FSDreamTeam forum

Products Support => GSX Support FSX/P3D => Topic started by: fernandito on January 03, 2021, 11:22:08 pm

Title: Catering Crew Path Limits??
Post by: fernandito on January 03, 2021, 11:22:08 pm

Hello Folks;
Any way or remedy available to set the catering crew figure to remain within the aircraft fuselage without crossing over outside out the other door?. This same thing also happens with the AES CRJs aircrafts. Any thoughts or suggestions?

Regards
Fernando R.

Title: Re: Catering Crew Path Limits??
Post by: virtuali on January 05, 2021, 12:49:31 pm

This shouldn't happen, are you sure your airplane configuration is correct ? For example, is the front catering door assigned to the front catering service ? If they are reversed, something like that could happen.

Title: Re: Catering Crew Path Limits??
Post by: fernandito on January 07, 2021, 03:41:36 pm

Yes Sir they are set correctly! 8).....Front and Back....It happens as well when flying a CRJs  :-\

Title: Re: Catering Crew Path Limits??
Post by: trisho0 on January 07, 2021, 11:18:59 pm

Quote from: fernandito on January 03, 2021, 11:22:08 pm

Hello Folks;
Any way or remedy available to set the catering crew figure to remain within the aircraft fuselage without crossing over outside out the other door?. This same thing also happens with the AES CRJs aircrafts. Any thoughts or suggestions?

Regards
Fernando R.

I have a similar issue with A2A Connie L-049 Constellation. I have the Connie configuration found in here GSX forum and the GSX Crew cross the Bird to enter, same as your. The crew doesn't cross all the way to the other side of the plane as your pictured.
You need the Aerosoft aircraft configuration.
Patricio

Title: Re: Catering Crew Path Limits??
Post by: virtuali on January 09, 2021, 01:11:13 pm

The perspective in your screenshot is not helping me understanding what the problem really is. I assumed the catering guy was going in the opposite direction, but maybe you were saying something else.

Title: Re: Catering Crew Path Limits??
Post by: fernandito on January 09, 2021, 03:06:31 pm

@virtuali....As you can see on the screenshot the catering guy enters R4 Door and walks out through the other side at L4 Door position. This also happens when using the AES-CRJs at R1 Door when Catering. Its there any remedy that exist to prevent this from happening while using both of this vehicles (CRJ & Concorde).

Title: Re: Catering Crew Path Limits??
Post by: fernandito on March 22, 2021, 08:49:49 pm

Hi;
Just doing a quick follow up on this post. Has any resolution emerged to fix this bug? ???

Regards
FRL