FSDreamTeam forum
Products Support => Chicago O'Hare for FSX/P3D => Topic started by: ryanbatcund on April 23, 2011, 08:01:52 pm
-
I've been receiving g3d.dll errors while flying to ORD from somewhere else. The crash normally occurs when I'm at the range where the scenery loads, but FSX just hangs at this point.
Yet it loads fine if my flight starts at Ohare. This crash scenario also happens at JFK.
I've updated my video drivers, etc, PC is stable.
FSX Acceleration
Win7 x64 SP1
Problem signature:
Problem Event Name: APPCRASH
Application Name: fsx.exe
Application Version: 10.0.61637.0
Application Timestamp: 46fadb14
Fault Module Name: g3d.dll
Fault Module Version: 10.0.61637.0
Fault Module Timestamp: 46fadb58
Exception Code: c0000005
Exception Offset: 000ba79f
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
LCID: 1033
-
I'd put my money on a corrupted AI-plane texture.
Try to fly in with AI-traffic turned off.
If nothing happens - Happy searching the bugger ::)
Happy Landings
Juergen
-
Naw, I'm using default AI traffic.
Could be anything.... stupid Windows 7 - never had more problems with an OS!
-
Are you able to pinpoint a distance, even approximate, from KORD airport center reference point the crash happen ?
-
I have been having the same issue for months. Couldn't find anything specific after troubleshooting. For me it happens about 25 miles out.
-
For me it happens about 25 miles out.
Ok, that safely discounts our KORD airport, since its loading range it's exactly 10.0 nm, nothing of it is loaded before that distance. It's either a problem with an AI, or with another addon for that area, like a terrain addon.
-
I am also having problem flying to KORD. I have tried 3 times from KJFK and FSX CTD when in area of Chicago/ILL. Once it happened about 75 miles out and another on approach. I will deactivate scenery and try again. Here are the results I always receive:
Problem signature:
Problem Event Name: APPCRASH
Application Name: fsx.exe
Application Version: 10.0.61637.0
Application Timestamp: 46fadb14
Fault Module Name: g3d.dll
Fault Module Version: 10.0.61637.0
Fault Module Timestamp: 46fadb58
Exception Code: c0000005
Exception Offset: 000ba79f
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
LCID: 1033
=====================================================================================
Problem signature:
Problem Event Name: APPCRASH
Application Name: fsx.exe
Application Version: 10.0.61637.0
Application Timestamp: 46fadb14
Fault Module Name: g3d.dll
Fault Module Version: 10.0.61637.0
Fault Module Timestamp: 46fadb58
Exception Code: c0000005
Exception Offset: 000ba79f
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
LCID: 1033
wb2002
ASUS P6X58 Premium/Intel i7-930 OC TO 4.2
Mushkin Redline (3x2GB) 6-8-6-24/Win 7 Ultimate 64
2x150GB SATA WD Raptor-No Raid/2x320GB SATA WD SE16-No Raid
2x SATA DRW-24B1ST/EVGA GTX285 2Gigs/Thermaltake W0106 700W PSU
3x SILENX 120X25MM FANS + 2x 10in XCLIO Wind Tunnel Case Fans
Danger Den Water Cooling/Enermax temp/fan controller
FSX + ACC @ 1920/1080 |UTX/GEX/FEX/REX/MTX/ASE/UT2/ESDG CX20X/PMDG747+EXT8/CS-767/CLS MD81-82/SkySIM D-C9/RC-4/FSGenesis/DBS-WAF/FollowMe/Grnd X Traffic/ORBX FTX NA BLUE/
-
I am also having problem flying to KORD. I have tried 3 times from KJFK and FSX CTD when in area of Chicago/ILL. Once it happened about 75 miles out and another on approach.
I repeat and confirm, that safely discounts our KORD airport, since its loading range it's exactly 10.0 nm, nothing of it is loaded before that distance. It's either a problem with an AI, or with another addon for that area, like a terrain addon. Fact that it happened once on approach, can simply indicate a problematic AI (if AI is the problem) was closer that time.
Even if you disable the scenery and the problem will not happen, that will not prove the problem was caused by the airport because, if you disable it, another AFCAD (probably the default one) will take place, which will call a different set of AI, or just *less* AI.
-
I've been getting this again. Try this... fly around some random area far away from KORD, like NY state. Then go to KORD. Mine CTD's when the loading bar starts to load scenery.
This has nothing to do with AI or afcads! I don't have any other AI (heck it's not even turned on), and the only afcad I would ever have is default. Are you saying by installing FSDT scenery it doesn't replace the default acfad? It should...
Anyway is it possible that installing newer scenery is making these errors? Files conflicting? I just installed your KDFW and KLAS and that's when I started getting the errors again.
So here's your FSDT folder, and the bgls... any look odd or out of date? (not pictured is the last number 14 and KORD_sf.bgl)
The only other KORD bgl I have is default, but there is the default chicago.bgl scenery in Microsoft Flight Simulator X\Scenery\NAMC - perhaps that's the conflicting file?
http://i141.photobucket.com/albums/r43/ryanbatc/Untitled1-7.jpg (http://i141.photobucket.com/albums/r43/ryanbatc/Untitled1-7.jpg)
-
I've been getting this again. Try this... fly around some random area far away from KORD, like NY state. Then go to KORD. Mine CTD's when the loading bar starts to load scenery.
If you are getting a crash when loading scenery, then it's fairly sure it's NOT the airport, but it's a problem with the other terrain around. Our sceneries (at least, 90% of the objects) load AFTER the loading bar, because are not in the BGL files.
This has nothing to do with AI or afcads! I don't have any other AI (heck it's not even turned on), and the only afcad I would ever have is default.
AI could be the most *common* cause of a crash, but that doesn't mean it's the only one. The 2nd most common cause, it's the VTP scenery around. For example, here's a post of an user that, like you, initially believed our KJFK was the cause of its crashes, but it turned out to be Ultimate Terrain in his case:
http://www.flightsim.com/vbfs/showthread.php?195815-My-Out-Of-Memory-Error-Solution
Are you saying by installing FSDT scenery it doesn't replace the default acfad? It should...
First, it shouldn't, since it's plainly wrong to "replace" the default AFCAD. If you have ONLY the default AFCAD, our will TAKE PRECEDENCE over it, provided of course you left KFJK on a highest scenery layer, which is where its installer puts it by default.
I was saying an entirely different thing about the AFCAD: If the problem WAS related to an AI, you might get the wrong impression of being related to the scenery, because it *might* disappear when uninstalling the JFK airport BECAUSE, in that case the default AFCAD would become active, and it would recall a different set of AI, perhaps not calling the problematic one. That was just an EXAMPLE, in case you'll end up thinking "I've removed the scenery, the crash doesn't happen anymore, so it was the scenery", which is not always the case, if you don't know the whole implications of removing a scenery in relationship to AIs
Anyway is it possible that installing newer scenery is making these errors? Files conflicting? I just installed your KDFW and KLAS and that's when I started getting the errors again.
It's impossible that installing KDFW and KLAS would create a conflict at KORD. If you mix-match Addon Manager version, either you FSX will not start correctly, or the sceneries will not display at all.
In any case, I'll repeat it again:
- The scenery has a range of exactly 10 nm. Any crash happening farther than this, it's guaranteed not be caused by the airport.
- Most of the 3d objects are NOT loaded during the "Loading scenery" progress bar, but they load only AFTER the screen has gone back to normal flying. In fact, there's also a small delay, which means any crash that happens on the progress bar, it's unlikely caused by the airport.
If you can recall *exactly* at which stage of the progress bar the crash happened, it might help understanding which kind of data was being loaded at that time.
-
Umberto, Thanks for your info. I tend to agree with you that the problem is not caused by KORD scenery however, I would appreciate if you would let this thread continue for a while so that we may find the reason for our mutual problem. I am trying other possible solutions and would like to have a common place to report any success I may have with this.
wb2002
ASUS P6X58 Premium/Intel i7-930 OC TO 4.2
Mushkin Redline (3x2GB) 6-8-6-24/Win 7 Ultimate 64
2x150GB SATA WD Raptor-No Raid/2x1TB SATA WD ST31000524AS-No Raid
2x SATA DRW-24B1ST/EVGA GTX285 2Gigs/Thermaltake W0106 700W PSU
3x SILENX 120X25MM FANS + 2x 10in XCLIO Wind Tunnel Case Fans
Danger Den Water Cooling/Enermax temp/fan controller
FSX + ACC @ 1920/1080 |UTX/GEX/FEX/REX/MTX/ASE/UT2/ESDG CX20X/PMDG747+EXT8/CS-767/CLS MD81-82/SkySIM D-C9/RC-4/FSGenesis/DBS-WAF/FollowMe/Grnd X Traffic/ORBX FTX NA BLUE/
-
If you are getting a crash when loading scenery, then it's fairly sure it's NOT the airport, but it's a problem with the other terrain around. Our sceneries (at least, 90% of the objects) load AFTER the loading bar, because are not in the BGL files.
I just don't see why it couldn't be KORD... I'm selecting KORD as the place to go to and it crashes. It never crashes when I go anywhere else, just ORD. It's has to be some conflict with the scenery. I'll look at my folders again to find any irregularities.
I also thought of something just a moment ago. Does any part of your scenery or the manager run in the Users folder? Win7 is super finicky about file permissions and maybe that's causing a problem? Example: C:\Users\myusername\AppData\Roaming
-
Happy News - at least, for me. For some time I have experienced CTD on flights from KMSY to KJFK or some other place heading east. When I tried from east going west (KJFK to KORD), I got CTD on 3 occasions. I even reinstalled KORD but, no change. After entertaining the idea that maybe it could be some other terrain files, I disabled UTX - under the "TERRAIN" tab, there is an option for "Quick Ultimate Terrain Enable/Disable". After disable, I tried flight from KJFK to KORD again. Upon entering the TOD for KORD, the weather was horrible. Visibility was only 6 miles, and it was raining. It was a demanding time for my CPU, memory and video card. Nevertheless, I safely landed on rwy 14L and taxied to gate, without any CTD's. Now I need to find out what I need to do about UTX - uninstall, reinstall or what?
I wish there was a software routine that ran as part of an program installation to insure the checksums of all the files installed with that addon. At least you would know if all the files were installed to the disk correctly.
For any that maybe having this ghost of a problem, try disabling UTX and try flight again and pls let us know if it worked.
wb2002
ASUS P6X58 Premium/Intel i7-930 OC TO 4.2
Mushkin Redline (3x2GB) 6-8-6-24/Win 7 Ultimate 64
2x150GB SATA WD Raptor-No Raid/2x1TB SATA WD ST31000524AS-No Raid
2x SATA DRW-24B1ST/EVGA GTX285 2Gigs/Thermaltake W0106 700W PSU
3x SILENX 120X25MM FANS + 2x 10in XCLIO Wind Tunnel Case Fans
Danger Den Water Cooling/Enermax temp/fan controller
FSX + ACC @ 1920/1080 |UTX/GEX/FEX/REX/MTX/ASE/UT2/ESDG CX20X/PMDG747+EXT8/CS-767/CLS MD81-82/SkySIM D-C9/RC-4/FSGenesis/DBS-WAF/FollowMe/Grnd X Traffic/ORBX FTX NA BLUE/
-
I just don't see why it couldn't be KORD... I'm selecting KORD as the place to go to and it crashes. It never crashes when I go anywhere else, just ORD
When you are in the KORD area, there's a LOT of other sceneries loaded, apart for our KORD!! The terrain you see around comes from the default scenery and, if you have addons like 3rd party meshes, 3rd party VTP terrain addons, 3rd party photoreal addons, they are all loaded.
If one of these sceneries has a problem in the KORD area, the result would be exactly like you are describing: a crash ONLY in the KORD area, which makes you think the problem it's the airport, when it's not.
If you read the message in the link I've posted on flightsim.com, there was another user that, just like you, initially believed there was a problem with JFK, because he had a crash ONLY at JFK. Turned out to be Ultimate Terrain X
And, if you read the below message from wb2002, he also had a crash at KORD, just like you, and it seems to be fixed by turning off, guess what, Ultimate Terrain X...
-
That's funny cause I don't seem to have any problem in the Chicago area, and I'm running all sort of different paywares. Besides FSDT KORD, I have FlyTampa's Midway, US CITIES Chicago, UTUSA, REX, and GEX. I fly in real weather, and most of the time it's terrible. But I never had a CTD even when flying heavies like the 747 or Airbus. Perhaps I should try harder to see if I can crash! :o
-
Don't know if you have solved your problem but my is. I removed UTX and everything associated with it and did new install from fresh new download. Previous install was from scratch (beginning + every update). Latest install required only 2 installs. Perhaps over the many months of defrags, updates and etc, something got corrupted enough to cause my problem. I do not know what problem was but everything is fine now. If you still having problems, let us know.
wb2002
ASUS P6X58 Premium/Intel i7-930 OC TO 4.2
Mushkin Redline (3x2GB) 6-8-6-24/Win 7 Ultimate 64
2x150GB SATA WD Raptor-No Raid/2x1TB SATA WD ST31000524AS-No Raid
2x SATA DRW-24B1ST/EVGA GTX285 2Gigs/Thermaltake W0106 700W PSU
3x SILENX 120X25MM FANS + 2x 10in XCLIO Wind Tunnel Case Fans
Danger Den Water Cooling/Enermax temp/fan controllerFSX + ACC @ 1920/1080 |UTX/GEX/FEX/REX/MTX/ASE/UT2/ESDG CX20X/PMDG747+EXT8/CS-767/CLS MD81-82/SkySIM D-C9/RC-4/FSGenesis/DBS-WAF/FollowMe/Grnd X Traffic/ORBX FTX NA BLUE/
-
Good evening...
A longer time ago I was flown the Level-D into KORD and at about 5000ft, short before the FAF, I got a CTD, I thougt it would happen only once. But a few days ago, I flew with the NGX from KBUF (FlyTampas+US Cities Niagara Falls) to Fly Tampas Midway which I've bought a few minutes earlier and on the ILS of Midway I got another CTD. I did the flight once again to see if I can reproduce that bug and what shall I say, I got my CTD. The next try was with US Cities X off, and I won another CTD. The 4th flight was with KORD off and it works, I finally landed at Midway.
What have I done, I made a deinstallation, downloaded the KORD Installer new and installed it. I guess I have it, but once again with KORD activated, I get the next CTD... I was not much away from throwing the computer out of the window, cause it's pretty boring flying the same flight ever and ever...
So tommorow I will switch off the AI Traffic and will give it another try, or is it really Ultimate Terrain X USA? I don't want to deinstall and reinstall it cause I'm a bit affraid of destroying something like the textures in Europe from Ultimate Terrain Europe, or maybe Ground Environment will run into some troubles?
At present for the KORD area I've installed:
- FS Global 2008
- Ultimate Terrain USA X
- Ground Environment X
- US Cities X - Chicago
- FSDT O'hare
- FlyTampas Midway
- and the Ultimate Traffic 2 with 50% AI Traffic
-
Ok, I did the next try with AI Traffic off and on the ILS 31C on 1000ft I got my CTD. I've tuned the ORD VOR on Nav2 and I was 16.9nm away from the VOR when the CTD happens.
So, Umberto, you said that this could not have something 2 do with ya KORD, but why did everything went fine when I switch KORD off? It must have something 2 do with that. For now I've testet all the stuff I could test.
A strange thing is, that when I will start in the Chicago Area nothing happens, only when I fly into from anywhere else I got the crash. For now, I switch KORD off.
-
I was 16.9nm away from the VOR when the CTD happens.. So, Umberto, you said that this could not have something 2 do with ya KORD, but why did everything went fine when I switch KORD off?
That distance readout proves it's nothing related to the scenery, KORD loading range is exactly 10.0 NM for the main objects, with lots of objects having smaller ranges.
For now I've testet all the stuff I could test.
No, you haven't, you just tried turning AI off, but your own list of addons in the area is quite long as, as you can see from another user post, he stopped having crashes when he removed UTX and reinstalled everything.
A strange thing is, that when I will start in the Chicago Area nothing happens, only when I fly into from anywhere else I got the crash.
This proves even more clearly the airport is not the problem, since the crash is happening when coming from elsewhere,
before even the scenery loads, and it's not happening when you go directly to the airport which means, what is making the sim crash, is not the airport, but something else that is loaded before it, and might *not* load when you are AT the airport.
-
Just to be sure, I've just flown a test flight from Champaign to KORD, trying to follow your route, with no problems at all, using default A321, default AI traffic. Only addon installed other than KORD it's X-Class USA.
-
Hmmm, like I wrote, I'm a bit affraid of reinstalling UTX... :(
I'll post my story in their forum, maybe they can produce a hotfix?
-
I'll post my story in their forum, maybe they can produce a hotfix?
You should at least first trying a flight without UTX, and see if the problem is solved.
-
That is an idea, yes. I'll give it a try tomorrow.
-
Hi and sorry for the late answer, I've had a litte less time in the past few days.
Today I made another 2 flights, here are the results.
I've edited my fsx.cfg and turned down a few settings and I've visited Bojotes site and looked for some tweaks. I made the first try and have the frames on to see if the computer will have any problems, but nothing 20 frames and more on the ILS 31C KMDW. 17nm away of ORD VOR, I got my good damn CTD. I guess, 20 frames must be enough and shows that my system has no problem in handling the scenerys. Other scenerys like KJFK (FSDT) in combination with Manhattan X (Aerosoft), or KLAS (FSDT) with US Cities X - Las Vegas (Aerosoft) or even KSFO (Flightbeam) with US Cities X - Frisco (Aerosoft) are running well. So I won't believe that my system can't handle the workflow.
The second unmarked all Ultimate Terrain Entrys I've found in the scenery library and again, at exactly 17nm away of KORD I've get my CTD...
When I turn off FSDT, all is fine... So I've let it off now until someone find the failure.
Here is my new fsx.cfg and I'll show you my scenery.cfg, maybe there is a failure in the sorting of the layers?
fsx.cfg:
[AContain]
LabelColor=FFFF0000
LabelDelay=2000
ShowLabelAirline=0
ShowLabelAirlineAndFlightNumber=1
ShowLabelAirspeed=0
ShowLabelAltitude=1
ShowLabelContainerId=0
ShowLabelDistance=1
ShowLabelFlightPlan=1
ShowLabelHeading=0
ShowLabelManufacturer=1
ShowLabelModel=1
ShowLabels=1
ShowLabelTailNumber=0
ShowUserLabel=0
[ATC]
AutoOpenAirTrafficWindow=0
COMM_MSG_AI_ATC_COLOR=FFFF7840
COMM_MSG_ATC_AI_COLOR=FF00FF00
COMM_MSG_ATC_USER_COLOR=FFB6FFB6
COMM_MSG_NONE_COLOR=FFFFFFFF
COMM_MSG_USER_ATC_COLOR=FFFFD21B
PilotVoice=0
ShowATCText=0
UsePilotVoice=0
[CONTROLS]
Controls_Current=Standard
Controls_Default=Standard
KBDAIL=64
KBDELEV=64
KBDRUD=64
[Display]
ActiveWindowTitleBackGroundColor=0,28,140,64
ActiveWindowTitleTextColor=255,255,255
BLOOM_EFFECTS=0
ChangeTime=2.000000
InfoBrakesEnable=False
InfoLowerLeftBackGroundColor=255,0,0,128
InfoLowerLeftTextColor=255,255,255
InfoLowerRightBackGroundColor=255,0,0,128
InfoLowerRightTextColor=255,255,255
InfoOverspeedEnable=False
InfoParkingBrakesEnable=False
InfoPauseEnable=True
InfoSlewEnable=True
InfoStallEnable=False
InfoUpperRightBackGroundColor=0,0,0,0
InfoUpperRightTextColor=255,0,0
NonActiveWindowTitleBackGroundColor=24,33,87,64
NonActiveWindowTitleTextColor=255,255,255
SKINNED_ANIMATIONS=1
TEXTURE_BANDWIDTH_MULT=40
TextureMaxLoad=30 //neu rein gekommen
TransitionTime=2.000000
UPPER_FRAMERATE_LIMIT=0
WideViewAspect=True
[DISPLAY.Device.NVIDIA GeForce GTX 570.0]
Anisotropic=1
Mode=1920x1080x32
[DynamicHeadMovement]
HeadMoveTimeConstant=1.000000
LonAccelOnHeadLon=-0.020000
LonAccelOnHeadPitch=-0.010000
MaxHeadAngle=5.000000
MaxHeadOffset=0.300000
RollAccelOnHeadLat=0.010000
RollAccelOnHeadRoll=0.100000
YawAccelOnHeadLat=-0.100000
[FACILITIES]
CITY=
COUNTRY=
GTL_BUTTON=1242
STATE=
[GRAPHICS]
ALLOW_SHADER_30=1 //Shader 3
AC_SELF_SHADOW=1
AIRCRAFT_REFLECTIONS=1
AIRCRAFT_SHADOWS=0
COCKPIT_HIGH_LOD=1
D3D10=0
EFFECTS_QUALITY=2
ForceFullScreenVSync=0 //schaltet VSync im Fullscreen ab
ForceWindowedVSync=0 //schaltet VSync im Window aus
GROUND_SHADOWS=0
HIGHMEMFIX=1
IMAGE_QUALITY=0
LANDING_LIGHTS=1
NUM_LIGHTS=8
See_Self=1
SHADER_CACHE_PRIMED=1693458443
SHADER_CACHE_PRIMED_10=1693458443
SHADER_CACHE_VERSION=11
TEXTURE_MAX_LOAD=4096
TEXTURE_QUALITY=3
Text_Scroll=1
[INTERNATIONAL]
ASLAT=2
ASLON=1
MEASURE=1
[Main]
DisablePreload=1
HideMenuFullscreen=1
HideMenuNormal=0
Location=0,0,1920,1080,\\.\DISPLAY1
Maximized=2
PerfBucket=7
ProcSpeed=14596
SimObjectPaths.0=SimObjects\Airplanes
SimObjectPaths.1=SimObjects\Rotorcraft
SimObjectPaths.2=SimObjects\GroundVehicles
SimObjectPaths.3=SimObjects\Boats
SimObjectPaths.4=SimObjects\Animals
SimObjectPaths.5=SimObjects\Misc
SimObjectPaths.6=SimObjects\UT2 Aircraft
SimObjectPaths.7=SimObjects\IVAO_MTL
User Objects=Airplane, Helicopter
[Misc]
Com_Rate=7
[PANELS]
DEFAULT_VIEW=0
IMAGE_QUALITY=1
PANEL_MASKING=1
PANEL_OPACITY=100
PANEL_STRETCHING=1
QUICKTIPS=1
UNITS_OF_MEASURE=1
[PointOfInterestSystem]
CycleSetting=0
[REALISM]
AutoCoord=False
AutoTrim=False
CrashDetection=False
CrashTolerance=1.000000
CrashWithDyn=False
GEffect=False
General=1.000000
GyroDrift=False
GyroEffect=1.000000
ManualLights=True
PFactor=1.000000
RealMixture=True
StressDamage=False
Torque=1.000000
TrueAirspeed=False
UnlimitedFuel=False
[SCENERY]
DAWN_DUSK_SMOOTHING=1
IMAGE_COMPLEXITY=5
LENSFLARE=1
MAX_ASYNC_BATCHING_JOBS=3 //neu rein gekommen
[SIM]
SYSCLOCK=1
[SlewTextInfo.1]
AirSpeed=1,5
Altitude=1,3
Heading=1,4
Latitude=1,1
Longitude=1,2
[SlewTextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
[SlewTextInfo.3]
AirSpeed=1,5
Altitude=1,3
FrameRate=2,1
Heading=1,4
Latitude=1,1
LockedFrameRate=2,2
Longitude=1,2
[SOUND]
AmbientUIMusicVolume=-6.000000
PrimaryDevice={DEF00000-9C6D-47ED-AAF1-4DDA8F2B5C03}
VoiceDevice={DEF00002-9C6D-47ED-AAF1-4DDA8F2B5C03}
SOUND=1
SOUND_QUALITY=2
SOUND_LOD=0
UISound=1
AmbientUI=0
SOUND_FADER1=0.500000
SOUND_FADER2=0.500000
SOUND_FADER3=0.500000
SOUND_FADER4=-0.000000
AmbientUIMusic=FSX01
[STARTUP]
DEMO=0
LoadWindow=1
SHOW_OPENING_SCREEN=1
STARTUP_DEMO=
[TERRAIN]
AUTOGEN_DENSITY=4
DETAIL_TEXTURE=1
LOD_RADIUS=4.500000
MESH_COMPLEXITY=100
MESH_RESOLUTION=23
TEXTURE_RESOLUTION=27
WATER_EFFECTS=3
SWAP_WAIT_TIMEOUT=2 //neu rein gekommen
[TextInfo.1]
AirSpeed=1,5
Altitude=1,3
Heading=1,4
Latitude=1,1
Longitude=1,2
WindDirectionAndSpeed=1,6
[TextInfo.2]
AverageFrameRate=1,2
FrameRate=1,1
FuelPercentage=1,4
GForce=1,3
LockedFrameRate=
[TextInfo.3]
AirSpeed=1,5
Altitude=1,3
AverageFrameRate=2,2
FrameRate=2,1
FuelPercentage=2,4
GForce=2,3
Heading=1,4
Latitude=1,1
LockedFrameRate=
Longitude=1,2
WindDirectionAndSpeed=1,6
[TrafficManager]
AirlineDensity=0
AIRPORT_SCENERY_DENSITY=3
FreewayDensity=20
GADensity=0
IFROnly=0
LeisureBoatsDensity=30
ShipsAndFerriesDensity=50
[Trusted]
F:\FSX\bglmanx.dll.hierqzztccrnoennzoaczibztiobzecqucqkbaci=1
F:\FSX\bglmanx.dll.qqlahbrwnhwbiirqcaawinlhonwhceunethqqieu=1
F:\FSX\fsdreamteam\couatl\couatl.exe.unzbrinchtqlntrnlottzncouwcabhnuulcnnnte=1
F:\FSX\GAUGES\PMDG_MD11.DLL.turtznwlttcqqztielhwlrzaieokobnobiqwhtob=2
F:\FSX\GAUGES\PMDG_MD11_ACS.DLL.lzuionhnciernauowinqhewcieitticrcqntwcbe=2
F:\FSX\Modules\FSUIPC4.dll.utkobowaueriuewkenbceielkaaakrozzwbwqkqb=1
F:\FSX\PMDG\DLLs\PMDGEvents.dll.heboqzrawuolaluzonzciinuitelweqqobobkloz=1
F:\FSX\PMDG\DLLs\PMDGEvents.dll.twonzerzlekbwlzzcoelneezunqqrziuclekilzr=1
F:\FSX\PMDG\DLLs\PMDGOptions.dll.hoqiwnquwothhzlucehrlakntwoaazrotwwhennn=1
F:\FSX\PMDG\DLLs\PMDGOptions.dll.wionbilzkccarcwclnzznhzlutzecwhwnuwlkwah=1
F:\FSX\PMDG\DLLs\PMDGSounds.dll.welrtucqliaailtkrkuzcteihbnlkwquhenzeont=1
F:\FSX\PMDG\DLLs\PMDGSounds.dll.zhbournewolarwhrkeqhaizqqzqlrnhbbllanewi=1
F:\FSX\VistaMare\ViMaCoreX.dll.izcbtrakwqkcccwcwznuhcaezlocaqaqwnanhbqn=1
F:\FSX\VistaMare\ViMaCoreX.dll.uwawztahnquwqhawnzieqqtakthtallozikwtkli=1
F:\FSX\\Flight One Software\Ultimate Traffic 2\UT2Services.exe.lictweeiwnwotccnwzciqhowbzqezzlqeabtzwub=1
D:\IVAO\IvAp v2\ivap_fsx_bootstrap.dll.kqckqcnakrlkiwuaolihwalzirkrltkuqinhctqb=1
F:\FSX\GAUGES\Cessna.DLL.otuokboqbnlwecrwotzqnonannabunekzazloztc=2
F:\FSX\GAUGES\Cessna172.DLL.aoeqnoiqnciqlaewnoehchzkcneerllbqooblakt=2
F:\FSX\GAUGES\Cessna182s.DLL.ierrqwoueqbcheiclbotczwekruateqhbaczuchu=2
F:\FSX\GAUGES\CessnaWAlpha.DLL.aukulqbocniqaequuekebhuinctrthccalriuall=2
F:\FSX\GAUGES\Bendix_King_Radio.DLL.iwztaqhenzoklztotnonzqitieqcnckiaeznuzzo=2
F:\FSX\GAUGES\Bell_206B.DLL.wohbltcqtzknzqiarbncnzwlcbauebhlzuhbnlii=2
F:\FSX\bglmanx.dll.abqnkqiwbiwwwkirbnaibetbnclceaqnezuthatu=1
D:\Super Traffic Board V3\STBServer\STBServer.dll.nuuzccuuikauecczieunohcwzkqtiueqiourwaat=1
D:\SuperTrafficBoard Data Server V3.1\StbDataServer.exe.wttqrocqeikkebahcbqrzbhrqbqalwcuelqncaae=1
F:\FSX\GAUGES\Magnetic_Compass.DLL.oeoqerluektcwcoezhuclabcluuwoezbnrhilbhi=2
F:\FSX\Modules\LVLD.dll.lwwhkrniiilihiucbcekboztrltninewtehobueo=1
F:\FSX\GAUGES\LVLD\B767oh.GAU.hcwohoacqetutuznqiiaontlubeqlwcluhqenuok=2
F:\FSX\GAUGES\LVLD\B767main.GAU.uiibhbhzcrahlattlzoioiecahqhccqtckhoeozc=2
F:\FSX\GAUGES\LVLD\B767Afds.GAU.neekaieuoihthlzzancbiqlbozlotczkeeklczho=2
F:\FSX\GAUGES\LVLD\B767at.GAU.noclwoibiczzweckuuqlelbeqobqnunkohacrrka=2
F:\FSX\GAUGES\LVLD\B767FMC.GAU.eeqiqoncnoauhtcakkkcziicwnuquriqhrnioinu=2
F:\FSX\GAUGES\LVLD\B767ehsi.GAU.aeowhnawcaiizniuqkiuhqkqlcrnrqzwwrtihieh=2
F:\FSX\GAUGES\LVLD\B767eadi.GAU.tclwzbhkarzozzcknatebzlhqcwlwluunkielbhr=2
F:\FSX\GAUGES\LVLD\B767eicas.GAU.aqibbbrabwoneqinutuckuraornazaetoeehitia=2
F:\FSX\GAUGES\LVLD\B767leicas.GAU.itctunqlkllqoqrlcztnnawrrhelncrarkrniaek=2
F:\FSX\GAUGES\LVLD\B767Overhead.GAU.tqqonzqtlznrkbitnelitcuraoiktnhcihhwakih=2
F:\FSX\GAUGES\LVLD\B767pedestal.GAU.ueuzcciwebelrunwzcelatwuitekuetknuzwtowz=2
F:\FSX\GAUGES\LVLD\B767Radios.GAU.iqbeibrnkrcooiohqwqeawhelwhkwnhqucuahcob=2
F:\FSX\PMDG\DLLs\PMDG_HUD_interface.dll.rlorzunlaqtztelnacckaqrleqatlitwthubowbi=1
F:\FSX\GAUGES\PMDG_737NGX.DLL.qczlliqiwnnwieuhciwaecltektlnabwebonqrwe=2
F:\FSX\GAUGES\PMDG_737NGX_3.DLL.bbaqzhiurlireiottokcheicburqieoozoohccbe=2
F:\FSX\PMDG\DLLs\PMDG_HUD_interface.dll.cubnzbanboqwenuakqcchhcwwowawanqauetbqqu=1
F:\FSX\GAUGES\PMDG_737NGX.DLL.uobaunblubnhnliohbknhaolzabetbbwlzcheaob=2
F:\FSX\fsdreamteam\couatl\couatl.exe.wnawklznzubiohtuhqllozlnqbnboeorbelwwznn=1
F:\FSX\bglmanx.dll.aehcirczttrzticebcqnwtuelowziatonbaicqil=1
F:\FSX\PMDG\DLLs\PMDG_HUD_interface.dll.elokzlzzballwziubanaozoknntbnnrweelwnttz=1
F:\FSX\GAUGES\PMDG_737NGX.DLL.lciozqkzwtkzozqcbnllhrlacoiuqiqzirlhlzba=2
[USERINTERFACE]
Map_Orientation=2
OpenATCOnCreate=0
PageID=6
PAUSE_ON_LOST_FOCUS=0
PROMPT_ON_EXIT=1
SelectAircraftManufacturer=Alle
SelectAircraftPublisher=Alle
SelectAircraftType=737-800
ShowAllACPaintSchemes=1
SHOW_MISSION_CAPTIONS=0
SITUATION=FLIGHTS\OTHER\FLTSIM
DisplayFuelAsWeight=0
[VirtualCopilot]
VirtualCopilotActive=0
[Weather]
AdjustForMagVarInDialog=1
CLOUD_COVERAGE_DENSITY=16
CLOUD_DRAW_DISTANCE=4
DETAILED_CLOUDS=1
DisableTurbulence=0
DownloadWindsAloft=0
DynamicWeather=2
MaxGustRampSpeed=200
MaxGustTime=500
MaxVarRampSpeed=75
MaxVarTime=50
MAX_UNLIMITED_VIS=64000
MinGustRampSpeed=1
MinGustTime=10
MinVarRampSpeed=10
MinVarTime=5
THERMAL_VISUALS=0
TurbulenceScale=1.000000
WeatherGraphDataInDialog=0
WeatherServerAddress=fs2k.zone.com
WeatherServerPort=80
WindshieldPrecipitationEffects=1
[RWW_WEATHER_MAP]
SHOW_AIRPORTS=0
SHOW_VORS=0
SHOW_NDBS=0
SHOW_APPROACHES=0
SHOW_INTERSECTIONS=0
SHOW_VICTOR=0
SHOW_JET=0
SHOW_AIRSPACE=0
SHOW_FLIGHTPLAN=1
SHOW_WEATHERSTATIONS=1
SHOW_WEATHERSYSTEMS=1
SHOW_DATATAGS=1
SHOW_TERRAIN=1
[BufferPools]
RejectThreshold=131072
[JOBSCHEDULER]
AffinityMask=14
[MULTIPLAYER]
condAccoutPassword=0
VoiceVolume=0.000000
-
and here is my scenery.cfg:
[General]
Title=FS9-Umweltszenerie
Description=FS9-Szeneriedaten
Clean_on_Exit=TRUE
[Area.001]
Title=Standardgelände
Texture_ID=1
Local=Scenery\World
Layer=1
Active=TRUE
Required=TRUE
[Area.002]
Title=Standardszenerie
Local=Scenery\BASE
Layer=2
Active=TRUE
Required=TRUE
[Area.003]
Title=0000 Basis
Local=Scenery\0000
Layer=3
Active=TRUE
Required=FALSE
[Area.004]
Title=0001 Basis
Local=Scenery\0001
Layer=4
Active=TRUE
Required=FALSE
[Area.005]
Title=0002 Basis
Local=Scenery\0002
Layer=5
Active=TRUE
Required=FALSE
[Area.006]
Title=0003 Basis
Local=Scenery\0003
Layer=6
Active=TRUE
Required=FALSE
[Area.007]
Title=0004 Basis
Local=Scenery\0004
Layer=7
Active=TRUE
Required=FALSE
[Area.008]
Title=0005 Basis
Local=Scenery\0005
Layer=8
Active=TRUE
Required=TRUE
[Area.009]
Title=0006 Basis
Local=Scenery\0006
Layer=9
Active=TRUE
Required=FALSE
[Area.010]
Title=0007 Basis
Local=Scenery\0007
Layer=10
Active=TRUE
Required=FALSE
[Area.011]
Title=0100 Basis
Local=Scenery\0100
Layer=11
Active=TRUE
Required=FALSE
[Area.012]
Title=0101 Basis
Local=Scenery\0101
Layer=12
Active=TRUE
Required=FALSE
[Area.013]
Title=0102 Basis
Local=Scenery\0102
Layer=13
Active=TRUE
Required=FALSE
[Area.014]
Title=0103 Basis
Local=Scenery\0103
Layer=14
Active=TRUE
Required=FALSE
[Area.015]
Title=0104 Basis
Local=Scenery\0104
Layer=15
Active=TRUE
Required=FALSE
[Area.016]
Title=0105 Basis
Local=Scenery\0105
Layer=16
Active=TRUE
Required=FALSE
[Area.017]
Title=0106 Basis
Local=Scenery\0106
Layer=17
Active=TRUE
Required=FALSE
[Area.018]
Title=0107 Basis
Local=Scenery\0107
Layer=18
Active=TRUE
Required=FALSE
[Area.019]
Title=0200 Basis
Local=Scenery\0200
Layer=19
Active=TRUE
Required=FALSE
[Area.020]
Title=0201 Basis
Local=Scenery\0201
Layer=20
Active=TRUE
Required=FALSE
[Area.021]
Title=0202 Basis
Local=Scenery\0202
Layer=21
Active=TRUE
Required=FALSE
[Area.022]
Title=0203 Basis
Local=Scenery\0203
Layer=22
Active=TRUE
Required=FALSE
[Area.023]
Title=0204 Basis
Local=Scenery\0204
Layer=23
Active=TRUE
Required=FALSE
[Area.024]
Title=0205 Basis
Local=Scenery\0205
Layer=24
Active=TRUE
Required=FALSE
[Area.025]
Title=0206 Basis
Local=Scenery\0206
Layer=25
Active=TRUE
Required=FALSE
[Area.026]
Title=0207 Basis
Local=Scenery\0207
Layer=26
Active=TRUE
Required=FALSE
[Area.027]
Title=0300 Basis
Local=Scenery\0300
Layer=27
Active=TRUE
Required=FALSE
[Area.028]
Title=0301 Basis
Local=Scenery\0301
Layer=28
Active=TRUE
Required=FALSE
[Area.029]
Title=0302 Basis
Local=Scenery\0302
Layer=29
Active=TRUE
Required=FALSE
[Area.030]
Title=0303 Basis
Local=Scenery\0303
Layer=30
Active=TRUE
Required=FALSE
[Area.031]
Title=0304 Basis
Local=Scenery\0304
Layer=31
Active=TRUE
Required=FALSE
[Area.032]
Title=0305 Basis
Local=Scenery\0305
Layer=32
Active=TRUE
Required=FALSE
[Area.033]
Title=0306 Basis
Local=Scenery\0306
Layer=33
Active=TRUE
Required=FALSE
[Area.034]
Title=0307 Basis
Local=Scenery\0307
Layer=34
Active=TRUE
Required=FALSE
[Area.035]
Title=0400 Basis
Local=Scenery\0400
Layer=35
Active=TRUE
Required=FALSE
[Area.036]
Title=0401 Basis
Local=Scenery\0401
Layer=36
Active=TRUE
Required=FALSE
[Area.037]
Title=0402 Basis
Local=Scenery\0402
Layer=37
Active=TRUE
Required=FALSE
[Area.038]
Title=0403 Basis
Local=Scenery\0403
Layer=38
Active=TRUE
Required=FALSE
[Area.039]
Title=0404 Basis
Local=Scenery\0404
Layer=39
Active=TRUE
Required=FALSE
[Area.040]
Title=0405 Basis
Local=Scenery\0405
Layer=40
Active=TRUE
Required=FALSE
[Area.041]
Title=0406 Basis
Local=Scenery\0406
Layer=41
Active=TRUE
Required=FALSE
[Area.042]
Title=0407 Basis
Local=Scenery\0407
Layer=42
Active=TRUE
Required=FALSE
[Area.043]
Title=0500 Basis
Local=Scenery\0500
Layer=43
Active=TRUE
Required=FALSE
[Area.044]
Title=0501 Basis
Local=Scenery\0501
Layer=44
Active=TRUE
Required=FALSE
[Area.045]
Title=0502 Basis
Local=Scenery\0502
Layer=45
Active=TRUE
Required=FALSE
[Area.046]
Title=0503 Basis
Local=Scenery\0503
Layer=46
Active=TRUE
Required=FALSE
[Area.047]
Title=0504 Basis
Local=Scenery\0504
Layer=47
Active=TRUE
Required=FALSE
[Area.048]
Title=0505 Basis
Local=Scenery\0505
Layer=48
Active=TRUE
Required=FALSE
[Area.049]
Title=0506 Basis
Local=Scenery\0506
Layer=49
Active=TRUE
Required=FALSE
[Area.050]
Title=0507 Basis
Local=Scenery\0507
Layer=50
Active=TRUE
Required=FALSE
[Area.051]
Title=0600 Basis
Local=Scenery\0600
Layer=51
Active=TRUE
Required=FALSE
[Area.052]
Title=0601 Basis
Local=Scenery\0601
Layer=52
Active=TRUE
Required=FALSE
[Area.053]
Title=0602 Basis
Local=Scenery\0602
Layer=53
Active=TRUE
Required=FALSE
[Area.054]
Title=0603 Basis
Local=Scenery\0603
Layer=54
Active=TRUE
Required=FALSE
[Area.055]
Title=0604 Basis
Local=Scenery\0604
Layer=55
Active=TRUE
Required=FALSE
[Area.056]
Title=0605 Basis
Local=Scenery\0605
Layer=56
Active=TRUE
Required=FALSE
[Area.057]
Title=0606 Basis
Local=Scenery\0606
Layer=57
Active=TRUE
Required=FALSE
[Area.058]
Title=0607 Basis
Local=Scenery\0607
Layer=58
Active=TRUE
Required=FALSE
[Area.059]
Title=0700 Basis
Local=Scenery\0700
Layer=59
Active=TRUE
Required=FALSE
[Area.060]
Title=0701 Basis
Local=Scenery\0701
Layer=60
Active=TRUE
Required=FALSE
[Area.061]
Title=0702 Basis
Local=Scenery\0702
Layer=61
Active=TRUE
Required=FALSE
[Area.062]
Title=0703 Basis
Local=Scenery\0703
Layer=62
Active=TRUE
Required=FALSE
[Area.063]
Title=0704 Basis
Local=Scenery\0704
Layer=63
Active=TRUE
Required=FALSE
[Area.064]
Title=0705 Basis
Local=Scenery\0705
Layer=64
Active=TRUE
Required=FALSE
[Area.065]
Title=0706 Basis
Local=Scenery\0706
Layer=65
Active=TRUE
Required=FALSE
[Area.066]
Title=0707 Basis
Local=Scenery\0707
Layer=66
Active=TRUE
Required=FALSE
[Area.067]
Title=0800 Basis
Local=Scenery\0800
Layer=67
Active=TRUE
Required=FALSE
[Area.068]
Title=0801 Basis
Local=Scenery\0801
Layer=68
Active=TRUE
Required=FALSE
[Area.069]
Title=0802 Basis
Local=Scenery\0802
Layer=69
Active=TRUE
Required=FALSE
[Area.070]
Title=0803 Basis
Local=Scenery\0803
Layer=70
Active=TRUE
Required=FALSE
[Area.071]
Title=0804 Basis
Local=Scenery\0804
Layer=71
Active=TRUE
Required=FALSE
[Area.072]
Title=0805 Basis
Local=Scenery\0805
Layer=72
Active=TRUE
Required=FALSE
[Area.073]
Title=0806 Basis
Local=Scenery\0806
Layer=73
Active=TRUE
Required=FALSE
[Area.074]
Title=0807 Basis
Local=Scenery\0807
Layer=74
Active=TRUE
Required=FALSE
[Area.075]
Title=0900 Basis
Local=Scenery\0900
Layer=75
Active=TRUE
Required=FALSE
[Area.076]
Title=0901 Basis
Local=Scenery\0901
Layer=76
Active=TRUE
Required=FALSE
[Area.077]
Title=0902 Basis
Local=Scenery\0902
Layer=77
Active=TRUE
Required=FALSE
[Area.078]
Title=0903 Basis
Local=Scenery\0903
Layer=78
Active=TRUE
Required=FALSE
[Area.079]
Title=0904 Basis
Local=Scenery\0904
Layer=79
Active=TRUE
Required=FALSE
[Area.080]
Title=0905 Basis
Local=Scenery\0905
Layer=80
Active=TRUE
Required=FALSE
[Area.081]
Title=0906 Basis
Local=Scenery\0906
Layer=81
Active=TRUE
Required=FALSE
[Area.082]
Title=0907 Basis
Local=Scenery\0907
Layer=82
Active=TRUE
Required=FALSE
[Area.083]
Title=1000 Basis
Local=Scenery\1000
Layer=83
Active=TRUE
Required=FALSE
[Area.084]
Title=1001 Basis
Local=Scenery\1001
Layer=84
Active=TRUE
Required=FALSE
[Area.085]
Title=1002 Basis
Local=Scenery\1002
Layer=85
Active=TRUE
Required=FALSE
[Area.086]
Title=1003 Basis
Local=Scenery\1003
Layer=86
Active=TRUE
Required=FALSE
[Area.087]
Title=1004 Basis
Local=Scenery\1004
Layer=87
Active=TRUE
Required=FALSE
[Area.088]
Title=1005 Basis
Local=Scenery\1005
Layer=88
Active=TRUE
Required=FALSE
[Area.089]
Title=1006 Basis
Local=Scenery\1006
Layer=89
Active=TRUE
Required=FALSE
[Area.090]
Title=1007 Basis
Local=Scenery\1007
Layer=90
Active=TRUE
Required=FALSE
[Area.091]
Title=1100 Basis
Local=Scenery\1100
Layer=91
Active=TRUE
Required=FALSE
[Area.092]
Title=1101 Basis
Local=Scenery\1101
Layer=92
Active=TRUE
Required=FALSE
[Area.093]
Title=1102 Basis
Local=Scenery\1102
Layer=93
Active=TRUE
Required=FALSE
[Area.094]
Title=1103 Basis
Local=Scenery\1103
Layer=94
Active=TRUE
Required=FALSE
[Area.095]
Title=1104 Basis
Local=Scenery\1104
Layer=95
Active=TRUE
Required=FALSE
[Area.096]
Title=1105 Basis
Local=Scenery\1105
Layer=96
Active=TRUE
Required=FALSE
[Area.097]
Title=1106 Basis
Local=Scenery\1106
Layer=97
Active=TRUE
Required=FALSE
[Area.098]
Title=1107 Basis
Local=Scenery\1107
Layer=98
Active=TRUE
Required=FALSE
[Area.099]
Title=Afrika
Local=Scenery\AFRI
Layer=99
Active=TRUE
Required=FALSE
[Area.100]
Title=Asien
Local=Scenery\ASIA
Layer=100
Active=TRUE
Required=FALSE
[Area.101]
Title=Australien
Local=Scenery\AUST
Layer=101
Active=TRUE
Required=FALSE
[Area.102]
Title=Osteuropa
Local=Scenery\EURE
Layer=102
Active=TRUE
Required=FALSE
[Area.103]
Title=Westeuropa
Local=Scenery\EURW
Layer=103
Active=TRUE
Required=FALSE
[Area.104]
Title=Nordamerika (Mitte)
Local=Scenery\NAMC
Layer=104
Active=TRUE
Required=FALSE
[Area.105]
Title=Nordamerika (Osten)
Local=Scenery\NAME
Layer=105
Active=TRUE
Required=FALSE
[Area.106]
Title=Nordamerika (Westen)
Local=Scenery\NAMW
Layer=106
Active=TRUE
Required=FALSE
[Area.107]
Title=Ozeanien
Local=Scenery\OCEN
Layer=107
Active=TRUE
Required=FALSE
[Area.108]
Title=SĂĽdamerika
Local=Scenery\SAME
Layer=108
Active=TRUE
Required=FALSE
[Area.109]
Title=Oshkosh-Luftaufnahme
Local=Scenery\Cities\Oshkosh
Layer=109
Active=TRUE
Required=FALSE
[Area.110]
Title=St. Maarten
Local=Scenery\Cities\StMaarten
Layer=110
Active=TRUE
Required=FALSE
[Area.111]
Title=Rio de Janeiro
Local=Scenery\Cities\Rio
Layer=111
Active=TRUE
Required=FALSE
[Area.112]
Title=Las Vegas
Local=Scenery\Cities\LasVegas
Layer=112
Active=TRUE
Required=FALSE
[Area.113]
Title=Globale, allgemeine und Fahrzeugbibliotheken
Local=Scenery\Global
Layer=113
Active=TRUE
Required=TRUE
[Area.114]
Title=Propellerobjekte
Local=Scenery\Props
Layer=114
Active=TRUE
Required=TRUE
[Area.115]
Title=Add-On-Szenerie
Local=Addon Scenery
Layer=115
Active=TRUE
Required=FALSE
[Area.116]
Title=MegaSceneryX Hawaii Oahu
Local=F:\FSX\MegaSceneryX\HawaiiOahu\Hawaii Oahu
Remote=
Active=TRUE
Required=FALSE
Layer=116
[Area.117]
Title=MegaSceneryX Reno
Local=F:\FSX\MegaSceneryX\Reno\Reno
Remote=
Active=TRUE
Required=FALSE
Layer=117
[Area.118]
Title=MegaSceneryX Dallas
Local=F:\FSX\MegaSceneryX\Dallas\Dallas
Remote=
Active=TRUE
Required=FALSE
Layer=118
-
I guess, 20 frames must be enough and shows that my system has no problem in handling the scenerys
20 fps 17 nm out of KORD is very low.
The second unmarked all Ultimate Terrain Entrys I've found in the scenery library and again, at exactly 17nm away of KORD I've get my CTD...
Just fisabling the Ultimate terrain entries it's not enough to disable it, because it also modify a lot of default files, the only way to disable it is to use its own setup utility to restore the modifications to the default scenery, and then using its uninstaller to install it.
Until you can properly remove UT, you can't say you have tested with it disabled. I can only repeat and confirm, both that KORD is NOT loaded until 10 NM out AND that, of course, I've tested it making a full flight, and of course no crashes whatsoever. Right now, the only patter we have, that all users that had the crash, had UTX installed so, as I've said in all my previous message, have it properly removed, and try again.
-
Then I'll leave KORD off....
I'am not interested in reinstall UTX for only one airport... Good to have Midway as an alternative.
Maybe the upcoming (?) update of KORD will run? Who knows....
-
I'am not interested in reinstall UTX for only one airport...
It's not only one airport, it's only one airport you found, there are thousands of airports in FSX, it's very likely other would also crash, it's just you don't go there to check.
Reinstalling UTX, as you can see from other messages here, has fixed the problem for some users.
Maybe the upcoming (?) update of KORD will run? Who knows....
Unlikely, since the the problem is not caused by it. As I've said, no objects for KORD are loaded outside 10.0 NM.
-
I've wrote my problem in the Ultimate Terrain forum, too and it looks like Ultimate Terrain is the problem.
I don't need to uninstall it for testing. Within UT USA there is an option for quick enableing and disabling UT they've said and I disabled it. Touch and go in Midway and finally landed in O'Hare... The problem must be UT USA. Now I wait what the guys will tell me next to do.