FSDreamTeam forum
Products Support => GSX Support MSFS => Topic started by: Airbuspeter on May 31, 2025, 10:25:13 pm
-
have the couatl error message with fenix and PMDG.other planes i dont know.
couatl v5.0 (build 5765)
panic log started on Sat May 31 22:20:56 2025
problem raised by addon <unknown>
Traceback (most recent call last):
File ".\common\fsm.py", line 73, in executeDoFuncToCompletion
File ".\GSX\assistanceServices\__init__.py", line 2679, in do
File ".\GSX\assistanceServices\__init__.py", line 4644, in showMessage
File ".\GSX\__init__.py", line 1377, in showMessage
File ".\common\youcontrol.py", line 185, in showMessage
File ".\common\youcontrol.py", line 112, in showMessage
TypeError: showMessage() got an unexpected keyword argument 'beep'
{'User Pos': (51.28105917503429, 6.767160955454283, 39.2211 m, 2.86053 m, 276.02394894765325, -0.0009440176491612012, 0.001745329238474369, -0.0013876988971911351, 3.18211187210083, 1.0), 'Airport': 'EDDL', 'Requested parking services to': 'Terminal - A-Pier (A1-A16) | Gate A2', 'Requested assistance services at': 'Terminal - A-Pier (A1-A16) | Gate A2'}
-
Aircraft: Fenix A321
GSX Ver: 3.5.4
Problem:
After requesting catering, after the trucks are in place, and just prior to the two handlers spawning in the trucks after the doors are opened, Couatl will crash with the error listed below.
Been using GSX for years and haven't had issues, however since this most recent update to 3.5.x I have had numerous crashes similar to this. Yesterday when using 3.5.3 it was during pax boarding, after updating to 3.5.4 today I'm seeing it during catering.
This particular catering crash occurs at any airport, with any operator, the below example is from FSDT KIAH.
***UPDATE*** The error also occurs during refueling. It seems it occurs at the point when the "BEEP" is supposed to occur notifying you that the catering or fueling trucks are in place.
Couatl Log
channel.balance = -1
AssistanceServices.showMessage() Catering vehicles are in position WHITE
emulateText_MSFS [GSX] Catering vehicles are in position WHITE 3.0
Traceback (most recent call last):
File ".\GSX\assistanceServices\__init__.py", line 4672, in waitWarningFunc
File ".\GSX\__init__.py", line 1368, in showMessage
File ".\common\youcontrol.py", line 185, in showMessage
File ".\common\youcontrol.py", line 112, in showMessage
TypeError: showMessage() got an unexpected keyword argument 'beep'
{'User Pos': (29.983871781894976, -95.33839340384121, 32.7525 m, 2.85323 m, 0.10996884324125872, 0.0022183606506008457, 0.001745329238474369, 0.00010234175875839006, 3.18211187210083, 1.0), 'Airport': 'KIAH', 'Requested parking services to': 'Terminal C|Gate 39', 'Requested assistance services at': 'Terminal C|Gate 39'}
Panic Log
couatl v5.0 (build 5766)
panic log started on Sat May 31 16:10:54 2025
problem raised by addon <unknown>
Traceback (most recent call last):
File ".\GSX\assistanceServices\__init__.py", line 4672, in waitWarningFunc
File ".\GSX\__init__.py", line 1368, in showMessage
File ".\common\youcontrol.py", line 185, in showMessage
File ".\common\youcontrol.py", line 112, in showMessage
TypeError: showMessage() got an unexpected keyword argument 'beep'
{'User Pos': (29.983871781894976, -95.33839340384121, 32.7525 m, 2.85323 m, 0.10996884324125872, 0.0022183606506008457, 0.001745329238474369, 0.00010234175875839006, 3.18211187210083, 1.0), 'Airport': 'KIAH', 'Requested parking services to': 'Terminal C|Gate 39', 'Requested assistance services at': 'Terminal C|Gate 39'}
Anything I can do to fix this please let me know, as GSX integration with the Fenix A321 is basically unusable right now. (The issue also occurs if Catering is just called from the GSX menu as well).
I haven't checked to see if it occurs with other aircraft yet, I am going to check that shortly.
-
same. I just posted a topic on this as well.
For me it's during catering requests with the Fenix A321. At any airport. Same exact error.
-
By the way:
MSFS2020 ver. 1.38.2.0 (current)
Windows 10, DX11
I saw another topic where someone was having the same exact issue in MSFS2024 as well though.
-
The problem (which happened only if you turned down the Verbosity slider) is fixed by running the updater now.
-
thanks,
Yes I also noticed that the verbosity setting I had was not applying (all messages were appearing on screen).
Going to update and test now.
-
**Update**
Yes, it looks like this error was resolved with running the update tool for the most recent build.
Thanks.
A Few other issues:
1) I still see that the verbosity slider is not functional though. (All messages still appearing on screen despite the slider being in the "OFF" position)
2) Progressive boarding/integration with Fenix A32X not functioning correctly (Pax counter in EFB stops after 13 passengers), which causes the fenix boarding progress to hang even after GSX completes all boarding.
3) Services exclusion list keeps pushing all services to the exlude (right side) list after each update, requiring you to manually update the exclusion list after each update.
I can create new topics for these if you like.
-
Hello
Please note that all that is mentioned below never happened on previous releases
Situation
- PMDG 777-200ER
San Francisco A1V
- when loading field and boarding after gate attaches there is a message to not load fuel until truck is there
then this crash
```
couatl v5.0 (build 5765)
panic log started on Sat May 31 17:21:13 2025
problem raised by addon <unknown>
Traceback (most recent call last):
File ".\GSX\assistanceServices\__init__.py", line 4672, in waitWarningFunc
File ".\GSX\__init__.py", line 1377, in showMessage
File ".\common\youcontrol.py", line 185, in showMessage
File ".\common\youcontrol.py", line 112, in showMessage
TypeError: showMessage() got an unexpected keyword argument 'beep'
{'User Pos': (37.61398149854816, -122.38736554933226, 8.04168 m, 4.08755 m, 339.9527052093771, 0.013452901955889517, 0.013962633907794952, 0.00010487008820020708, 4.078833590698243, 1.0), 'Airport': 'KSFO', 'Requested assistance services at': 'Intl Terminal, Pier A|1V'}
```
- Also totally different aircraft face the same exact error with this "beep" traceback
It was horizon 787-9 and in EPKK some random parking there. Happens after boarding is initiated consistently
I noticed that 2 new updates where available back to back but it looks like it introduced a glitch? I like this program but this kills my flight experience
-
see the topic just below this one, I had this issue earlier.
Update/Refresh to the latest packages and it will fix this issue.
There are still other issues though, if you are using the Fenix (Progressive boarding).
Update (Topics now merged)
-
Again I've merged posts reporting the same error. The problem (which happened only if you turned down the Verbosity slider) is fixed by running the updater now.
-
after landing and at gate i deboard. with this crash.see Text attachement
-
I am seeing the same on a remote Stand during Boarding
couatl v5.0 (build 5766)
panic log started on Sun Jun 1 09:32:13 2025
problem raised by addon <unknown>
Traceback (most recent call last):
File ".\common\fsm.py", line 73, in executeDoFuncToCompletion
File ".\GSX\assistanceServices\__init__.py", line 2679, in do
File ".\GSX\assistanceServices\__init__.py", line 4644, in showMessage
File ".\GSX\__init__.py", line 1377, in showMessage
File ".\common\youcontrol.py", line 185, in showMessage
File ".\common\youcontrol.py", line 112, in showMessage
TypeError: showMessage() got an unexpected keyword argument 'beep'
{'Airport': 'LOWW', 'User Pos': (48.11440930868661, 16.57068169184834, 185.777 m, 2.84306 m, 205.96322557728988, 0.00016299017589776918, 0.001745329238474369, 0.00019506970596750567, 3.18211187210083, 1.0), 'Requested assistance services at': 'E - Parking Positions | E 49'}
-
I have the same problem !
See attachment
-
Again I've merged posts reporting the same error. The problem (which happened only if you turned down the Verbosity slider) is fixed by running the updater.
-
**Update**
Yes, it looks like this error was resolved with running the update tool for the most recent build.
Thanks.
A Few other issues:
1) I still see that the verbosity slider is not functional though. (All messages still appearing on screen despite the slider being in the "OFF" position)
I confirm this, problems with verbosity.
In my case, I had the bad idea to apply the OFFLINE installer, which was obviously not corrected ! So, I got the inital bug again !
I fed up with this ! So I went back to 3.5.3 using the previous OFFLINE installer. It seem to work now
-
In my case, I had the bad idea to apply the OFFLINE installer, which was obviously not corrected ! So, I got the inital bug again !
Well, there was a reason why I said to run the normal updater: it was because when I wrote that, the Offline installer didn't contained that fix.
Now it is updated, but in general, the Offline installer should be used only if you have reasons to believe a fix didn't reach you only due to CND replication delays, not normally.
-
Good afternoon,
Updated to 3.5.4 this morning
When loading with the Fenix A320, when the fuel truck was selected GSX crashed, tried again and the exact same crash at the same point (Couatl ERROR.txt)
Gave up and loaded fuel and passengers manually into the EFB, GSX pushback worked no problem
Upon arriving at destination, as soon as deboarding was selected, GSX crashed again (Couatl ERROR 2.txt)
Ive done this same flight last week, same aircraft, livery and airports.......no problems at all. It's only since I updated this has happended
Also since the update, I can't get rid of the GSX messages appearing on the screen despite having no messages selected in the settings as per usual.
Also in the GSX Installer, all the airports have gone from the Excluded airport services leaving nothing but an empty column
Thanks in advance
-
Again I've merged posts reporting the same error. The problem (which happened only if you turned down the Verbosity slider) is fixed by running the updater.