FSDreamTeam forum
Products Support => JFK for FSX/P3D => Topic started by: k4show on August 14, 2010, 10:40:18 pm
-
I bought FSDT and it was running great on my FSX SP2 installation. I decided to reinstall FSX to a new harddrive deleting every addon and fsx obviously and everything has been smooth. I decided to install FSDT JFK since I was going to be flying there soon and got the infamous bglmanx.dll error on startup. I am running FSX Acceleration. I tried every fix listed on here, reinstalled probably 8 times, made sure the bglman files were deleted, uninstalled AVG antivirus, I also made sure my scenery.cfg file was clean and it was. Any help would be greatly appreciated, this was a great scenery when I had it running on my old install.
Windows 7 64 Bit
Core 2 Duo E7200
ATI HD4850
4GB of DDR2 800mhz (if that info helps)
-
When you reinstalled JFK ? Because we had some updates yesterday.
You said you reinstalled 8 times, but this is not what is suggested in all other fixes.
What you might need to do, instead, is to keep trying, even several times, to ALLOW the module to run, even if FSX suggest against it, because the error usually goes away by itself. And, reboot Windows if it doesn't work after 2-3 tries. And, allow 20-30 seconds between each try, to be sure FSX is closed properly.
The things you can try are:
- Turn Off UAC, if it's turned ON, or turn it ON, if it's turned OFF.
- Be sure FSX is not running in XP Compatibility mode
Try also this:
- Open the FSX.CFG file (located at %APPDATA%\Microsoft\FSX) with Notepad, look for ALL lines that contains bglmanx.dll under the [Trusted] section, and remove all the lines, the whole line. Then save the file and try again.
- If it still doesn't work, try to open the FSX.CFG again, you should see a single line referencing to bglmanx.dll, with a long string of characters, with a =-1 or a =0 at the end (most likely). Try to change that number to =1, save the file and try again.
-
I reinstalled it yesterday at 3PM EST. I will try again today though and follow your instructions and report back.
-
Hello FSDT. Lets go straight away.This is of course bglmanx.dll fail. I know it was 1000000000000 times at this forum but...nothing is working for me at all. So lets discribe my issue.
I got 2 systems-PC and Laptop. Both are with same system (windows 7 ultimate 64bit) and both with FSX +Acc
PC FSX is with over 80+addons (mostly scenery). Laptop is working on clean FSXACC. So today I decide to install more addons for PC. I start with Zurich (bought Zurich and Geneva) and when i was trying to run FSX for activation process I see error. So i made quick look on google and I found some solutions at forum. I reinstall scenery,addon stand alone,used Geneva as prime setup,reinstall/install MS Vis C++ 2005,MS Vis C++ 2005 64bit,MS Vis C++ 2005 SP1,MS Vis C++ 2008 itd.... NO EFFECT.All the time i see
http://img685.imageshack.us/i/errorrf.jpg
I was trying to use Zurich setup but same fail. I am after 1000000 of uninstalings/installs/deleting fsx.cfg and other attemps.Right now I am stock because I cant install more addons because cant active this scenery as well Geneva.
The best thing is it is working on Laptop without any fail. Laptop has MS Vic C++2005 and 2008.I was trying to copy files but no luck.Belowe u can find what addons are installed on PC where BGLMANX is failing. Please dont tell me I need to reinstall FSX because i lost all addons and this is not a way.What about if somebody has over 200gb of addons then he decide to buy some of ur products and as far what he can see is this fail:(
ADDONS LIST:
http://img231.imageshack.us/i/addonsp.jpg
-
The best thing is it is working on Laptop without any fail.
That's the only thing that really matters, which clearly proves that the bglmanx.dll is NOT the culprit but, instead, is the victim of something wrong on the other computer, since it obviously working on your laptop.
No, you just can't fix anything by manually copying files. The most likely issue is that, something has created a problem with the Visual C++ runtimes, and this just can't be fixed by copying files.
Try to do this first. Do exactly as written here, don't skip ANY steps:
- DOWNLOAD (I repeat DOWNLOAD again) the Stand-Alone Addon Manager for FSX.
- Install it. Don't launch FSX yet.
- Reboot Windows. Don't launch FSX yet.
- Go to the Control Panel, Uninstall the Stand-Alone Addon Manager. Don't launch FSX yet.
- Reboot Windows. Don't launch FSX yet.
- Reinstall the Stand-Alone Addon Manager. Don't launch FSX yet.
- Reboot Windows
- Try launching FSX. It should ask you to authorize the Addon Manager and the Couatl script engine. Allow them both.
- If they crash the first time, keep allowing it to run. Try a couple of times, then reboot Windows and try again.
-
What I should do If I have already installled Addon Menager and Zurich.Uninstall?
Should I clear FSX.cfg?
-
What I should do If I have already installled Addon Menager and Zurich.Uninstall? Should I clear FSX.cfg?
Only do exactly as told.
The current Addon Manager uninstaller will take care of the FSX.CFG cleaning automatically. If you had to do extra clean up, I would have told you.
-
OK so I follow all steps as you said.
Same issue.
Couple of restarts and nothing.
Strange think is about FSX.Its not asking me about authorization the Addon Manager and the Couatl script engine.Its just straight away failing bglmenX.dll
If i press YES game its freezee even I make few restarts.
-
Strange think is about FSX.Its not asking me about authorization the Addon Manager and the Couatl script engine.Its just straight away failing bglmenX.dll
Have you replied "YES" to the question "Do you want to remove the Addon Manager?" and "Do you want to remove the Couatl Scripting engine ?". Because the actual clean up of the FSX.CFG is only made if you reply YES to both questions.
Try doing it again.
-
YES.I know about it.I press all YES.All the time YES YES YES YES. :'(
After uninstall i checked fsx.cfg and there was no THRUST section at all.I follow your steps then run fsx and...no asking about authoryzation.
Again quick look to fsx.cfg and entry was there without my permission.
-
Again quick look to fsx.cfg and entry was there without my permission.
Try to recall if you ever decided to permanently authorize "Virtuali s.a.s." as a trusted publisher. Because, if you have, then it's normal you don't get the request and the module appears automatically in the Trusted section.
But if you haven't, then something is very wrong with your Windows Trusted system, which could explain why the program isn't working in the first place.
To verify this, you can go to the Control Panel, under "Internet Options", look for the "Content" tab, there should be an "Authors" button, that will list the software authors that you trusted. If you see "Virtuali s.a.s", try to remove it, then repeat the procedure.
-
OK so we have a small progress.
First i uninstall all including MS VISUAL Studio.
Restart.
Now i install exactly same MS VISUAL Studio as on laptop.
I remove trusted from Internet options(was on PC for Virtual;is not on laptop).
Restart.
Installing Addon Menager
Restart.
Run Game and FSX ask me about authorization once then bglmanx.dll fail and another authorizaion.
Now I am going to follow you instruction again.
BTW:Should I use 64bit MSV C++ if using 64bit system?
-
BTW:Should I use 64bit MSV C++ if using 64bit system?
Updating the 64 bit version of the runtimes will not do any harm, and will be a good thing to do anyway.
However, they are only relevant to 64 bit apps. FSX and all its addons are 32 bit apps so, they are affected (and they require) the 32 bit version of the libraries, even when running under a 64 bit OS.
-
OK so after another couple of restarts FSX still failing for BGLMANX.dll
So i thniks the best solution will be reinstall a whole FSX :'( :-\ and install first Zurich and Geneva.
I thniks some of addon is not working with this and this is real issue.
I dont care if I install Zurich and Geneva-after activation this stupid dll could be broken-Ill be not crying.
Thanks for help.
-
So i thniks the best solution will be reinstall a whole FSX
Try an simpler route first:
Uninstall just SP2 (or Acceleration), then reinstall it. This shouldn't impact any of your installed addons, especially if you don't try to run FSX in the middle of the process.
This might fix something in your system .dll. I'm quite sure this problem has something to do with the Windows Side-by-side mechanism of runtime libraries that has gone wrong.
-
So u think if I uninstall ACC is not imapcting my addons at all?
-
It shouldn't. Try to uninstall it, and then reinstall it, without doing anything else in between, except rebooting Windows, which might be helpful.
-
OK so if I reinstall just Acceleraion Pack there was same fail.
So what I do is whole FSX reinstall.This is working for me.
FSX+ACC+Zurich/Geneva itd.-then other addons.
-
Its me again.I am really pissed of.
Here is my story.
2 weeks ago I reinstall Windows and FSX.
Yesterday I got my 150 addons and works perfect including Zurich and Geneva.
I flew few times at different locations and planes.Works perfect.
Today after instaling my last 10 addons I got BGLMANX.DLL ERROR
WHAT THE HACK? >:(
I dont want to reinstall all of this because its lots of time,settings cdn.
WHAT IS WRONG WITH THIS STUPID FILE?
ITS OVER 25 threads at this forum where people trying to find help.
Last time I need to do reinstall of all my addons.NO NOT THIS TIME.!!
I think you should make sticky thread about this file because its a joke!
WHY IT IS CRASHING?WHY YESTERDAY IT WAS WORKING AND TODAY IS ERROR EACH TIME.
No matter how many restarts,uninstalling,installing,compability mode settings(works for one user) ITS NOT WORKING.
WHY FSDT doing such a antypiracy software which is not working properlly.
AS u know there is plenty of webiste where users if they want can find ur software cracked and as far I see this is better choice than orginal because there is no error.
I know its about piracy but its works.Ur one is making me crying.
Here is picture showing error and info about addons installed today:
(http://ifotos.pl/mini/v33_hpsrqrw.JPG) (http://ifotos.pl/zobacz/v33_hpsrqrw.JPG/)
Addons installed today:
PLUM ISLAND V1.1
SWISS SMALL AIRFIELD 5
STAFSBERG SCENERY X
AS STOCKHOLM ARLAND V1.0
TATRA PHOTO SCENERY+PATCH+AUTOGEN
HEWANORRA INT AIRPORT ST LUCIA V1.0
UK2000 VFR AIRFIELDS VOL1 +UPD
UK2000 BIRMINGHAM EXTREME V1.01
UK2000 VFR AIRFIELDS VOL2 +UPD
UK MESH
VFR POLAND 3D LANDMARKS+PATCH
WARSZAWA PHOTO SCENERY
BTW:I try all steps from this whole forum.NO LUCK.
After pressing YES my FSX is not crashing but just stop responding and U can leave it for 24h.No Luck.
-
Today after instaling my last 10 addons I got BGLMANX.DLL ERROR
According to your list, none of those addons were from us, which means, you haven't changed, or updated the bglmanx.dll file which worked until yesterday.
So, clearly, something installed by any of *those* addons, have created a problem in your system, similar to the previous you had, which has AFFECTED bglmanx.dll. So you are confusing the culprit with the victim here...
WHAT IS WRONG WITH THIS STUPID FILE?
Nothing, because it worked (according to your report) UNTIL you installed other addons, none of them includes bglmanx.dll, which is still the one that it used to work before.
ITS OVER 25 threads at this forum where people trying to find help.
And each of them eventually fixed the problem. Of course, if you care to read the thread to its eventual solution, not just run a "search" without trying to understand *WHAT* was the problem and *HOW* it was solved.
Guess what, the solution was *always* system-related so, nothing related to bglmanx.dll, but something else that went wrong in the system that *affected* it.
And, many times people come here to complain, get some help, but never come back to say they fixed it or how. In fact, even YOU fixed (without needing a new/updated/fixed bglmanx.dll) the problem you were having in October, but never came back to say "I've fixed it this way"...
I think you should make sticky thread about this file because its a joke!
Obviously not, because the file, in itself, is NOT the *cause* of the problem but, instead, it fails due to OTHER issues, which can be VERY different, from antivirus, to corrupted/wrong/missing VC++ libraries, to the Windows trust system going wrong, trust certificates being corrupted, and all these solution requires to be handled differently, which is why they can't be deal with an "universal" solution.
WHY IT IS CRASHING?WHY YESTERDAY IT WAS WORKING AND TODAY IS ERROR EACH TIME.
You are saying it yourself. It WAS working until yesterday so, the file can't obviously be the cause, but something else the happened in your system since yesterday.
WHY FSDT doing such a antypiracy software which is not working properlly.
The software works properly. YOUR system is NOW having an issue that is *preventing* it to work as it supposed to, an issue which, according to your report, didn't happened until yesterday and bglmanx.dll hasn't obviously changed in the meantime.
AS u know there is plenty of webiste where users if they want can find ur software cracked
Which none of them actually work, and only for a couple of old version of our earlier sceneries. Of course, if you are accustomed to *visit* such websites, it's very likely you might have downloaded something ELSE (even a virus, for example...) which is creating a problem with your system now...
I know its about piracy
Anti piracy is less than 20% of what the Addon Manager does, but it's entirely intertwined with how we design sceneries, up to a point that even if we released a freeware scenery, it would STILL REQUIRE the Addon Manager, simply because we need it to obtain certain feature and performances we can't do without.
BTW:I try all steps from this whole forum.NO LUCK.
I'm sorry, those steps usually works in most cases. The others steps were ALREADY discussed into THIS topic but, if they don't work, it's clear that something has gone wrong in your system beyond repair, which has been probably caused by one of the last 10 addons before which, according to YOUR report, you had NO BGLMANX.DLL error.
Just for your info, when you see the "Flight simulator has encountered a problem with the xxxx file" message, the actual text is a little bit misleading because, in fact, FSX couldn't "encounter" a problem with that file because, that message is given even BEFORE even the 1st line of code of the affected file is executed! It's not as if FSX is "monitoring" what a program is *doing* (like the message might lead to believe), because it's not. The message text should have said "Flight Simulator has failed to LOAD a module, for unknown reasons", and the difference is very important because, having failed to load a module, means something *ELSE* in the system has prevented it to load, the module itself hasn't even been loaded YET. Which means, since it hasn't loaded, it can't be "his fault", because NONE of its code has been executed yet, at this time. A failure to *load* it's always something related to your system, like an antivirus blocking it, a virus corrupting it, a system .DLL missing or corrupted or in the wrong version, a Trust certificate corrupted, the Win Side-by-Side loading method being screwed, etc. NONE of these issues can be fixed by the Addon Manager itself, they are things which can go wrong in the system, and some of them are exclusive of FSX (like the use of Side-by-Side .DLL loading or the use of Trust certificates), which is why there are NO reports about this error about BGLMAN.DLL, which is the FS9 VERSION of it, and FS9 HAS the "Flight simulator has encountered a problem with the xxxx file" diagnostic.