FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: Er!k on September 08, 2018, 08:51:31 am
-
Just did my first flight with GSX level 2. From LIPE to LDPL with the Aerosoft A319 in P3Dv4.3. Passengers and cargo/luggage succesfully boarded at LIPE, but at LDP only the cargo/luggage appears. For the passengers the bus arrives, but I do not see any people leave the plane. Any clue?
-
Hello,
I have the same problem where the passsenger bus isn't available because the passengers have to be leave the plane on foot. No animation!
Can you please check this?
Thx in advance!
Zoli
-
I believe the PAX animation is for Boarding only, you revert back to the standard GSX for de-boarding.
-
No, the animated deboarding is also part of the level2 expansion.
-
Passengers won't appear if the parking has been set with the "No Passenger bus" option in the GSX customization that might have been made by the scenery developer.
This is normal and it's the expected behavior, until we'll set up a system to create passenger walking paths to the terminal, which cannot be made generically so, it will require quite extensive customization.
-
Passengers won't appear if the parking has been set with the "No Passenger bus" option in the GSX customization that might have been made by the scenery developer.
This is normal and it's the expected behavior, until we'll set up a system to create passenger walking paths to the terminal, which cannot be made generically so, it will require quite extensive customization.
Hi Umberto, as you can see in my topic start, the bus appears, but passengers are *not* deboarding... It is a parking with bus assigned.
-
I have this same bug as well, and no the scenery does not have any walk in gates, it has a shuttle which came but the pax are just stuck in the cabin, i reset gsx and requested for de boarding again and then the pax deboarded..
-
deboarding not working but can hear deboarding sounds..people just stuck inside
-
I'm sorry, but I cannot replicate the problem. The usual question is: does it work on a default airport ? This doesn't mean in any way GSX requires a default airport, but it's the first troubleshooting step to understand if there's a problem related to the airport itself.
-
I tried it at T2G Doha and ARMI projects Muscat in p3d v4.3, Pax only start getting off the aircraft (FSL A319) After I "reset position" in gsx menu and then put in the wieghts again and then request for deboarding.. so clearly they do de-board but not without resetting gsx back, pic attached
-
Please clarify. Are you saying that passengers deboard as soon as GSX starts or it's restarted, but not after doing another operation, like a previous boarding, for example ?
-
So for example i came in from Muscat into Doha, parked on stand and then requested deboarding, the baggage carts have arrived, and they have unloaded the baggage, and then the shuttle bus comes in to pic the pax up, the shuttle opens up the door, but the pax do not deboard the aircraft they just stand into each other as shown in the image, but then I pressed "reset position" in GSX menu, and gsx unloads as usual, after that I request for deboarding again same stuff, but this time the pax deboard into the shuttle as it should happen.
-
I can confirm this since I am not the only one, it is also happening with many more people..
-
I can confirm this since I am not the only one, it is also happening with many more people..
I'm not denying it can happen.
I only ASKED if this is how it's possible to reproduce it because, it's a very different thing (and a totally different investigation process on our side), saying "deboarding doesn't work", or saying "deboarding doesn't work only on arrival".
-
To reproduce-
1. Do a flight from A to B with gsx Catering, and boarding. (FSLabs a319) (Passenger density in GSX "very dense")
2. When you reach at B park up at a stand which does not have jetways
3. Request gsx for deboarding after turning engines off
4. wait for the baggage to unload and the shuttle bus to arrive and to open it's doors
5. go inside the cabin of the aircraft and check if the passengers are piling up or not..
for me the pax were piling up and not de-boarding. so i reset gsx's position and entered in my ZFW agin in the aircraft and requested for deboarding after which the pax started to de baord the a/c hope this helps..
-
and also for the places where pax walk in/out of the airport directly to/from the aircraft, can you guys develop a simple way so that we can just manually add the route to GSX?
-
To reproduce-
1. Do a flight from A to B with gsx Catering, and boarding. (FSLabs a319) (Passenger density in GSX "very dense")
2. When you reach at B park up at a stand which does not have jetways
3. Request gsx for deboarding after turning engines off
4. wait for the baggage to unload and the shuttle bus to arrive and to open it's doors
5. go inside the cabin of the aircraft and check if the passengers are piling up or not..
for me the pax were piling up and not de-boarding. so i reset gsx's position and entered in my ZFW agin in the aircraft and requested for deboarding after which the pax started to de baord the a/c hope this helps..
I also set the density to very dense. Maybe other settings work fine?!
-
To reproduce
Please run the FSDT Live Update now, because we posted a fix for this.
-
okay thanks!
-
okay thanks!
still the same bug even after running the live update..pax not getting off..
-
Pic attached..
-
Tested it by doing a flight from EGKK to LFBZ and back, uk2000 EGKK and Simzaleak LFBZ, Deboarding was fine when I landed into LFBZ, but after doing the return and landing back into EGKK my pax were not deboarding they were just stuck inside the cabin (pic attached) FSLA319, And this time I did a fresh install of gsx v2 redownloaded the installer and ran it again today..
-
Same for me. Bus there, sounds there but no pax deboarding.
-
btw can you guys (whoever has this same problem mention what aircraft you are using? with it's developer as well, for example FSlabs a319 etc)
So that it's easier for the developers to fix the issue..
-
Same here with MJC Dash8 Q400 at LIEE Cagliari airport today ...
-
We found the problem, and it was caused by missing passenger parameters in the smaller stair used by the smaller planes. It's fixed now, by running the FSDT Live Update.
-
thanks!
-
I ran the latest update and the passengers are still in the cabin. Gate 12 LIRN with Menzies handling. FSLabs A319. I reset the position and tried again. This time the crew bus arrived and six ordinary passengers (not crew in uniform) got into the crew bus. This bus departed and another crew bus arrived. (I'm typing this as I watch). Bus doors open. 4 females cabin crew disembark followed by Captain and First Officer. Crew Bus departs. Interesting. :)
-
I ran the latest update and the passengers are still in the cabin. Gate 12 LIRN with Menzies handling. FSLabs A319.
Your problem never had anything to do with the issue discussed here, which was a specific problem with the smaller staircase that are used only on Dash-8 or smaller planes, and this caused GSX to freeze entirely.
I reset the position and tried again. This time the crew bus arrived and six ordinary passengers (not crew in uniform) got into the crew bus. This bus departed and another crew bus arrived. (I'm typing this as I watch). Bus doors open. 4 females cabin crew disembark followed by Captain and First Officer. Crew Bus departs
This only seems to indicate the passenger number was too low. With the FS Labs, it's the airplane that controls the passenger number and communicate it to GSX. I believe FS Labs have said on their forum this process is not entirely bug-free, so a fix from them should arrive.
However, if you disable the "Estimate Passengers Number" option in the GSX settings, you can override what the airplane might have sent to GSX.
-
nah it's not to do with fslabs, whenever you request for deboarding and then reset the positions fslabs will reset the ZFW inpayload back to 0 and consider itself deboarded, so whenever asking for deboarding again by I first put my original ZFW inside and then request for deboarding and it happens but only after resetting position, I have been giving you guys pictures of pax getting stuck in the cabin, i dont know what else do you guys want to believe that it is actually a big bug lol
-
I ran the latest update and the passengers are still in the cabin. Gate 12 LIRN with Menzies handling. FSLabs A319. I reset the position and tried again. This time the crew bus arrived and six ordinary passengers (not crew in uniform) got into the crew bus. This bus departed and another crew bus arrived. (I'm typing this as I watch). Bus doors open. 4 females cabin crew disembark followed by Captain and First Officer. Crew Bus departs. Interesting. :)
when you reset position fslabs empties itslef automatically as it also happens when requesting for boarding..so obviously you would get no pax at all since there are no pax numbered in the payload settings at it has reset to 0, but still the problem lies uner fsdt gsx v2, have to reset position everytime, I have not really been enjoying the product, more of reporting various bugs lol
-
the problem is with fslabs a319 as well guys! it's not only the dash q400 as I have told you above!
-
with the fslabs a320 it works fine but not with the fslabs a319 it seems there is a bug there.
-
I am having the same problem. With any major airport LGW, EMA, LBA,MAN where I do not use a Jetway. The bus arrives and no PAX get off or on.
Is there a solution, fix or something we have to adjust in GSX V2?
If you could point us in the right direction as I am sure I am not alone here.
Thank you
Simon
-
^ you use fsl a319? what aircraft?
-
Same problem with PMDG737, When park at the gate without jetway, Bus arrived but no passenger de-boarding. VTBD, VTCC, VTSP. But when park at RJBB with jetway everything is good.
-
I am having the same problem. With any major airport LGW, EMA, LBA,MAN where I do not use a Jetway. The bus arrives and no PAX get off or on. Is there a solution, fix or something we have to adjust in GSX V2?
It seems you are listing only UK2000 airports. Can you please try on a default airport ? If that works, then maybe there's a problem with the scenery AFCAD so, check the name of the AFCAD used by GSX at the problematic airports, which is listed in the airport customization page.
-
T2G Doha, FlyTampa EKCH, LFBZ (Simlaek) I do not think these airports have any afcad issues, and this is happening to me only with the FSL A319
-
this is happening to me only with the FSL A319
Does it means it doesn't happen with other airplanes ? If you read the FS Labs forum, they are aware there are still issues on their side in relationship of the connection with GSX (which is different than any other airplane), and have promised a fix.
-
tried what you said - nothing.
Here may be a clue. When I select the 'GSX Activate Ground' Deboarding it only shows 'pilot and cargo' in the debourding process - passengers are not even mentioned.
I still do not get the bus arriving and taking the pax away.
I used stand 17 at LEIB which has no jetway.
Any idea?
-
tried what you said - nothing.
Here may be a clue. When I select the 'GSX Activate Ground' Deboarding it only shows 'pilot and cargo' in the debourding process - passengers are not even mentioned.
I still do not get the bus arriving and taking the pax away.
I used stand 17 at LEIB which has no jetway.
Any idea?
have you update GSX to the latest version? came out yesterday.. and also some airports do not have shuttle bus coming to pick up the pax that might be a reason only the pilot and cargo comes out..since GSX has decided to not make pax walking directly to the gate sadly..hope that is a planned update
-
Passengers won't appear if the parking has been set with the "No Passenger bus" option in the GSX customization that might have been made by the scenery developer.
This is normal and it's the expected behavior, until we'll set up a system to create passenger walking paths to the terminal, which cannot be made generically so, it will require quite extensive customization.
Hi,
I hope, this will be happen one day as it is quite normal on many many smaller airports, that you just walk to the terminal. I understand, though, that this is not an easy change. But maybe it can be used for the bus routes as well?!
-
Hi.
I have tried everything mentioned in this post. The crew bus arrives and co/pilot/steward gets out of this very small bus and that's it. baggage loaded, crew on board but still no bus with PAX arrive.
Tried the new update - nothing, tried random airport like BFS which I do not have any add on scenery, no gate just stand 15. Nothing. I have even re installed GSX2.
Basically no bus turns up.......
suggestions
Thanks
-
Facing the same issue but it seems to happen randomly with no fixed onset of conditions.
I've tried it with the PMDG 777, CS 757 and Majestic Q400.
Flying out of FlyTampa Vienna with a jetway stand, jetway docks, no passengers seen boarding. Same flight at destination T2G Doha and passengers deboard fine on a non-jetway stand.
Flying out of MK Studios Lisbon without a jetway stand, bus arrives, doors open, no passengers board. Same flight at destination AS Madeira Evolution and passengers deboard fine on a non-jetway stand.
Flying out of FlyTampa Athens without a jetway stand, bus arrives, doors open, passengers board. Same flight at destination ORBX Dubrovnik and passengers do not deboard on a non-jetway stand.
Then there are times when it would work perfectly at both departure and destination airports with the same aircraft above. I can't find a consistent fault so it's very difficult to reproduce, even for me, but there's definitely something that bugs out within GSX.
-
Hi.
I have tried everything mentioned in this post. The crew bus arrives and co/pilot/steward gets out of this very small bus and that's it. baggage loaded, crew on board but still no bus with PAX arrive.
Tried the new update - nothing, tried random airport like BFS which I do not have any add on scenery, no gate just stand 15. Nothing. I have even re installed GSX2.
Basically no bus turns up.......
suggestions
Thanks
These are cargo stairs no? Is cargo plane ticked in your aircraft customization page?
-
Success!! thank you - the plane config was checked 'cargo' which I would have never have found.
All is well.
Thank you again
Simon
-
Hah, you're welcome!
-
Same problem with PMDG737, When park at the gate without jetway, Bus arrived but no passenger de-boarding. VTBD, VTCC, VTSP. But when park at RJBB with jetway everything is good.
I have this exact issue. Just landed at KLGB and the baggage is unloaded just fine. However when the bus arrives and the stairs mount on the aircraft, no passengers walk out. I am using p3dv5 hf1
-
I have this exact issue. Just landed at KLGB and the baggage is unloaded just fine. However when the bus arrives and the stairs mount on the aircraft, no passengers walk out. I am using p3dv5 hf1
You are replying to a very old post and, in that post, the problem was the airplane flagged as Cargo so, the first thing to check in your case is this one.
If that's not your case, you should provide with more precise information. You don't say anything about that KLGB scenery. Is default or 3rd party ? If it's not default, which scenery is ? And, you don't say if you have GSX L2 active, and you don't say if that problem is happening only on THAT airport, or elsehwere.