FSDreamTeam forum

Products Support => GSX Support FSX/P3D => GSX Sharing area - Scenery Configs => Topic started by: SEN_SEI_SAN on June 15, 2017, 05:02:31 pm

Title: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: SEN_SEI_SAN on June 15, 2017, 05:02:31 pm
We are started project of settings for Japanese add-on scenery airports.
From volunteer of Japanese Flight Simmers.

[2019/11/17 JST update]
Rev15 released.

Includes for:

Download file in to the Github project page.
https://github.com/SEN-SEI-SAN/GSXAirportsSettingsJP/wiki

We are continue working to add more setting files.

Thank you.

Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: captain420 on August 27, 2017, 08:57:45 am
SenSai Thank you so much for doing this! :) This will make the airports operate more realistically now!
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: scotth6 on September 25, 2017, 11:09:53 am
Great work.  Thanks to everyone contributing to these GSX/airport update files.

Cheers,
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: p3dx3 on October 14, 2017, 09:01:17 pm
Quote from: SEN_SEI_SAN on June 15, 2017, 05:02:31 pm
We are started project of settings for Japanese add-on scenery airports.
From volunteer of Japanese Flight Simmers.

[2017/09/13 JST update]
Rev7 released.

Includes for:
  • LFA Memanbetsu RJCM
  • WingCreation RJSS
  • WingCreation RJAA (Finish construction. Without small aircraft parking.)
  • TechnoBrain FSAC RJTT 2
  • FS Scenery Atelier RJNT
  • WingCreation RJNS
  • Pacific Islands Simulation RJGG
  • TechnoBrain FSAC RJOO
  • TechnoBrain FSAC RJBB (Finished only Terminal 1 and 2. Continue construction.)
  • Flyer RJOA
  • GEGE RJFR
  • Aerosim RJFF
  • WingCreation RJFU
  • FS Scenery Atelier RJFM
  • LFA RJFK
  • Technobrain FSAC ROAH

Download file in to the Github project page.
https://github.com/SEN-SEI-SAN/GSXAirportsSettingsJP/wiki

We are continue working to add more setting files.

Thank you.



Thank you for the team's work
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: amm693 on May 17, 2018, 10:20:15 am
Request BDOaviation RJBB setting :)
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: mulgrave on November 20, 2018, 07:09:07 pm
Hi

Do They work with GSX2 ?

I tried RJGG, Chubu but I don't get any jetways with GSX2
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: SEN_SEI_SAN on December 02, 2018, 04:26:01 pm
Quote from: mulgrave on November 20, 2018, 07:09:07 pm
Hi

Do They work with GSX2 ?

I tried RJGG, Chubu but I don't get any jetways with GSX2

Today we are released rev13.
Include GSX Level2 Jetway settings in PIS RJGG.
Enjoy  ;)
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: Dimon on May 09, 2019, 02:10:52 pm
Quote from: SEN_SEI_SAN on December 02, 2018, 04:26:01 pm
Quote from: mulgrave on November 20, 2018, 07:09:07 pm
Hi

Do They work with GSX2 ?

I tried RJGG, Chubu but I don't get any jetways with GSX2

Today we are released rev13.
Include GSX Level2 Jetway settings in PIS RJGG.
Enjoy  ;)

Hello,

Which original files that interfere with GSX L2 the scenery should I remove?
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: yuyicheng1990 on July 25, 2019, 04:50:18 pm
Hi, thank you guys so much for the wonderful work! I have a few questions regarding the installation. From the manual provided, it says only to put the specific ini file into Virtuali/GSX, is there no need edit any of the bgl files in the RJCC scenery folder? Because after I moved RJCC.ini into virtuali and start P3D, it was still the original jetway, one static and one moving by default ctr-J. Please help.
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: SEN_SEI_SAN on November 17, 2019, 12:22:51 pm
Quote from: Dimon on May 09, 2019, 02:10:52 pm

Hello,

Which original files that interfere with GSX L2 the scenery should I remove?

Hello, Dimon.

I'm apologize for too later reply.
Please remove for these files.
rjggjetbr.bgl
rjggjetbr21.bgl
rjggjetbrlg.bgl
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: SEN_SEI_SAN on November 17, 2019, 01:06:35 pm
Quote from: yuyicheng1990 on July 25, 2019, 04:50:18 pm
Hi, thank you guys so much for the wonderful work! I have a few questions regarding the installation. From the manual provided, it says only to put the specific ini file into Virtuali/GSX, is there no need edit any of the bgl files in the RJCC scenery folder? Because after I moved RJCC.ini into virtuali and start P3D, it was still the original jetway, one static and one moving by default ctr-J. Please help.

Hello, Yuyicheng.

I'm apologize for too later reply.
Is my understanding, Conflict RJCJ problem is fixed in newest TechnoBrain RJCC scenery version.
But if continued this problem, Please trying edit to RJCJ bgl file.
(See these procedure. But cannot guarantee to completely fix.)

1. In ADE, open RJCJ_ADEX_TB.bgl
2. Go to "File" -> "Properties"
3. Using "Set by Drag", moving "Location" to about 10km west.
4. Compiling bgl. (remember bgl backup)
 
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: xcc99 on April 14, 2020, 06:21:55 am
Quote from: yuyicheng1990 on July 25, 2019, 04:50:18 pm
Hi, thank you guys so much for the wonderful work! I have a few questions regarding the installation. From the manual provided, it says only to put the specific ini file into Virtuali/GSX, is there no need edit any of the bgl files in the RJCC scenery folder? Because after I moved RJCC.ini into virtuali and start P3D, it was still the original jetway, one static and one moving by default ctr-J. Please help.

By looking into the .ini files they have provided it does not come with GSX2 jetways. Only vehicle and parking positions
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: amm693 on May 23, 2020, 08:49:14 pm
Will you also implement the livery/logo of catering trucks?
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: Drebing on June 07, 2020, 01:20:21 pm
Thanks for sharing this!

Best regards,
Drebing
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: trisho0 on September 28, 2020, 04:13:04 pm
Great wonderful art work for Japanese sceneries. Congrats!
Where to find RJBE (Kobe Airport) GSX2 files?
Regards,
Patricio
Title: Re: GSXAirportsSettingsJP - Project of settings for Japanese add-on scenery airports
Post by: trisho0 on May 12, 2021, 04:24:33 am
What files from Technobrain RJBB scenery need to be Off in order to let jetways working with GSX ini file?
Patricio