FSDreamTeam forum

Products Support => GSX Support FSX/P3D => Topic started by: bugman38313 on August 31, 2013, 06:55:35 pm

Title: Ifly update to 737NG
Post by: bugman38313 on August 31, 2013, 06:55:35 pm

Hello,

   Ifly has updated their 737NG to add more procedure to the bird.  One of the true to life procedures is you don't have brakes until hydraulics have been fired up.  I also use FScrew with this program and when it goes through its true to life check list, the hydraulics are not turned on past the time that I need to load passengers.  So now when I fire up my GSX load passengers it says the parking break is not on.  It seem looking at true check list the hydraulics come on line exactly as fscrew simulates.  Due to this procedure, I can't load my passengers.  Any one come up against this using Ifly 737NG and what can be done to make these three work together all the way through.  Any suggestions please?

Thank you
David Hawley

Title: Re: Ifly update to 737NG
Post by: Eisbahn on August 31, 2013, 07:23:08 pm

You still have the parking brake even when there are no hydraulics.
See the following article from "Smart Cockpit"

www.smartcockpit.com/download.php?path=docs/&file=B_NG-Landing_Gear.pdf

Title: Re: Ifly update to 737NG
Post by: bugman38313 on September 01, 2013, 09:22:16 pm

well then something is wrong because the brakes do not come on until the hydraulics are turned on.  Fs crew turns on the hydraulics A and then later before startup it turns on B  when B comes online then the brakes come on.  The hydraulic dial on the panel are in read even with A on.

I have tried to contact Ifly team no reply yet.

David