FSDreamTeam forum
General Category => General Discussion => Topic started by: pcubine on February 19, 2012, 03:14:10 pm
-
Umberto
In several weeks I will be installing around 7 FSDT airports onto a new computer. I did this about a year ago and it seems like I was downloading and installing the Stand Alone Manager forever to get these airports to work right. Can the Stand Alone Manager be downloaded and installed and the serial numbers entered for each airport once the installers for all airports have been run?
Thank you
Michael Cubine
-
If you deactivate them from the old computer first, it will generate .reg files for each scenery. Just copy those to the new computer and run them to reactivate.
-
Bruce
I don't want to copy anything from the old to new computer. Once the hardware is setup I will install Windows7. FSX and then start to install addons.
Michael Cubine
-
I don't want to copy anything from the old to new computer.
You don't have to.
Those .REG file don't do anything special: they are just a shortcut to save you from the hassle of manually typing your Serial Number when you'll have to register on the new computer, that's it, they don't have any other purpose, you can lose them without any consequences.
-
Bruce and Umberto
I see the files and will copy before uninstalling airports and paste after installing.
Thanks
Michael Cubine
-
I installed KJFK and KDFW on a third computer which has FSX on it. The reg files from the previous installaton were copied and pasted from the first computer. I installed KJFK. It came up in the trial version mode. When I atttempted to register it I received a message the Stand Alone Manager was out of date. Downloaded and installed the manager and completed the registration. Five minutes later installed KDFW. Same deal as with KJFK. Trial version, try to register, download manager is out of date, download manager, install, complete registration. SOS as the last time I did a reinstall of FSX and addons a year ago. How can a Stand Alone Manager be out of date in five minutes?
Michael Cubine
-
How can a Stand Alone Manager be out of date in five minutes?
The Addon Manager should be installed AFTER all the sceneries, and only once, there's no need to keep reinstalling it after every scenery, it's enough to install it once, but after all the sceneries.
-
Another trick when reinstalling that many sceneries is download all the installers first, then unplug your internet connection until you install the sceneries, then plug it back in for the stand alone addon manager. Without that connection, it can't retrieve all those files off the server every time and installation runs faster.
-
How can a Stand Alone Manager be out of date in five minutes?
The Addon Manager should be installed AFTER all the sceneries, and only once, there's no need to keep reinstalling it after every scenery, it's enough to install it once, but after all the sceneries.
Umberto
Here is good one for you. Tonight I decided to install KLAX and KORD and then the Stand Alone Manager and register the airports in the windowed mode. The boxes requesting that I trust never appeared. But I pressed on with the installation. When I pressed fly now the progress bar showing the loading of the flight went to 100% and then the screen went blank. After several attemtpts with no better results I uninstalled KLAX and KORD using Control Panel\Programs and features and answered yes to uninstall Stand Alone Manager and Coult Engine. Still a blank screen. Then I uninstalled KJFK and KDFW figuring if there were no FSDT airports on the computer FSX would work. It does because I get the splash screen and all the other screens like free flight, settings, learning center, etc. The screen just goes blank after I press free flight and it loads, I can also quit a flight by pressing the Esc button and clicking on end flight. I just have a blank screen after the flight loads and before I click on end flight. Any ideas on what the problem might me?
Thank you
Michael Cubine
I just thought of another question. Should I be installing the original installer that coud have been downloaded anywhere from six months to two years ago or should I download and install the airports from the FSDT website?
-
I uninstalled KLAX and KORD using Control Panel\Programs and features and answered yes to uninstall Stand Alone Manager and Coult Engine. Still a blank screen
That's the end of the story: if you really answered yes to uninstall Stand Alone Manager and Coult Engine, and FSX still doesn't load, it's absolutely sure your problem doesn't have anything to do with anything made by us. That uninstall IS really a clean uninstall.
Any ideas on what the problem might me?
Apart for now being sure it's nothing related to FSDT products, no.
I just thought of another question. Should I be installing the original installer that coud have been downloaded anywhere from six months to two years ago or should I download and install the airports from the FSDT website?
As explained many times, if you don't want to redownload all the scenery installers, be sure to always install the Stand-Alone Addon Manager AFTER all the sceneries has been installed.
-
Apart for now being sure it's nothing related to FSDT products, no.
Umberto
I didn't think it was related to FSDT products and it wasn't. It had to do with switching from a 1920x1200 monitor to 1920x1080 and not changing the value in fsx.cfg. JFK, ORD, DFW, and LAX have been installed and then the Stand Alone Manager and the products registered. HOWEVER, LAX only has jetways - no terminals. The other three airports seem allright.
Michael Cubine
-
As I've said in my previous message:
install the Stand-Alone Addon Manager AFTER all the sceneries has been installed.
Have you done that ?
-
Yes. It was installed after installation of airports.
Michael Cubine
-
Do you have both the Addon Manager and the Couatl menus under the FSX Addons menu ?
-
Do you have both the Addon Manager and the Couatl menus under the FSX Addons menu ?
Umberto
Yes. Both are under Addons menu in FSX.
Michael Cubine
-
Sorry but, if the Addon Manager and the Couatl menus are there and they are the most current version (they surely are, if you installed the Stand-Alone Addon Manager as last), it means everything is working and the sceneries must work, provided of course they *are* installed.
If they don't, then the problem must be something else entirely, check the antivirus for example, that is not blocking the installation of the current version of both Couatl/Addon Mananger, so you are still getting an older version for some reason.
The current version of the Addon Manager is 2.9.0.1 and Coatl it's 2.0.0.2098. If they are both running (their menus are visible) and the sceneries are installed and *are* the current version too, it MUST work, plain and simple.
-
Umberto
The computer I mentioned in the original post is here now. The wireless card is shot on it. So I can't get on the Internet. The computer quit about 7/8 of the way thru installing megaSceneryX-Socal. So an imcomplete KLAX on my compurter #3 is the least of my worries right now. If I have any issues concerning FSDT airports on the updated computer I will start a new topic. BTW the antivirus is Microsoft Security Essentials which I think you recommended back in August 2010 to replace the Norton I was using at the time.
Thanks
Michael Cubine
-
I'm sorry, but I can't keep track of all your systems, just discuss only the one that doesn't work. Does it have its internet connection working ?
-
I'm sorry, but I can't keep track of all your systems, just discuss only the one that doesn't work. Does it have its internet connection working ?
Umberto
Put in a new wireless card and it is working. Hopefully I will get SoCal squared away today and then start installing FSDT airports.
Michael Cubine