FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: Rikypara on May 22, 2018, 07:06:58 pm
-
Hello,
FSX:SE today I’ve run the update, with LKPR Aerosoft and LIMC Aerosoft baggage unloading doesn’t start when disembarking.
After leaving the runway I select my parking gate, I don’t request follow me and if possible select the ground operator (Sea for MXP, default for PRG). After set parking brake call for disembark but I notice the truck with all the bags (don’t know the technical name as english is not my native language) doesn’t approach the plane (while stairs do). And GSX menu never ask me to open the cargo doors. It goes straight to open pax doors.
After disembarking is completed, baggage unloading in progress remains until I restart Couatl...
Cheers
Sent from my iPhone using Tapatalk
-
I am having the same issue at every arrival airport.
-
Please check if this is fixed if you restart Couatl before landing.
-
I have just tried and it doesn’t work. Still no baggages unloading....
-
Please describe the precise reproduction steps:
- The airplane used.
- The airport used
- The gate used
- The order of operations you chose in GSX
-
Agree. No success even for me.
Here the details:
- A320 FSLabs for FSX:SE
- the issue so far at : MXP (Aerosoft), PRG (Aerosoft), CFU (FlyTampa)
- Start FSX, call for deboarding with either full or empty aircraft. Everything works with cargo doors opened when required to, then pax doors.
When ready call for boarding. Then depart. Never use catering and refuel.
Fly, today I restarted Couatl during descent to CFU, otherwise no touch to couatl.
On ground after rwy vacated select parking and ground staff (never use of warp me there or follow me). Parking, then call for deboarding and cargo loaders don’t approach the plane at this point.
If I save the flight before asking deboarding, when I open back flightsim it works properly when I call deboarding. Next flight I try to restart couatl on ground, before disembarking and at the gate
Sent from my iPhone using Tapatalk
-
Gate used in PRG: 30, in MXP: 115, CFU: 7
Sent from my iPhone using Tapatalk
-
Could you please try a default airport, with a default airplane ?
-
Sure! I’ll try a quick circuit using GSX as I do on a normal flight (both preflight and post flight).
For the moment I can confirm that If I restart Couatl after parking it works properly
Sent from my iPhone using Tapatalk
-
Quick update:
With the default airbus and default airport of Malpensa. It doesn’t work without restarting but If I restart any point after leaving the gate on departure it works.
Tried also in OLB Aerosoft with A320 FSLabs and after restarting this time worked normally. I think that if I don’t restart Couatl it doesn’t work, if I restart it’s likely it works.
Sent from my iPhone using Tapatalk
-
Run the FSDT Live Update now, the problem should be fixed.
-
Run the FSDT Live Update now, the problem should be fixed.
Hi Umberto, just tried with FlyTampa Copenaghen and A320 FSLabs. Still not working. Before the Update the bagagge car didn’t move and the cargo loaders approached the holds. Now there is no baggage car and the cargo loaders remains on the side (as when boarding is completed).
I’ll try again tomorrow
Sent from my iPhone using Tapatalk
-
I'm on the same boat here, for me happens with multiple payware A/C and scenery. After awhile from selecting deboard, Couatl with crash and ask for a restart. Also for me restarting couatl after departure this does not happen.
-
I tried it, and I can only repeat and confirm the problem should be fixed by the latest update. Please try it again.
If it doesn't work, please describe the PRECISE, EXACT sequence of operations you did in GSX, in their precise order.
-
It's the same here with the pmdg 737 ngx and prepar3d V4.2.
It happens at different airports, also standard scenery.
I will check the newest update and report this evening.
Until yesterday the baggage unloading didn't work.
-
I do confirm Umberto.
Usually for all flights. Start flight disembark (just to make the stairs approach the plane), boarding, push back.
Vacating runway, call for the gate, handler and never the follow me.
At the gate, call for disembark. No belt is approaching the plane, they remain far (as when boarding is completed)
-
The issue you are having, are related to the arrival only ?
-
The issue you are having, are related to the arrival only ?
Yep, only the arrival. But after the update, if I restart Couatl somewhere during the flight it works correctly
Sent from my iPhone using Tapatalk
-
I also tested it now again, after the update.
It's still the same. Baggage unloading never starts, the cargo loaders do not drive to the airplane and don't reach it.
It all works fine if I do a restart of couatl after I landed on the arrival airport.
-
Any update?
-
I have the same problem
-
Is this the same problem discussed here ?
http://www.fsdreamteam.com/forum/index.php/topic,17925.45.html
If yes, please post in that thread.
-
No it is not. You see this by reading the first post.
The link you send is about boarding problems. This topic here is about deboarding problems.
-
No it is not. You see this by reading the first post. The link you send is about boarding problems. This topic here is about deboarding problems.
If you have it only at arrival, it means it might still be a boarding problem, the boarding you made on departure so yes, it's possible the issues might be related.
-
No it is not. You see this by reading the first post. The link you send is about boarding problems. This topic here is about deboarding problems.
If you have it only at arrival, it means it might still be a boarding problem, the boarding you made on departure so yes, it's possible the issues might be related.
Ok Umberto,
Let’s say it might be a related problem. So what do you suggest? In my understanding it would complicate the „two“ topics if I am going to start posting the baggage unloading problems in the topic linked by you. Because no one talked about the deboarding and baggage unloading problems at this topic yet...
-
I've been having the same problem. So I Uninstalled GSX and installed a slightly older version of GSX and the loading and unloading works perfectly.
-
I've been having the same problem. So I Uninstalled GSX and installed a slightly older version of GSX and the loading and unloading works perfectly.
Sounds interesting.
Where can I get older versions of GSX?