FSDreamTeam forum
Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: j0rpool25 on September 10, 2018, 06:44:10 pm
-
Hi there,
For a few days, i have bin working on the Flytampa Amsterdam.
I have finish the B and D pier. also some gates at G-pier.
Tomorrow i will fix the C pier.
Later this week i will try to finish the E-pier.
Here i have some pictures. When its all finish. I will share the files.
B-Pier
(http://i67.tinypic.com/143q0jl.jpg)
D-pier
(http://i65.tinypic.com/2cshva0.jpg)
(http://i64.tinypic.com/2mwwn6b.jpg)
In the Flytampa version, you see 1 jetways at this side of the D-pier. In reallife, there are 4 gates with double jetways for wide body's. So i fixed that.
(http://i67.tinypic.com/2qwn6ds.jpg)
G-pier
flytampa made G4 with single jetway. In reallife it have a double jetway, so i fixed it
(http://i64.tinypic.com/2u7t6xx.jpg)
Its a lot of work to do, but i like to do it.
-
Thanks a lot!!!!!!
Nice to see that it are the same jetways
-
Thanks a lot!!!!!!
Nice to see that it are the same jetways
Not exactly the front is different and I will make a custom one for that particular model ;-)
Since EHAM is my hometown airport already have done B/C/D/H to do E/F/G wit pushback routines as in real life
-
So, i finish the first 3 Pier at Schiphol.
3 more to go!
Enjoy the pictures
-
So, i finish the first 3 Pier at Schiphol.
3 more to go!
Enjoy the pictures
Do you have email I already finished mine so maybe you could use some ;-)
Can sent you my files ;-)
-
Im finish.
You can download it now.
Click on the link: https://ufile.io/s90q1 (https://ufile.io/s90q1)
-
So, i finish the first 3 Pier at Schiphol.
3 more to go!
Enjoy the pictures
Do you have email I already finished mine so maybe you could use some ;-)
Can sent you my files ;-)
Im also finish the job haha
-
So, i finish the first 3 Pier at Schiphol.
3 more to go!
Enjoy the pictures
Do you have email I already finished mine so maybe you could use some ;-)
Can sent you my files ;-)
Im also finish the job haha
No problem not a contest here lol but you could benefit from the work already done here local with custom push-back routines as in real life ;-)
-
Hi awf,
I'm interested by your work. Could ypu please send it at yves(at)samuel.lu
Thank's a lot in advance
Yves
-
AWF, why are you not just sharing the files here so everybody can use them.
Thanks
-
Beacuse he still works on them as he said...
-
AWF, why are you not just sharing the files here so everybody can use them.
Thanks
I already post it haha,
click on the link: https://ufile.io/s90q1
-
Beacuse he still works on them as he said...
I posted the link above already,
Click on the link: https://ufile.io/s90q1
;D ;D ;D ;D
-
Great job j0rpool25, but when I park my PMDG 77W at the F-pier gates it only recognizes door 1 and not door 2.. Any idea how to fix this?
-
Hi,
I have a problem : I only have jetways on G pier.
Any solution?
Thank's
Yves
Edit : I found the solutions :
- you use east afcad, so I modified this in the configurator
- As my addon mamanger is not in c:, I had to modify the directory.
Now it works
Thank's
Yves
-
Hello in views all things are OK! but unfortunately, when action (deboarding, ...), FPS become awfull, please can you see or give me help thanks!
-
Beacuse he still works on them as he said...
I posted the link above already,
Click on the link: https://ufile.io/s90q1
;D ;D ;D ;D
Hi there
Could you share your xml file for schipol please ? cuz each time i start GSX control panel eham's exclude bgl file is deleted from folder
Regards
-
TRy to put it in EHAM scenery folder.
Yves
-
Beacuse he still works on them as he said...
I posted the link above already,
Click on the link: https://ufile.io/s90q1
;D ;D ;D ;D
Hi there
Could you share your xml file for schipol please ? cuz each time i start GSX control panel eham's exclude bgl file is deleted from folder
Regards
https://drive.google.com/file/d/1eaPZ9x9v9VAwYbO3PfJQEWQ0unqdXWsA/view
I put the XML file in the folder.
-
A clarification:
If you share just the .BGL without the .XML, it will be removed by the Control Panel, because it's considered to be orphaned. This is normal, to prevent the exclude folder to become a mess very quickly.
So, if you want to share the exclude file, you should provide also the XML that will stay in the Exclude folder, one level above the scenery folder that contains the .BGL. However, you don't have to do that, since the parking customization can recreate the XML automatically from the .INI file.
This can be done by opening the parking customization for that airport, and deselect/select any one parking that had the Exclude checkmark set. You can do it by changing anything else, but this is the easiest one and the easiest to remember. This will trigger the parking editor to create the Exclude XML, which can be then compiled into a .BGL.
-
A clarification:
If you share just the .BGL without the .XML, it will be removed by the Control Panel, because it's considered to be orphaned. This is normal, to prevent the exclude folder to become a mess very quickly.
So, if you want to share the exclude file, you should provide also the XML that will stay in the Exclude folder, one level above the scenery folder that contains the .BGL. However, you don't have to do that, since the parking customization can recreate the XML automatically from the .INI file.
This can be done by opening the parking customization for that airport, and deselect/select any one parking that had the Exclude checkmark set. You can do it by changing anything else, but this is the easiest one and the easiest to remember. This will trigger the parking editor to create the Exclude XML, which can be then compiled into a .BGL.
So if I unerstand this correct, yoiu just share the bgl file, and not the xml, since this last one you can recreate it by loading the shared bgl, and the ini file, and then, activate and deactivate one of the exclusions for p3d to create an exclusiion. Thus, wouldn't it be easiera to have the 3 files and not need to do anything? (.ini, .bgl, and .xml)? (provided of course that the receipient of the shared file has the exact same scenery and editing the path of such in the .ini file. is this correct Umberto?
-
Beacuse he still works on them as he said...
I posted the link above already,
Click on the link: https://ufile.io/s90q1
;D ;D ;D ;D
Hi there
Could you share your xml file for schipol please ? cuz each time i start GSX control panel eham's exclude bgl file is deleted from folder
Regards
https://drive.google.com/file/d/1eaPZ9x9v9VAwYbO3PfJQEWQ0unqdXWsA/view
I put the XML file in the folder.
@Jorpoll25 Thanx man it works fine with the xml file
Regards
-
A clarification:
If you share just the .BGL without the .XML, it will be removed by the Control Panel, because it's considered to be orphaned. This is normal, to prevent the exclude folder to become a mess very quickly.
So, if you want to share the exclude file, you should provide also the XML that will stay in the Exclude folder, one level above the scenery folder that contains the .BGL. However, you don't have to do that, since the parking customization can recreate the XML automatically from the .INI file.
This can be done by opening the parking customization for that airport, and deselect/select any one parking that had the Exclude checkmark set. You can do it by changing anything else, but this is the easiest one and the easiest to remember. This will trigger the parking editor to create the Exclude XML, which can be then compiled into a .BGL.
Thanx umberto for the explanations
Regards
-
@Jorpoll25 thanks for the sharing, nice work.
Regards
-
A clarification:
If you share just the .BGL without the .XML, it will be removed by the Control Panel, because it's considered to be orphaned. This is normal, to prevent the exclude folder to become a mess very quickly.
So, if you want to share the exclude file, you should provide also the XML that will stay in the Exclude folder, one level above the scenery folder that contains the .BGL. However, you don't have to do that, since the parking customization can recreate the XML automatically from the .INI file.
This can be done by opening the parking customization for that airport, and deselect/select any one parking that had the Exclude checkmark set. You can do it by changing anything else, but this is the easiest one and the easiest to remember. This will trigger the parking editor to create the Exclude XML, which can be then compiled into a .BGL.
Thanx umberto for the explanations
Regards
Hi guys, here is EHAM fully configurated for the jetways. did not change the parking position of the rest of the elements. ENJOY!
-
Somehow winrar does not like this zip file and always quits with an error. Pity...
-
Somehow winrar does not like this zip file and always quits with an error. Pity...
Easy fix. Change extension file from ,rar to .7z and voila!
-
I have no Jetways @EHAM , what i have to do?
Whats wrong?
-
I have no Jetways @EHAM , what i have to do?
Whats wrong?
try reloadiing the Coautl in the addon menu. i used to have that problem a lot. it was all solved by totally uninstalling gsx and reinstalling. When I purchased it, insted of doing that, i did the upgrade to level 2. Big mistake.
-
Be also aware that the afcad used is the east one. So change first in FT configurator, then copy the afcad.
Yves
-
from where to copy where?
-
Easy fix. Change extension file from ,rar to .7z and voila!
Nope, does not work, same error message...
-
I followed the instructions and I have no jetways (do I have to purchase gsx for the jetways to appear?)
-
Be also aware that the afcad used is the east one. So change first in FT configurator, then copy the afcad.
Yves
Were i have to copy it? From wich folder to wich?
-
If you look in the zip file, you will see that the afcad is the east acad. So you need to activate the east afcad throu FT configurator, rename in any name (.old for exemple), then copy the file ADEX_FLYTAMPA_EHAM_2016_EAST.bgl ain yous ../amstrrdam/scanery folder., and then it will work.
Yves
-
If you look in the zip file, you will see that the afcad is the east acad. So you need to activate the east afcad throu FT configurator, rename in any name (.old for exemple), then copy the file ADEX_FLYTAMPA_EHAM_2016_EAST.bgl ain yous ../amstrrdam/scanery folder., and then it will work.
Yves
I did it, it still does not work.
-
do i have to purchase gsx for the jetways to appear?
-
do i have to purchase gsx for the jetways to appear?
Yes, to use a non-FSDT airport, you must own both GSX and the Level 2 expansion.
-
If you look in the zip file, you will see that the afcad is the east acad. So you need to activate the east afcad throu FT configurator, rename in any name (.old for exemple), then copy the file ADEX_FLYTAMPA_EHAM_2016_EAST.bgl ain yous ../amstrrdam/scanery folder., and then it will work.
Yves
I did it, it still does not work.
Now it work´s , but i have 2 Jetways there? How i remove it?
-
Now it work´s , but i have 2 Jetways there? How i remove it?
Have you followed the video tutorial posted at the top of the GSX support section ?
It's made precisely at FlyTampa EHAM. Basically, you must start by excluding an existing jetway first, exit the sim, compile the exclude file with the GSX Control Panel, restart the sim, and the original jetway will disappear.
IF you downloaded a pre-made customization file, it's enough entering the customization page, and change anything (clicking twice on any one Exclude checkmark), will be enough to have the exclude XML source file to be recreated from the exclude areas in the .INI file you downloaded, so you can compile it.
-
Easy fix. Change extension file from ,rar to .7z and voila!
Nope, does not work, same error message...
You need to use 7z1604-x64 (7-Zip) if your platform is windows 64-bits.... google on that. Winrar will not extract such file but 7-Zip
-
What to do with FSDT GSX Control Panel?
I selected the EHAM to compile then I hit "Compile" but still there...
-
What to do with FSDT GSX Control Panel? I selected the EHAM to compile then I hit "Compile" but still there...
You already did what you need to do: just hit Compile. Assuming, of course, it created the exclude file with no errors.
-
Hey guys, I have made a Full Tutorial of GSX2.. hope you guys like it!
hhttps://www.youtube.com/playlist?list=PL_jo_TDZG12UYkZ_tZ58ThN6ZDVyh_Ukq
-
If you look in the zip file, you will see that the afcad is the east acad. So you need to activate the east afcad throu FT configurator, rename in any name (.old for exemple), then copy the file ADEX_FLYTAMPA_EHAM_2016_EAST.bgl ain yous ../amstrrdam/scanery folder., and then it will work.
Yves
Hi Yves:
Could you explain this again? I'm not understanding the instructions you are giving. Thank you.
-
Hi:
I'm having issues as some gates are missing at some parking position, help please.
-I have downloaded the 4 files posted above.
-I have installed the files in GSX as stated in the text doc.
-I have run the compile check in GSX control panel.
-I have run the restarted and run the airport catch in Couatl in the sim.
-GSX is mapping to the right correct location.
Thanks.
-
Thank you j0rpool25!
Very good job.
-
Why can't I download the file it says Premium Access Only?
-
Why can't I download the file it says Premium Access Only?
That's a stupid place to upload files. In the middle of the thread is a better link.
https://drive.google.com/file/d/1eaPZ9x9v9VAwYbO3PfJQEWQ0unqdXWsA/view (https://drive.google.com/file/d/1eaPZ9x9v9VAwYbO3PfJQEWQ0unqdXWsA/view)
Be sure to follow instruction. You need GSX and GSX2 to use these files.
-
Thank you
-
THanks, is it fully updated now? I decided to check newer versions due to missing jetways i found while flying. But i dont know if this is a final version(lets say completed version)
Happy Flying 8)
-
THanks, is it fully updated now? I decided to check newer versions due to missing jetways i found while flying. But i dont know if this is a final version(lets say completed version)
Happy Flying 8)
Dont think so... It looks like 50% completed or so... Very promising!!
-
Hey , the link doesn't work. I'm very intrested. I'm from Holland to😁
-
Hello,
Unfortunately all links to SODE files for FT Amsterdam are all dead. Could you share them please or point me to the right place for them.
Much thanks,
-
Hello,
Unfortunately all links to SODE files for FT Amsterdam are all dead. Could you share them please or point me to the right place for them.
Much thanks,
I wish I could get them too. Every link = dead as a dodo
-
It seemed a splendid work but link doesn't work anymore