FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: masmaz on November 11, 2020, 10:00:11 pm
-
Hi,
I have read several posts about this problem .. I have tried some configurations but without getting a result: the exit 2 cannot be opened .... below my current situation:
file gsx.cfg in: C:\Users\Administrator\AppData\Roaming\Virtuali\Airplanes\ProSim737-800-2019-PBR Professional
[aircraft]
nosegear = 13.70
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 1.74 -4.32 1.22
wingtippos = 17.37 -8.23 1.22
fuelpos = -12.52 -4.53 0.54
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
gpupos = 0.00 0.00 0.00
engine1pos = -4.91 2.50 -0.90
engine2pos = 4.91 2.00 -0.90
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.68 12.23 -0.01 0.00
code = 1
name = Exit 1
embeddedStair = 0
[exit2]
pos = -1.68 12.23 -0.01 0.00
code = 0
embeddedStair = 0
[exit3]
remove = 1
[exit4]
pos = -1.49 -14.54 0.30 -6.00
code = 1
name = Exit 1
embeddedStair = 0
[service1]
pos = 1.68 12.73 -0.00 -0.00
code = 0
embeddedStair = 0
[service2]
pos = 1.49 -14.54 0.05 -0.00
code = 0
embeddedStair = 0
[cargo1]
pos = 0.95 8.71 -0.86 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 1.03 -10.55 -0.95 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = AUTO
[cargomain]
remove = 1
file gsx.cfg in : C:\Users\Administrator\Documents\Prepar3D v5 Add-ons\ProSim-AR\Simobjects\Airplanes\ProSim737-800-2019-PBR Professional\Extras\GSX
[aircraft]
nosegear = 13.70
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 1
iscargo = 0
trafficcones = 1
preferredexit = 0
wingrootpos = 1.74 -4.32 1.22
wingtippos = 17.37 -8.23 1.22
fuelpos = -7.25 -2.75 -0.01
waterpos = 0.00 0.00 0.00
lavatorypos = 0.00 0.00 0.00
gpupos = 0.00 0.00 0.00
engine1pos = -4.91 0.00 -1.16
engine2pos = 4.91 0.00 -1.16
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.68 12.23 -0.01 0.00
code = 1
name = Exit 1
embeddedStair = 0
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -1.74 -14.54 0.05 0.00
code = 1
name = Exit 1
embeddedStair = 0
[service1]
pos = 1.68 12.73 -0.00 -0.00
code = 0
embeddedStair = 0
[service2]
pos = 1.49 -14.54 0.05 -0.00
code = 0
embeddedStair = 0
[cargo1]
pos = 1.45 8.46 -0.86 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 1.53 -10.80 -0.70 0.00
code = 2
name = Exit 2
embeddedStair = 0
uldcode = AUTO
[cargomain]
remove = 1
neither of them works the error persists ... so what to do?
regards
max
-
I'm not sure if this has anything to do with your error, but it looks like for both exits in both configurations, you have "name = Exit 1", and for both cargo doors, you have "name = Exit 2". Screenshot of the exact error message would help.
-
I'm not sure if this has anything to do with your error, but it looks like for both exits in both configurations, you have "name = Exit 1", and for both cargo doors, you have "name = Exit 2". Screenshot of the exact error message would help.
did you mean these?
-
did you mean these?
-
I'm talking about the configuration files you posted in your initial post. Ideally, you want one marked Exit 1, one parked Exit 2, one marked Forward Cargo, and one marked Aft Cargo. You have both your passenger doors marked Exit 1 and both your cargo doors marked Exit 2.
-
Max,
Will post my two gsx.cfg files I use for Prosim and P3D v4.5. They open all doors using the Tab+Door number keys when using the doors lua file in the modules folder. Not sure about P3D v5. Buy maybe this will help?
Mark
here is my gsx.cfg located in Users\Username\appdata\roaming\virtuali\airplanes\ProSim737-800-2019-PBR Professional Folder.
[aircraft]
nosegear = 13.29
refueling = 1
battery = 1
pushbackraise = 1
pushbackdummyevent = 0
pushbackcheckengines = 0
iscargo = 0
trafficcones = 0
preferredexit = 3
wingrootpos = 2.74 -1.32 -0.03
wingtippos = 16.12 -6.28 1.33
fuelpos = 14.52 -5.69 0.97
waterpos = 0.75 -16.75 -0.01
lavatorypos = 1.00 -15.25 -0.01
gpupos = 0.83 14.75 -0.74
engine1pos = -4.76 2.37 -1.15
engine2pos = 4.75 2.26 -1.15
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.67 12.30 0.31 7.10
code = (L:738_door_0, number) 1*
name = Fwd Pax
embeddedStair = 0
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -1.43 -14.50 0.29 -10.80
code = (L:738_door_1, number) 1*
name = Aft Pax
embeddedStair = 0
[service1]
pos = 1.64 12.67 0.35 -8.30
code = (L:738_door_2, number) 1*
name = Fwd Service
embeddedStair = 0
[service2]
pos = 1.46 -14.47 0.29 10.20
code = (L:738_door_3, number) 1*
name = Aft Service
embeddedStair = 0
[cargo1]
pos = 0.89 8.78 -1.08 -1.10
code = (L:738_door_4, number) 1*
name = Fwd Cargo
embeddedStair = 0
uldcode = AUTO
[cargo2]
pos = 0.90 -10.49 -1.01 9.40
code = (L:738_door_5, number) 1*
name = Aft Cargo
embeddedStair = 0
uldcode = AUTO
[cargomain]
remove = 1
Here is my GSX.CFG in the Users\username\documents\Prepar3d v4 Add-Ons\Prosim-AR\Simobjects\Airplanes\Prosim737-800-2019-PBR-Professional\Extras\GSX
[aircraft]
nosegear = 13.29
refueling = 1
iscargo = 0
trafficcones = 1
preferredexit = 3
wingrootpos = 2.74 -1.32 -0.03
wingtippos = 16.12 -6.28 1.33
fuelpos = 2.02 -3.94 -0.50
waterpos = 0.75 -16.75 -0.01
lavatorypos = 1.00 -15.25 -0.01
engine1pos = -4.76 2.37 -1.15
engine2pos = 4.75 2.26 -1.15
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00
[exit1]
pos = -1.67 12.30 0.31 7.10
code = (L:738_door_0, number) 1*
name = Fwd Pax
[exit2]
remove = 1
[exit3]
remove = 1
[exit4]
pos = -1.43 -14.50 0.29 -10.80
code = (L:738_door_1, number) 1*
name = Aft Pax
[service1]
pos = 1.64 12.67 0.35 -8.30
code = (L:738_door_2, number) 1*
name = Fwd Service
[service2]
pos = 1.46 -14.47 0.29 10.20
code = (L:738_door_3, number) 1*
name = Aft Service
[cargo1]
pos = 0.89 8.78 -1.08 -1.10
code = (L:738_door_4, number) 1*
name = Fwd Cargo
uldcode = AUTO
[cargo2]
pos = 0.90 -10.49 -1.01 9.40
code = (L:738_door_5, number) 1*
name = Aft Cargo
uldcode = AUTO
[cargomain]
remove = 1