FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: reginald123456 on November 27, 2019, 08:57:26 pm
-
I took a break from flight sims for a few months, but when I came back and installed GSX it seems that all the ground vehicles with an exception of the crew transport van, are invisible despite this not being an issue before. The only visible parts of the vehicles being the name of the company on the vehicles, shadows, and the personal themselves. Also no sign of a Marshaller and numbers for when i'm taxiing in. I updated my drivers, have done a clean uninstall and reinstall of GSX possibly over 7 times, and this is an issue that has been apparent for days after many computer restarts. I noticed after some other people were talking about the same issue that they noticed the installer only goes to around 140 steps out of 340+ steps in the automatic installer. I decided to do a clean install once more and keep an eye on the installer which it got to around 147 steps and completed out of 340 steps which I believe is the culprit. If there is a fix or any possible way to manually install GSX that would probably be a solution. There will be a pic of what it looks like in my Boeing 747-8 at KATL South Ramp. Also my anti virus is disabled for all times I attempted install.
-
The updater will never complete all the steps, unless you have each and every FSDT product installed so no, there are no problems with the updater
If only some objects are missing or parts are missing, it's usually a problem of video memory corruption so, you might try all all these:
- Reset your video driver to default
- If that doesn't work, try to delete your FSX.CFG, so a new one will be created with all default settings. Apply only the HIGHMEMFIX = 1 tweak and nothing else, if you use FSX.
- If that doesn't work, be sure you are not running the sim or any of the addons that starts with it in Compatibility mode.
After resetting the FSX.CFG, you must reinstall GSX, otherwise it won't find its own Simobjects, because the FSX.CFG must be edited by the GSX installer.
-
The updater will never complete all the steps, unless you have each and every FSDT product installed so no, there are no problems with the updater
If only some objects are missing or parts are missing, it's usually a problem of video memory corruption so, you might try all all these:
- Reset your video driver to default
- If that doesn't work, try to delete your FSX.CFG, so a new one will be created with all default settings. Apply only the HIGHMEMFIX = 1 tweak and nothing else, if you use FSX.
- If that doesn't work, be sure you are not running the sim or any of the addons that starts with it in Compatibility mode.
After resetting the FSX.CFG, you must reinstall GSX, otherwise it won't find its own Simobjects, because the FSX.CFG must be edited by the GSX installer.
I noticed this trick being used before, but I have no idea how to set my video driver to default, delete FSX.CFG (I am on P3D so idk if it's the same for P3D), and I think I'm sure I'm not running anything in compatibility mode.
-
delete FSX.CFG (I am on P3D so idk if it's the same for P3D), and I think I'm sure I'm not running anything in compatibility mode.
I gave you the FSX solution, because this problem is way more common in FSX. Had you said you used P3D, I would gave the P3D solution, which is entirely different, and it's rebuilding the Shaders, by removing this folder when the simulator is NOT running:
%LOCALAPPDATA%\Lockheed Martin\Prepar3D v4\Shaders
Start the sim, wait a minute ( with a black screen, it's normal, don't panic ) until all the objects will eventually come back.
-
delete FSX.CFG (I am on P3D so idk if it's the same for P3D), and I think I'm sure I'm not running anything in compatibility mode.
I gave you the FSX solution, because this problem is way more common in FSX. Had you said you used P3D, I would gave the P3D solution, which is entirely different, and it's rebuilding the Shaders, by removing this folder when the simulator is NOT running:
%LOCALAPPDATA%\Lockheed Martin\Prepar3D v4\Shaders
Start the sim, wait a minute ( with a black screen, it's normal, don't panic ) until all the objects will eventually come back.
My apologies for not confirming that it was P3D instead of FSX, but it does seem that the issue hasn't changed despite me deleting the shaders folder with the simulator closed.
-
My apologies for not confirming that it was P3D instead of FSX, but it does seem that the issue hasn't changed despite me deleting the shaders folder with the simulator closed.
Are you using a 3rd party shader mod, like Tomatoshade, etc ?
-
My apologies for not confirming that it was P3D instead of FSX, but it does seem that the issue hasn't changed despite me deleting the shaders folder with the simulator closed.
Are you using a 3rd party shader mod, like Tomatoshade, etc ?
I am not.
-
I am not.
Are you sure, the colors in your screenshot looks a bit strange.
-
I am not.
Are you sure, the colors in your screenshot looks a bit strange.
I am. This is due to the fact I changed my bloom and lighting settings a bit since I think it makes the sim look a lot more alive than the default lighting.
-
I am. This is due to the fact I changed my bloom and lighting settings a bit since I think it makes the sim look a lot more alive than the default lighting.
Which is the exact version of the simulator ? If you updated to it using only the Client, it might not be enough for PBR content, you must update also the Content.
-
I am. This is due to the fact I changed my bloom and lighting settings a bit since I think it makes the sim look a lot more alive than the default lighting.
Which is the exact version of the simulator ? If you updated to it using only the Client, it might not be enough for PBR content, you must update also the Content.
I am running 4.5.13.32097. I do not know how to update the content.
-
I am running 4.5.13.32097. I do not know how to update the content.
Go into your LM account, select Downloads and look for the Content installer.
-
I am running 4.5.13.32097. I do not know how to update the content.
Go into your LM account, select Downloads and look for the Content installer.
Okay I have ran the installer with the sim closed, and it has completed successful, but nothing has changed It seems.
-
Okay I have ran the installer with the sim closed, and it has completed successful, but nothing has changed It seems.
Try to reset your settings to default, by removing this file:
%APPDATA%\Lockheed Martin\Prepar3d v4\Prepar3d.cfg
-
Okay I have ran the installer with the sim closed, and it has completed successful, but nothing has changed It seems.
Try to reset your settings to default, by removing this file:
%APPDATA%\Lockheed Martin\Prepar3d v4\Prepar3d.cfg
Deleted, and I can confirm it has reset my settings, but to no effect to the problem itself unfortunately.
-
Deleted, and I can confirm it has reset my settings, but to no effect to the problem itself unfortunately.
I'm sorry but, you are the one and only ever reported this problem on P3D. It only happened on FSX and, even there, it was never a GSX problem and it was fixed in 100% of the cases in one of the way I already indicated in my first reply.
That's why I assumed you used FSX, since in several years GSX is out, nobody ever reported this in P3D so, clearly, something must be wrong in your installation. You can try uninstalling and reinstalling using the Full installer, most likely the separate Client+Content install didn't go well.
-
Deleted, and I can confirm it has reset my settings, but to no effect to the problem itself unfortunately.
I'm sorry but, you are the one and only ever reported this problem on P3D. It only happened on FSX and, even there, it was never a GSX problem and it was fixed in 100% of the cases in one of the way I already indicated in my first reply.
That's why I assumed you used FSX, since in several years GSX is out, nobody ever reported this in P3D so, clearly, something must be wrong in your installation. You can try uninstalling and reinstalling using the Full installer, most likely the separate Client+Content install didn't go well.
Interesting. I'll try your last method of fixing it along with trying my best to fix it as well and will comment back when I figure out the solution along with how I fixed it. Thanks for sticking with me, and hopefully will be commenting back soon.