FSDreamTeam forum
Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: lukiono on September 09, 2018, 03:38:04 pm
-
Greetings
Use the files from Chasmin91 below. much more advanced: http://www.fsdreamteam.com/forum/index.php/topic,18549.msg129376.html#msg129376
This is a first version for a simple replace of the non-static jetways to sode jetways at LSZH
Notes:
- At the Gates Bravo and mostly Echo are static jetways. i will look further for a solution to disable them and then enable full jetway support at every gate.
- Due to the limitations of SODE the height of jetways cant be edited. this is and will be a (graphical) problem for the Echo gates.
- The Positions of some jetways are not optimized yet but they will with future updates
- The jetways are also not the exact same model as the original. there are no jetways with white rubber at the front available
Install steps:
- Download the archive file from here: removed
- Extract the archive to a folder of your choice
- Copy the whole folder "FSdreamteam" into your addon manager folder
- Copy the whole GSX folder to appdata/roaming/Virtuali
- Run your FSDT GSX Control Panel and make sure that the bgl is up to date. if not, compile it
- Now youre done and can start the flightsim. Have fun
Kind regards
Lukas
-
Nice, thanks!! I just did a flight from LSZH in P3D and thought to myself "I hope someone makes a GSX config for this and other Aerosoft airports"... I'll try it out in a moment. Cheers!
Chris
-
Its not working with large aircrafts, such as the A330/A340/B77W at the B and E gates
-
Thanks for the report
checked it with the stock 777 from PMDG and the afcad that comes from aerosoft itself. and you're right...
all heavy gates, expect the a380 gate at E and stands at W, are not supporting heavys... sometimes i "love" aerosoft...
need to compare this gate for gate with real life wingspan values.... but this will take some time.
Edit: I've written a mail to the airport itself. now we need to wait for a answer but with some luck we getting the actual max allowed wingspan for every gate
-
Thanks for your quick answer, I thought, I made a mistake, by not implementing your file correctly. But since I have tested the B and E Gates with smaller a/c and it's working, I thought it could have something to do with the wingspan.
I'm standing by for the answers you get :-)
Thanks for your effort
-
I will upload my Zurich config tonight!
All E Gates are working!
-
Great to hear, what did you have to change in order to get it working?
-
I adjusted every gate one by one and I have my own afcad for ZRH.
I will upload both Later!
-
Here my Zurich config and AFCAD
Turn off all 3 Original AFD files in P3D/Ecosystem/Aerosoft/MegaAirportZuerichV4/Scenery
AFCAD: Landing Runway 14, TakeOff Runways 28 & 16
-
Great to hear, what did you have to change in order to get it working?
Pretty simple have done Zurich complete with working gates and custom logo's now working on the pushback stuff...
Make sure to rename the following files in Lockheed Martin\Prepar3D v4\Ecosystem\Aerosoft\Mega Airport Zuerich V4\Scenery
LSZH_OBJ-Jetways.BGL to LSZH_OBJ-Jetways.BGL_off
LSZH_LIB-Jetways.BGL to LSZH_LIB-Jetways.BGL_off
That will remove the static jetways from the E terminal ;-)
-
Great to hear!!
But for me its not working, i cant start the Sim.
-
Thank you very much Chamsin for the files
Move the files out of the folder. this way it seems to work
-
welcome!
Its working now.
I will upload a updated file tomorrow with the second Jetway at E & B Gates
-
First Gate DONE with second Jetway!
-
Yay, it's working and I'm enjoying the first deboarding sequence test with the SkySpirit2012 77W in SWISS Livery at Gate E19. Looks great and I'm looking forward for the second jetway.
-
First Gate DONE with second Jetway!
Tip use for the second the jetway with upper in the name ;-)
-
UPDATE
NEW AFCAD included
Please Redownload AFCAD and lszhu61f6h again! UPDATED V2
UPDATE V3 includes UBS Logo on all Jetways Redownload only lszhu61f6h file
UPDATE V3 includes A380 Jetway at Gate E67 Redownload lszhu61f6h
UPDATE V4 please Redownload all three files lszh-u61f6h.ini 000_LSZH_GSX_JWEXCL.xml 000_LSZH_GSX_JWEXCL.BGL
1. Delete all 3 AFCAD files from P3D V4/Ecosystem/Aerosoft/MegaAirportZuerichV4/Scenery
2. Copy the AFCAD file into the same folder
3. Delete LSZH_OBJ-Jetways & LSZH_LIB-Jetways (safe this files)
4. Copy the file lszhu61f6h to YouName/AppData/Roaming/Virtuali/GSX
5. Copy 000_LSZH_GSX_JWEXCL.XML to Addon Manager/FSDreamTeam/Exclude
6. Copy 000_LSZH_GSX_JWEXCL.BGL to Addon Manager/FSDreamTeam/Exclude/scenery
7. Run your FSDT GSX Control Panel and check that the bgl is up to date. if not, compile it
-
Hello
Which files are the AFCAD files?
Your AFCAD file is the LSZH_L14_S28_16.bgl correct?
Thank you
Greetings Dani
-
Yes my AFCAD is LSZH_L14_S28_16
-
UPDATE
NEW AFCAD included
Please Redownload AFCAD and lszhu61f6h again! UPDATED V2
UPDATE V3 includes UBS Logo on all Jetways Redownload only lszhu61f6h file
1. Delete all 3 AFCAD files from P3D V4/Ecosystem/Aerosoft/MegaAirportZuerichV4/Scenery
2. Copy the AFCAD file into the same folder
3. Delete LSZH_OBJ-Jetways & LSZH_LIB-Jetways (safe this files)
4. Copy the file lszhu61f6h to YouName/AppData/Roaming/Virtuali/GSX
5. Copy 000_LSZH_GSX_JWEXCL.XML to Addon Manager/FSDreamTeam/Exclude
6. Copy 000_LSZH_GSX_JWEXCL.BGL to Addon Manager/FSDreamTeam/Exclude/scenery
7. Run your FSDT GSX Control Panel and check that the bgl is up to date. if not, compile it
Works beautifully, thanks !!
-
UPDATE
NEW AFCAD included
Please Redownload AFCAD and lszhu61f6h again! UPDATED V2
UPDATE V3 includes UBS Logo on all Jetways Redownload only lszhu61f6h file
1. Delete all 3 AFCAD files from P3D V4/Ecosystem/Aerosoft/MegaAirportZuerichV4/Scenery
2. Copy the AFCAD file into the same folder
3. Delete LSZH_OBJ-Jetways & LSZH_LIB-Jetways (safe this files)
4. Copy the file lszhu61f6h to YouName/AppData/Roaming/Virtuali/GSX
5. Copy 000_LSZH_GSX_JWEXCL.XML to Addon Manager/FSDreamTeam/Exclude
6. Copy 000_LSZH_GSX_JWEXCL.BGL to Addon Manager/FSDreamTeam/Exclude/scenery
7. Run your FSDT GSX Control Panel and check that the bgl is up to date. if not, compile it
which 3 AFCAD files do I have to delete?
Greetings Dani
-
Installed / deinstalled the mentioned files just now. Tested PMDG 737 single Jetway and 777 double Jetway at gate E20. Works Flawless.
-
Did'nt work for me at any of the gates at all
-
Well the pics are best indicative of the problem.
-
Well the pics are best indicative of the problem.
I dont kniw whats the problem in your sim!
But you dont have the same jetways like me!
For all other users my files are working fine
-
Well the pics are best indicative of the problem.
I dont kniw whats the problem in your sim!
But you dont have the same jetways like me!
For all other users my files are working fine
Is your file for Aerosoft Zurich Professional or just Aerosoft Zurich V2?
-
These files are for the "Mega Airport Zürich V2.0 professional", at least they work on my side perfectly
-
These files are for the "Mega Airport Zürich V2.0 professional", at least they work on my side perfectly
Weird then how come the same set of files bring about such different outcomes.
-
Hi,
At first, I thank you for your work, I would be desperate.
But a little question: The second jetway at gate B38 and the third at gate E67 is missing. Is this problem only at me or general?
Regards
Joël
(http://up.picr.de/33818502un.jpg)
B38
(http://up.picr.de/33818519np.jpg)
E67
-
1. Delete all 3 AFCAD files from P3D V4/Ecosystem/Aerosoft/MegaAirportZuerichV4/Scenery
Thanks for your work.
Several people have asked numerous times the above question. Please detail which three files BY NAME need deleted.
Surely thats not so hard?
-
Norm, AS LSZH comes with 3 AFX files by default. Make sure none of the three is active...
-
The three files needed to be deleted from Prepar3D v4\ecosystem\Aerosoft\Mega Airport Zuerich V4 are:
LSZH_AFX-OP-NESW.bgl
LSZH_AFX-op-NWSW.bgl
LSZH_AFX-op-STD.bgl
For backup reasons, changing them from .bgl to .off will make the invisible to P3D and works the same as deleting them.
-
Weird then how come the same set of files bring about such different outcomes.
May be a stupid question but did you run the live update recently?
At the moment i let it run one time per day to be sure im not missing any update.
-
Weird then how come the same set of files bring about such different outcomes.
May be a stupid question but did you run the live update recently?
At the moment i let it run one time per day to be sure im not missing any update.
yes I did, but still the same result.
-
Hm...
Did you run P3Dv4 as admin?
Any virus scanner that may interfere into the process? i had to put couatl.exe to the exception list in the win10 defender because of this...
You also have the latest of all files and followed all instructions clearly?
Dont get me wrong. i dont think you are stupid or something. only making sure that any basic procedures are made before a bug report goes to virtuali
-
Thank you for sharing.
But Jetway is missing on A15 and no register in AFCAD File, could you maybe update this?
-
Thank you for sharing.
But Jetway is missing on A15 and no register in AFCAD File, could you maybe update this?
In an AFCAD, all original stands can never be opened. The planes are otherwise too close to each other.
So i cant open A15, because A13 and A17 are to close to A15
-
That's strange, because in my old Afcad the A15 was registered.
In the realife the are using A03/05/07/09/49/11/13/15/17/57 for A32X and CS100/300
No possibility to change it?
-
That's strange, because in my old Afcad the A15 was registered.
In the realife the are using A03/05/07/09/49/11/13/15/17/57 for A32X and CS100/300
No possibility to change it?
If I open A15, I have to close A53, because the wings of the ai traffic are in each other.
In Real Ops, both are open yes, but not on the same time..
-
That's strange, because in my old Afcad the A15 was registered.
In the realife the are using A03/05/07/09/49/11/13/15/17/57 for A32X and CS100/300
No possibility to change it?
If I open A15, I have to close A53, because the wings of the ai traffic are in each other.
In Real Ops, both are open yes, but not on the same time..
I n the normal operations the parking positions A 03, 05, 07, 09, 49, 11, 13, 15, 17, 57 and A 42, 44, 02, 04, 48, 08, 10 are open (almost all with broken lines). The other configuration is only for longhaul aircrafts. And since this is a schengen gate, longhaul aircrafts are rare at the A gates (yes I know, in the summerseason there are somtimes a330 and a340 on this positions for shorthaul flights).
Now you have to decide wich configuration you want. And at the B-Dock is the same.
(http://up.picr.de/33842373hy.jpg)
(http://up.picr.de/33842508wp.jpg)
(http://up.picr.de/33842514ua.jpg)
-
That's strange, because in my old Afcad the A15 was registered.
In the realife the are using A03/05/07/09/49/11/13/15/17/57 for A32X and CS100/300
No possibility to change it?
If I open A15, I have to close A53, because the wings of the ai traffic are in each other.
In Real Ops, both are open yes, but not on the same time..
I n the normal operations the parking positions A 03, 05, 07, 09, 49, 11, 13, 15, 17, 57 and A 42, 44, 02, 04, 48, 08, 10 are open (almost all with broken lines). The other configuration is only for longhaul aircrafts. And since this is a schengen gate, longhaul aircrafts are rare at the A gates (yes I know, in the summerseason there are somtimes a330 and a340 on this positions for shorthaul flights).
Now you have to decide wich configuration you want. And at the B-Dock is the same.
(http://up.picr.de/33842373hy.jpg)
(http://up.picr.de/33842508wp.jpg)
(http://up.picr.de/33842514ua.jpg)
Thank you for this Info!
My AFCAD basses, on the original from Aerosoft. Anyone who wants to make changes, can do this with ADE175.
In the original one, almost all with broken lines are closed.
If you want to add all with broken lines, you have to create new Parking positions.
-
It seems that modifying your AFCAD with ADE results in broken GSX assignments (no surprise). Do you know by chance if modifying the Gate assignments in GSX LvL2 will result in a modified AFCAD? Or what is the use of those entries?
-
That's strange, because in my old Afcad the A15 was registered.
In the realife the are using A03/05/07/09/49/11/13/15/17/57 for A32X and CS100/300
No possibility to change it?
If I open A15, I have to close A53, because the wings of the ai traffic are in each other.
In Real Ops, both are open yes, but not on the same time..
I n the normal operations the parking positions A 03, 05, 07, 09, 49, 11, 13, 15, 17, 57 and A 42, 44, 02, 04, 48, 08, 10 are open (almost all with broken lines). The other configuration is only for longhaul aircrafts. And since this is a schengen gate, longhaul aircrafts are rare at the A gates (yes I know, in the summerseason there are somtimes a330 and a340 on this positions for shorthaul flights).
Now you have to decide wich configuration you want. And at the B-Dock is the same.
(http://up.picr.de/33842373hy.jpg)
(http://up.picr.de/33842508wp.jpg)
(http://up.picr.de/33842514ua.jpg)
Thank you for this Info!
My AFCAD basses, on the original from Aerosoft. Anyone who wants to make changes, can do this with ADE175.
In the original one, almost all with broken lines are closed.
If you want to add all with broken lines, you have to create new Parking positions.
Understand. I have the ADE175 but honestly I have no idea how to use.
Maybe someone can help me, would be appreciated
-
Salü and hello again
After a long wait for the reply i have received a mail today with the data for the wingspan at LSZH.
A big thanks goes to the Airport Steering and Expert Operations Planning & Optimisation department
Attention, a lot of data ;D
https://docs.google.com/spreadsheets/d/1EN581Vma3shjHQYeswmUNb3SLSwAbkblV3mcv0HPqrM/edit?usp=sharing
Have fun!