[Resolved] SafeGate VDGS Font Issue?

Products Support > GSX Support FSX/P3D

(1/4) > >>

ua991:
This issue was reported by another user in the General Discussion section, but I thought I'd mention it in this section of the forum hoping someone else has seen this and hopefully resolved it.

It seems as soon as GSX needs to display something on a GSX VDGS (Safegate24 in this case), GSX will stop with the attached error log. If I'm elsewhere at the same airport and haven't parked at a gate with VDGS (such as a cargo spot) GSX works fine. When I fly into the airport, GSX will stop when I select the arrival gate via the GSX pop-up menu. Again, I suspect, because it is trying to display something on the VDGS. Note that my example here is with WSSS where I have replaced all the Imaginesim VDGS with GSX Safegate24 (not the SODE ones). This was all working fine up to a week or so ago. For other reasons, I have also done a complete Windows 11 and Prepar3D (V5.4) reinstall over the last few days, and the problem remains.

Any thoughts? I've tried reverting to older GPU drivers, uninstalling any Windows updates, changing any Prepar3D settings I recall changing etc.

Thanks,

Darryl

tfortch:
I have this issue too. Here is my log from KORD. I have tried and had the same crash with T2S-24 and T3-9 Safedocks I have tried at other airports. APIS and RLG systems work, just the safedocks seem to have issues. I have done full reinstall of GSX as well.

virtuali:
It seems both your problem are caused by not having updated GSX, because the new Fonts for FSX/P3D has been added with the Feb. 24th update:

https://www.fsdreamteam.com/couatl_liveupdate_notes.html

--- Quote ---GSX (FSX/P3D): Safegate3 VGDS backported from MSFS, to allow Simbrief information in FSX/P3D.
--- End quote ---

ua991:
I really wish it was as straight forward as that. I regularly check LiveUpdate. A couple of weeks ago it all worked then it stopped working. Also, as I've had to reinstall everything over the last few days, I used the current downloaders which always run LiveUpdate after the installation anyway. So, I should be up to date. As there doesn't seem to be many others reporting an issue, could it be related to having an AMD GPU? Flight sim users tend to go with Nvidia. I'm just trying to figure why I might be affected when others aren't.

Darryl

PS. Although a 'Newby' in this forum, that just means I haven't had to post here before. But I've used GSX since it first came out and have always been able to resolve any issues. This is the first one that I haven't been able to resolve.

anaconda4290:
Its not that because I have an nvidia gpu and I have the same issue. pasted below what my log said, this only started happening this week for me.

Slew mode False
onEnteredAirport OERK
Requested parking services to Gate 26
aircraftEngaged
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
set object -1000 mt. underground
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
CREATE_OBJECT_FAILED in call AICreateSimulatedObject param #1 'FSDT_GSX_Font_BLED_VGDS_small_yellow'
{'Airport': 'OERK', 'Requested parking services to': 'Gate 26', 'User Pos': (24.961119852600106, 46.70335328695647, 628.637 m, 4.10181 m, 298.03933483771357, 0.013952979817986488, 0.014137166552245617, 0.0, 4.1148, 1.0)}
GSX SimStop

Navigation

[0] Message Index

[#] Next page

Go to full version