FSDreamTeam forum
Products Support => Vancouver CYVR support FSX/P3D => Topic started by: Simpilotguy on January 19, 2013, 01:28:09 am
-
Hi there,
Was installing CYVR and install stopped with this error:
Creating temporary texture at 0X0 from CYVR_SF01
Incorrect Function
Any ideas?
Thanks.
-
Creating temporary texture at 0X0 from CYVR_SF01
Incorrect Function
This doesn't normally happen, there must be something wrong in your paths, folders or registry keys.
To verify this, you should run the installer in logging mode, by opening a command prompt ( Start->CMD->Enter ) and go to the folder were the installer file is located (cyvr_fsx_setup.exe) , and type the following:
cyvr_fsx_setup.exe /log=log.txt
Run the installer and wait for the error to appear. A log.txt file should have been created in the same folder. ZIP it and Attach it to a post, so I can tell you what's wrong with your system.
-
Thanks for the advice. I will do this and get back to you once I have the log text file.
-
Hi Virtuali,
I am encountering this "Incorrect function" error when trying to install CYVR into P3D v4. Apparently, no one has bothered to create and send you the log file you requested regarding this error and so you've not been able to post a fix. Let me be the first to do so. The log file is attached.
This is actually a series of about 15 or so errors. The errors begin at 17:13:24.206 and can be found by searching on "incorrect".
I look forward to your reply.
Thanks.
Robert
-
Problem solved!
It appears I had downloaded 2 bad install files in a row. After posting, I tried a third download and the installation went fine.
-
I have the same issue only for Vacouver airport
I read this thread and redownload it just now and no luck.. I get thsi error.
There is something wrong with the Vacouver file
-
(https://c1.staticflickr.com/5/4271/34841304290_22bfc9c43e_o.png)
I managed to install pretty much everything
I am unable to install only this
The O'hare I was able to install but the airport elevation is so totally out of wack... not sure what is going on with that.
-
This happened to me when I first tried to install CYVR to both P3d V3 and V4 at the same time. Separate installs (only one checkbox checked)worked fine.
-
That didn't do either for me. v3 and v4 both failed for me with the same message of incorrect function
-
I'm sorry, but I cannot reproduce this error. It's possible it's caused by a bugged antivirus, that is blocking a program that is being launched to generate the textures, which is not obviously a threat, but the well known Graphic Magic open source tool, used by many websites too.
Try to install with the antivirus disabled.
-
I only have MS defender for win 7. I disabled that and tried.. no change.. same issue.
Then I did the following.
I completely uninstalled CYVR. and reinstalled it only for v3 (not for v4) and had the same error. And made sure the Addon folder for v4 did not exist.
I then copied (from my backup HD the CYVR folder (this was the v3 version was fully functional one time before the new file structure change. into a separate folder of my own and added it manually to the scenery.cfg.
within v4, I notice in addon manager that CYVR is installed and active. And the CYVR is visible...all buildings etc, but the ground texture is completely black when I am close to the airport, and look ok when I am away like 20 miles out. Thought this workaround would work..but nope., I am out of ideas.
I own every single FSDT airport now and they all install, except this snarly one. And others have reported the issue.. My take would be , a new build file.
-
I kept hitting OK , OK to everty single popup..about 12 or so...and installed all the way to the end.
Incorrect function
2017-06-11 09:23:48.102 User chose OK.
2017-06-11 09:23:48.103 Executing G:\Addon Manager\gm\gm.exe composite -resize 0x0 CYVR_shdw_ed03_a.jpg CYVR_shdw_ed03.jpg -compose CopyOpacity -resize 0x0 temp.tga from G:\Addon Manager\Simobjects\Misc\FSDT_CYVR\texture.LM\
2017-06-11 09:23:48.461 There has been an error running GM.exe, the result code is : 1 which means Incorrect function
2017-06-11 09:23:48.461 Message box (OK):
Incorrect function
2017-06-11 09:23:48.792 User chose OK.
2017-06-11 09:23:48.793 Executing G:\Addon Manager\gm\gm.exe composite -resize 0x0 CYVR_shdw_ed04_a.jpg CYVR_shdw_ed04.jpg -compose CopyOpacity -resize 0x0 temp.tga from G:\Addon Manager\Simobjects\Misc\FSDT_CYVR\texture.LM\
2017-06-11 09:23:49.145 There has been an error running GM.exe, the result code is : 1 which means Incorrect function
2017-06-11 09:23:49.145 Message box (OK):
Incorrect function
2017-06-11 09:23:49.603 User chose OK.
2017-06-11 09:23:49.615 taskName Updating Live Update cache files
2017-06-11 09:23:50.612 taskName Updating Addon Manager files
2017-06-11 09:23:50.612 cacheFolder set to C:\Users\P3D\AppData\Roaming\virtuali\UpdateCache\
2017-06-11 09:23:50.612 cacheFile set to C:\Users\P3D\AppData\Roaming\virtuali\UpdateCache\fsdtroot.md5
2017-06-11 09:23:50.612 cacheFileName set to fsdtroot.md5
2017-06-11 09:23:50.612 File cache C:\Users\P3D\AppData\Roaming\virtuali\UpdateCache\fsdtroot.md5 loaded
-
Attached the log.txt file here
-
It's possible you have skipped the dialog to select one of the texture resolution options, without clicking on it ?
-
I have also a problem during installation of CYVR. I got additionaly an dx error message from imagetool (I will send a screenshot later).
-
Hi Umberto,
here the screenshot. I don´t know, why the error-message is in german, all my windows settings are in us-en. I tried all texture-resolutions, same result. I´m running Win10 latest Update. All other FSDT-sceneries working well.
-
No ideas what I can do? CYVRs Texture-Folder is nearly empty when I finished the installation. I reinstalled directx in the meantime, same result....
-
The error message indicates you haven't installed the DirectX runtime:
https://www.lifewire.com/fix-d3dx9-34-dll-not-found-or-missing-errors-2623279
-
No it is installed, I have this specific dll found in the system32 folder. The message indicates, it is the wrong version???
Anyway the CYVR Installer itself is running, the Problem seems to be the compiling of the textures during the installation process. Can you upload only the textures (in highest resolution) separately?
-
No it is installed, I have this specific dll found in the system32 folder.
That doesn't mean much. It might not be the correct version or it might not be correctly registered. Try to remove it manually, and install the latest version of the DirectX redistibutable.
Anyway the CYVR Installer itself is running, the Problem seems to be the compiling of the textures during the installation process. Can you upload only the textures (in highest resolution) separately?
Yes, it is compiling textures using an utility which requires DirectX to be properly installed. Which is why, it's best if you fix your DirectX problem first, because it will cause (if it's not already causing) lots of other issue in each and every DirectX game, like crashes, because you have a file, but it doesn't seem the right version.
-
Ok, will try again and come back.
-
The installation of the DX-SDK was the solution. Thanks Umberto!