Author Topic: KLAX  (Read 6358 times)

KingCat

  • Jr. Member
  • **
  • Posts: 91
KLAX
« on: October 04, 2011, 01:22:24 pm »
I purchased KLAX a few days ago, and I just did an 11 hour flight from EHAM to KLAX. I must say the scenery looks really nice, but I'm especially impressed by the good framerates. Even with the PMDG 747-400, I'm getting an average of 25 fps.  :)

Really amazing how such a detailed airport can still have high fps. I guess it just depends on who developes the airport. Maybe you can design all of your past and future sceneries the same way as KLAX was done.

Maybe FSDT can do a remake of EHAM. I bet the fps would be better than the current Aerosoft version.  ;D


Jon
« Last Edit: October 04, 2011, 01:24:06 pm by KingCat »

Bruce Hamilton

  • Beta tester
  • Hero Member
  • *****
  • Posts: 1768
Re: KLAX
« Reply #1 on: October 04, 2011, 02:11:20 pm »
I bet the fps would be better than the current Aerosoft version.  ;D

But would it sell better?  I think Aerosoft sales of EHAM have been disappointing.
Intel Core i7-4790 Haswell 4.0 GHz EVGA Z97 Classified EVGA Supernova 850 G2 G.Skill Ripjaws 16GB Western Digital 1TB GeForce GTX 780 Superclock

mbell

  • Newbie
  • *
  • Posts: 24
Re: KLAX
« Reply #2 on: October 04, 2011, 04:33:07 pm »
That's great! What are your settings?

pcubine

  • Full Member
  • ***
  • Posts: 193
Re: KLAX
« Reply #3 on: October 05, 2011, 08:37:46 pm »
I purchased KLAX a few days ago, and I just did an 11 hour flight from EHAM to KLAX. I must say the scenery looks really nice, but I'm especially impressed by the good framerates. Even with the PMDG 747-400, I'm getting an average of 25 fps.  :)

Really amazing how such a detailed airport can still have high fps. I guess it just depends on who developes the airport. Maybe you can design all of your past and future sceneries the same way as KLAX was done.

Maybe FSDT can do a remake of EHAM. I bet the fps would be better than the current Aerosoft version.  ;D


Jon

Jon
If you have the PMDG MD-11 and have the time try EHAM-KLAX and see what KLAX looks like at the end of the flight. I have both the PMDG MD-11 and 744. I have done about 15 flights from EHAM, EDDF, and EDDM to KLAX since it was released using the MD-11. You can see the results in the thread about 7 or 8 down from this one and it's  subject is KLAX strange objects. No problem in the 744. Still working on the MD-11. As a matter of fact I am one hour and fourteen minutes into a EHAM-KLAX right now trying essentially a default fsx.cfg file.

Michael Cubine
Michael Cubine

NZXT H440 Mid Tower, ASRock Z170 MB, i7-7700K (OC 5.0), Corsair Hydro H1 15i Liquid Cooling, 32GB DDR4 TridentZ SDRAM 3000MHz, 11GB NVIDA GeForce GTX 1080 Ti Video Card, 1000 Watt Corsair RM Series Power Supply, 1TB Samsung 850 Pro SSD

pcubine

  • Full Member
  • ***
  • Posts: 193
Re: KLAX
« Reply #4 on: October 06, 2011, 07:29:54 am »
Original problem is gone using the rebuilt fsx.cfg file. Now there are partial buildings and no jetways.

Michael Cubine
Michael Cubine

NZXT H440 Mid Tower, ASRock Z170 MB, i7-7700K (OC 5.0), Corsair Hydro H1 15i Liquid Cooling, 32GB DDR4 TridentZ SDRAM 3000MHz, 11GB NVIDA GeForce GTX 1080 Ti Video Card, 1000 Watt Corsair RM Series Power Supply, 1TB Samsung 850 Pro SSD

KingCat

  • Jr. Member
  • **
  • Posts: 91
Re: KLAX
« Reply #5 on: October 06, 2011, 08:14:52 am »
I purchased KLAX a few days ago, and I just did an 11 hour flight from EHAM to KLAX. I must say the scenery looks really nice, but I'm especially impressed by the good framerates. Even with the PMDG 747-400, I'm getting an average of 25 fps.  :)

Really amazing how such a detailed airport can still have high fps. I guess it just depends on who developes the airport. Maybe you can design all of your past and future sceneries the same way as KLAX was done.

Maybe FSDT can do a remake of EHAM. I bet the fps would be better than the current Aerosoft version.  ;D


Jon

Jon
If you have the PMDG MD-11 and have the time try EHAM-KLAX and see what KLAX looks like at the end of the flight. I have both the PMDG MD-11 and 744. I have done about 15 flights from EHAM, EDDF, and EDDM to KLAX since it was released using the MD-11. You can see the results in the thread about 7 or 8 down from this one and it's  subject is KLAX strange objects. No problem in the 744. Still working on the MD-11. As a matter of fact I am one hour and fourteen minutes into a EHAM-KLAX right now trying essentially a default fsx.cfg file.

Michael Cubine

I do not own the PMDG MD-11 so I cannot test that. But I'm using a Nvidia GTX 285 with no problems. If you're not experiencing the problems you mentioned in the PMDG B744, then it must be a problem with the MD-11. I can imagine how frustrating it is if something does not work the way it should, especially after an 11 hr. flight.


Jon

Johan

  • Full Member
  • ***
  • Posts: 249
Re: KLAX
« Reply #6 on: October 06, 2011, 04:45:53 pm »
Jon,

Which drivers (and settings?) are you using on your GTX 285? I am using the 197.13 (March 2010) on the same video card and just getting 15fps average at KLAX...I was just wondering if the more recent drivers for this card are better.
Thanks for your response,

Johan

KingCat

  • Jr. Member
  • **
  • Posts: 91
Re: KLAX
« Reply #7 on: October 06, 2011, 06:10:09 pm »
I'm using version 258.96

15 fps doesn't sound too bad depending on the aircraft you're using. I think it also depends on the hardware you have in your PC.

This is my configuration:

- Windows 7 Ultimate 64-bit.
- Intel Core i7 980x at 3.3 Ghz. (not overclocked).
- 6 GB RAM (1.066 Mhz.).
- Nvidia GTX 285 with 1 GB RAM.
- Asus P6T Deluxe v2 motherboard.
- Samsung SyncMaster 940BF 19" monitor.

I have included a .cfg file with this post that includes the settings in FSX that I use for KLAX. This file can be loaded in FSX from the "Settings" tab.

I hope this helps a bit.


Jon

Johan

  • Full Member
  • ***
  • Posts: 249
Re: KLAX
« Reply #8 on: October 06, 2011, 07:24:08 pm »
I'm using version 258.96

15 fps doesn't sound too bad depending on the aircraft you're using. I think it also depends on the hardware you have in your PC.

This is my configuration:

- Windows 7 Ultimate 64-bit.
- Intel Core i7 980x at 3.3 Ghz. (not overclocked).
- 6 GB RAM (1.066 Mhz.).
- Nvidia GTX 285 with 1 GB RAM.
- Asus P6T Deluxe v2 motherboard.
- Samsung SyncMaster 940BF 19" monitor.

I have included a .cfg file with this post that includes the settings in FSX that I use for KLAX. This file can be loaded in FSX from the "Settings" tab.

I hope this helps a bit.


Jon

Thanks Jon, I will try tonight. My hardware is not much different than yours, so I hope a little tweaking will improve a bit. Sometimes I drop below 10fps when I face the airport in the VC or with the 2-D panel open (with the default 747). I am overall very pleased with the scenery though.
Again, thanks for sharing,

Johan


Intel Core i7 950(3.06GHz)
64 bit Quad-Core Processor
9GB DDR3
NVIDIA GeForce GTX 285, with 1GB Discrete Video Memory
Windows Vista Home Premium 64-bit