General Category > Unofficial F/A-18 Acceleration Pack board

DCS A-10C BFT 11 Fly 2 Ship as Wingman

<< < (6/8) > >>

SUBS17:
DCS World MP is very good basically you have many servers with various mission types, there are a few trainning servers which are really good that allow players to train in aircraft on a range doing A/G. Some also allow JTAC/Tanker support and also players can jump in and command vehicles. For A/A there is usually a red and a blue side(already setup in the Mission Editor) and players join either side as a team to defeat the other side. Some servers might be just A/A with F-15Cs vs SU27/33/Mig29s while others are a war with A-10Cs/SU25s doing CAS while the airwar is running often these also have a mix of AI and MP slots so there is still air targets even if no other players are on the server. If a campaign is running upon completion of a mission the campaign generator can automatically load a new campaign so some servers can run for days because of this. Triggers are also used so on the trainning range they can setup a target and if you hit it smoke markers appear to alert you that the range is open and enemy AAA/SAMs are active. Most servers have players who are quite experinced and if a new player joins in they often just ask and people help them out. Squadron missions are the best which is what you saw in that video they used Teamspeak and coordinated their tactics to win the fight.

SUBS17:
Following the BFT course the AFT course is now available.


--- Quote ---A 10 Mission Campaign that covers Advanced Aircraft Training Qualification in the A-10C Warthog.

The A-10C Pilot Qualification Course has the following phases

Phase 1: Academic Classes and Pre-Flight Training
Phase 2: Basic Flight Training Qualification
Phase 3: Advanced Aircraft Training Qualification
Phase 4: Tactical Training Qualification

Phase 1 gives you Initial Qualification Training (IQT) and is a pre-requisite for Phase 2. Hopefully you have completed Phase 1 and are familiar with the A-10C aircraft systems and instruments. If not, please read the A-10C Flight Manual before continuing.

Phase 2 gives you Basic Aircraft Qualification (BAQ).
It is a pre-requisite for Phase 3. It is recommended that you complete that phase before proceeding to Phase 3.

Phase 3 makes you Basic Mission Capable (BAC). It is a pre-requisite for Phase 4.

Phase 4 makes you Combat Mission Ready (CMR). This is necessary before proceeding on any real combat missions.

The goal of the A-10C Pilot Qualification Course is to prepare Cadets for combat operations flying the A-10C in a number of mission roles. Commanders require pilots with the skills and training necessary to be successful on the battlefield.

Each Phase of training will contain individual Performance Objectives (POs) that must be met to pass the course. Performance Checks (PCs) will be used to determine if you have met the requirements of the PO.

Following each flight (known as a Check Ride) your Flight Examiner (FE) will rate you using one of the following proficiency levels as directed in A/OA-10 – Aircrew Evaluation Criteria: AFI11-2A-OA-10V2:
Qualified (Q): Performance is correct. Quickly recognizes and corrects errors.

Qualified Minus (Q-): Performance is safe, but indicates limited proficiency. Makes errors of omission or commission.

Unqualified (U): Performance is unsafe or indicates lack of knowledge or ability.

In addition for any flight missions:

Qualified (Q): Altitude +/- 200 feet, Airspeed +/- 5%, Course +/- 5 degrees / 3 NM (whichever is greater)

Qualified Minus (Q-): Altitude +/- 300 feet, Airspeed +/- 10%, Course +/- 10 degrees / 5 NM (whichever is greater)

Unqualified (U): Exceeded Q- limits

Phase 3 - Advanced Aircraft Training has the following stages:

Advanced Flight Training Stage

AFT01 - Air to Air Refueling Day
AFT02 - Air to Air Refueling Night
AFT03 - Countermeasures and Threat Avoidance
AFT04 - Target Area Ingress Preparation
AFT05 - Illumination Flare Employment

Air to Air Combat Stage:

AAT06 - AA Gun and Missile Employment

Surface Attack Stage:

AAT07 - Gun & Rocket Employment
AAT08 - Unguided Bomb Employment
AAT09 - Guided Bomb Employment
AAT10 - Missile Employment

At the completion of this phase you will be considered Basic Mission Capable (BMC).

Good luck Stud. You are going to need it!

V1.0 Notes:
This is Part A, you will need Part B as well for the full campaign.
File includes a printable A-10C Amplified Checklist pdf in A5 format.

You will need to install a license and purchase a mission key to install these missions.

A mission key can be purchased for $4.99 USD at http://mapleflagmissions.ca

Select the “Request a License or Mission Key” link for details.

Your Mission Key will work for both Part A and Part B of the campaign.

--- End quote ---

SUBS17:
Check this out zzzspace has released a new soundpack for DCS World v2.0
 
http://forums.frugals-world.com/vbb/...nd-all-modules
 
And check out his F-16 soundfx
 
These are just samples the top link is where you can get all the files you need(modman v7.3, modman patch for DCS World and the zzzspace downloads.
 

 zzzspace v2.0 F-16C flybys.ogg (5.14mb)
 http://www.mediafire.com/?l8odjxd0px1g3nl

 zzzspace v2.0 2xMig-29 v 2xF15C guns example.ogg (9.27mb)
 http://www.mediafire.com/download.php?1zdbbchdp4yqqw1

 zzzspace v2.0 Audio Sample.ogg (16.48mb)
 http://www.mediafire.com/?5cn843cn7cv64t6
 
I put zzzspaces soundpack in my DCS World and man the soundfx are very good.

SUBS17:
BFT 06 trainning video showing lazy 8 and defensive spiral.

SUBS17:
Heres some more cool pics of the F-15 in FC3 and some dogfighting. The F-15 3d pit is awesome and the 3d model is extremely detailed especially when you get hit by something. Its great news that the SU27 is getting a new 3d model and 6dof pit as its weird flying non 6dof pits after using the F-15C.




New aggressor skin.









New blue aggressor skin.



Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version