't had much time to get it done.
anyways that being said, will begin today on the Seirra apron and Echo gates. Will update once I have completed within this week.
-
Thanks. No pressure.
-
Did you ever get around to posting that update? Really awesome work so far!
-
1. set the following .bgl's in your Dubai/scenery folder to .OFF
a. omdb_terminal02_jets01
b. omdb_terminal03_jets01
c. omdb_terminal01_jets01
d. omdb_jetway_lib
By setting those three .bgl to off all the static and IK-Jetways dissapear?
-
I understand new afcad is based on p3d. Is it possible to create one for fsx?
Thanks
-
OMDB flyTampa Concourse 2 & 3 with real positions for the ground handling, UAE A380's and 777's.
I have updated the AFCAD of the FT-OMDB to match RWOPS of UAE and FDB traffic have been shifted stands 'E'cho. Parking stands West 'C"harlie 18-40 have been also updated to accomodate UAEA380's and 777's
AFCAD is to be used if required and its not mandatory for the airport. Its upto you!.
This is the First phase of update to OMDB, Next will be Concourse A,
The last update will be Docking system @ 'E'cho and Far North Parking 'S'iera with APRON.
Let me know your Feedback on this.
Installation:-
1. set the following .bgl's in your Dubai/scenery folder to .OFF
a. omdb_terminal02_jets01
b. omdb_terminal03_jets01
c. omdb_terminal01_jets01
d. omdb_jetway_lib
2. If you want to use the AFCAD I have updated then change the change the existing OMDB_ADEX_FLYTAMPA.bgl to .OFF and copy the one in the folder
3. copy the .ini file to C:\Users\(SysName)\AppData\Roaming\Virtuali\GSX and remove(or backup) any previous OMDB .ini files.
4. copy the 000_OMDB_GSX_JWEXCL to your C:\Program Files (x86)\Addon Manager\FsDreamTeam\Exclude
Note that Concourse A default jetways will be disabled and not visible! you will see the FSDT jetways but not setup in the proper manner. W.I.P!
You may use this now or wait a couple of days for the update.
Hello the safe gate system for all the E gates is positioned right in front of the aircraft gate, rather than more forward on the large overhang in front of each gate. Have you had time to update the file more? Thank you
-
I know this was like 3 years ago, but any update? Many thanks in advance!
-
I know this was like 3 years ago, but any update? Many thanks in advance!
Hi, I complete all position missing and corrected few parking stand ... so now All airport is OK (July 2020)
just copy the .ini file to C:\Users\(SysName)\AppData\Roaming\Virtuali\GSX and remove(or backup) any previous OMDB .ini files.
-
Just if anyone wonders
This works for FSX as well.
Just update the ini-file with the path to the fsx ADEX-file
e.g. afcad_path = D:\Microsoft Flight Simulator X\FlyTampa\Dubai\scenery\OMDB_ADEX_FLYTAMPA.bgl
Notes
- I did not change the AFCAD file
- I started by make a GSX 2 change on the airport. This created the GSX ini-file. with the correct afca path. I then copied the content from omdb-flytampa.ini to this file.
Mats