FSDreamTeam forum

Products Support => GSX Support FSX/P3D => Topic started by: yuraco on November 20, 2016, 07:03:02 pm

Title: Error after uninstall and install GSX
Post by: yuraco on November 20, 2016, 07:03:02 pm

hi  I need help to solve this

I purchased GSX on Sept 7th, it works perfect until 4 days ago, I uninstalled and install again GSX before the problem.

GSX loads ok in FSX , I can see GSX and the addon manager in the FSX menus.
When I load the trike on any airport , no problem.

I 'm getting the message " the addon "unknown" is causing couatl scripting engine to restart   when I load the FSL A320x or PMDG or any addon aircraft.

all that I readed in the forum doesnt work:
Antivirus off and the entire FSX folder on exception
I reinstalled the GSX with full installer
I reinstalled the addon manager
I uninstalled and reinstalled the GSX 6 or 7 times


here my logs

when I loaded the fsl a320x
couatl v3.1 (build 3536)
panic log started on Sun Nov 20 14:49:42 2016

problem raised by engine or unspecified addon
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone1'
Traceback (most recent call last):
  File "couatl\GSX\__init__.py", line 698, in onSimStart
  File "couatl\GSX\__init__.py", line 682, in checkOnGroundState
  File "couatl\GSX\assistanceServices\__init__.py", line 1380, in aircraftEngaged
  File "couatl\GSX\assistanceServices\__init__.py", line 1439, in materializeTrafficCones
AssertionError: attempt to use an invalid SimObject instance
{'Airport': 'SCEL', 'User Pos': (-33.396083526555714, -70.79619096591635, 478.086 m, 4.38179 m, 176.79957192525018)}

When I loaded PMDG 737


couatl v3.1 (build 3536)
panic log started on Sun Nov 20 14:53:35 2016

problem raised by engine or unspecified addon
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_Traffic_Cone2'
Traceback (most recent call last):
  File "couatl\GSX\__init__.py", line 698, in onSimStart
  File "couatl\GSX\__init__.py", line 682, in checkOnGroundState
  File "couatl\GSX\assistanceServices\__init__.py", line 1380, in aircraftEngaged
  File "couatl\GSX\assistanceServices\__init__.py", line 1439, in materializeTrafficCones
AssertionError: attempt to use an invalid SimObject instance
{'Airport': 'KMCI', 'User Pos': (39.293727777705435, -94.7123583332798, 315.192 m, 2.46758 m, 320.032317170444)}

Please help
thanks

Yuraco

Title: Re: Error after uninstall and install GSX
Post by: virtuali on November 21, 2016, 08:45:31 am

Quote from: yuraco on November 20, 2016, 07:03:02 pm

I purchased GSX on Sept 7th, it works perfect until 4 days ago, I uninstalled and install again GSX before the problem.

Since you said you bought it very recently, it doesn't seem a problem of using an outdated installer, since the Traffic Cones are surely included in your installer.

It seems, some OTHER product (or you, if you hand-edited the file) has corrupted your FSX.CFG, removing some needed lines in the Simobjects paths, so GSX cannot find its objects anymore, and of course you are now missing a whole lot of default library objects too.

See here:

http://www.fsdreamteam.com/forum/index.php/topic,10245.msg80149.html#msg80149