GSX error midflight of 2nd leg (with panic log)

[chubaka]

Hi!

Just flew from EDDM to LEAL with FSL A320SL and everything worked as it should. All jetways worked properly, I could see the fuel truck and pople boarding, deboarding and boarding again in LEAL.
Some minutes after t/o from LEAL I received a message, that couatl shut down and if I want to restart it (what never ever worked yet). Had this problem for a few weeks now, before everything was good.
The problem occurs sometime on 1st flight, sometimes on 2nd, but normally inflight...
Updated yesterday with FSDT Update as couatl upater 1 and 2 seemed to not work well.
See the attached panic log (after t/o LEAL somewhere between ALC and BCN):

couatl v4.8 (build 5335)
panic log started on Wed Jan 10 12:27:43 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\common\aircraftData.py", line 82, in update
ImportError: No module named Couatl
{'Airport': 'LEAL', 'Requested assistance services at': 'Gate A 217', 'Requested parking services to': 'Gate 31', 'User Pos': (38.26599885249904, -0.7047455931717083, 1712.52 m, 1629.52 m, 183.9217276617675, -0.21739576756954193, -0.0, 0.43640158577849014, 4.572, 0.0)}
GSX SimStop

Specs:
i9-14900k
RTX4090 24GB
32GB DDR5-5600

P3Dv5.4
Pilot's LEAL
FSLABS
a lot of ORBX
AS P3D

[chubaka]

Next error. DUS-PMI-DUS. Happend when pushing back in PMI, Gate 52 with FSL A320. Pushing back in DUS@B09.

couatl v4.8 (build 5335)
panic log started on Thu Jan 11 13:29:02 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\common\fsm.py", line 73, in executeDoFuncToCompletion
  File ".\GSX\assistanceServices\pushBack.py", line 1095, in do
UnboundLocalError: local variable 'pushBackContact' referenced before assignment
{'Airport': 'LEPA', 'Requested assistance services at': 'Gate B 9', 'Requested parking services to': 'Gate 52', 'User Pos': (39.54999041378625, 2.737235049241403, 11.6804 m, 4.36735 m, 238.5792254317268, 0.001962527632713318, -0.0, -0.0, 4.572, 1.0)}
GSX SimStop

[chubaka]

So, reinstalled from the scratch and updated via FSDT Installer.
This time FRA-MXP and still in FRA this error occurs

couatl v4.8 (build 5335)
panic log started on Thu Jan 11 19:52:40 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\GSX\assistanceServices\__init__.py", line 3426, in pushBackRequested
  File ".\common\fsm.py", line 67, in switchToState
  File ".\GSX\assistanceServices\__init__.py", line 3658, in enter
AttributeError: 'Departure' object has no attribute 'pushBackVehicle'
{'Airport': 'EDDF', 'Requested assistance services at': 'Gate V 153', 'User Pos': (50.04147141324214, 8.559624658097347, 115.344 m, 4.39436 m, 159.9900047955173, 0.000930014590267092, -0.0, -0.0, 4.572, 1.0)}
GSX SimStop

FSL A320

Nobody able to give a hint??? Does FSDT have a ticket system?

[chubaka]

Wow! No feedback yet....
Good work 

[chubaka]

Trying again...

GSX still give me the error - more or less the same. Today out off EDDM for EDDH. Again FSLabs, and ORBX etc. Whether I have an a/c profile or let GSX build one. I am frustrated now...

couatl v4.8 (build 5335)
panic log started on Tue Feb 20 12:52:48 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\common\aircraftData.py", line 82, in update
ImportError: No module named Couatl
{'Airport': 'EDDM', 'Requested assistance services at': 'Gate 181', 'User Pos': (48.4658710897538, 11.604309210364956, 2710.1 m, 2233.44 m, 338.75419796451405, -0.08088916540145874, -0.0, -0.0022882535404049062, 4.572, 0.0)}
GSX SimStop

The error "Coautl stopped.." came about 5min after leaving EDDM/26R

What's meant with "no module named Couatl"?  I have no Antivirus software despite of Windows own one...

Any help please

[chubaka]

I am really frustrated! GSX is absolutely unusable

Thank you for not even viewing this thread...
 
It is always the "aircraftData.pye" and "No module named Couatl" that crashes GSX (and sometimes P3D). Yes, there must be a relationship: No crashes when GSX is disabled, some crashges when couatl quits mid-flight

[Captain Kevin]

Thank you for not even viewing this thread...

To be clear, I've read the posts, but as I'm not tech support and don't know what would cause the issue, I haven't responded as it would be pointless. Umberto is usually the one who handles support here, but no clue where he's been the last few weeks.

[chubaka]

couatl v4.8 (build 5335)
panic log started on Tue Mar  5 08:53:33 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\GSX\assistanceServices\__init__.py", line 2480, in passengersOnBoard
  File ".\GSX\assistanceServices\__init__.py", line 1335, in stopEmitters
AttributeError: 'Boarding' object has no attribute 'checkCameraRequest'
{'Airport': 'EDDB', 'Requested assistance services at': 'Gate B 12', 'User Pos': (52.36210506898234, 13.507027700392273, 49.4049 m, 4.38488 m, 68.79999626308208, 0.0004232221399433911, -0.0, -0.00024351921422235756, 4.572, 1.0)}
GSX SimStop


....

[chubaka]

Could do this all time...


couatl v4.8 (build 5335)
panic log started on Tue Mar  5 11:05:58 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\GSX\assistanceServices\__init__.py", line 2480, in passengersOnBoard
  File ".\GSX\assistanceServices\__init__.py", line 1335, in stopEmitters
AttributeError: 'Boarding' object has no attribute 'checkCameraRequest'
{'Airport': 'LSZH', 'Requested assistance services at': 'Gate A 11', 'User Pos': (47.45424050881122, 8.557966264375045, 435.985 m, 4.38884 m, 185.91501549370867, 0.002410613000392914, -0.0, -0.00017379025328073477, 4.572, 1.0)}
GSX SimStop

[chubaka]

couatl v4.8 (build 5335)
panic log started on Tue Mar  5 13:53:41 2024

problem raised by addon <unknown>
Traceback (most recent call last):
  File ".\GSX\assistanceServices\__init__.py", line 2480, in passengersOnBoard
  File ".\GSX\assistanceServices\__init__.py", line 1335, in stopEmitters
AttributeError: 'Boarding' object has no attribute 'checkCameraRequest'
{'Airport': 'EDDM', 'Requested assistance services at': 'Gate A 213', 'User Pos': (48.354557651006544, 11.792938067144929, 454.393 m, 4.39299 m, 263.36000584359374, 0.0022563417442142963, -0.0, -0.00018687865783467304, 4.572, 1.0)}
GSX SimStop

P3dv5, FSLabs A320

[chubaka]

See the attached...

[chubaka]

@virtuali
Here is the log-file from start to crash after boarding passengers. Installed the newest update and reinstalled completely before.
It is quite sad, that not even an info or a feedback comes over
Every flight is quite a mess....

[chubaka]

It has surely to to do with the passengers. When using refueling through the ATSU by GSX and boarding with instant function nothing happens and everythings works out well.

Would be nice to have at least an idea or comment regarding this problem....

[Captain Kevin]

Would be nice to have at least an idea or comment regarding this problem....

And I still have no idea where Umberto has been.

[srcooke]

Getting the same error when using FSL A320 at EFHK

Python 2.7.16 Stackless 3.1b3 060516 (default, Mar  9 2019, 21:32:11) [MSC v.1500 64 bit (AMD64)] wxPython 3.0.2.0
couatl v4.8 (build 5335)

Traceback (most recent call last):
  File ".\GSX\assistanceServices\__init__.py", line 2480, in passengersOnBoard
  File ".\GSX\assistanceServices\__init__.py", line 1335, in stopEmitters
AttributeError: 'Boarding' object has no attribute 'checkCameraRequest'
{'Airport': 'EFHK', 'Requested assistance services at': 'Gate 29', 'Requested parking services to': 'Gate 29', 'User Pos': (60.31842389583445, 24.964599546719796, 58.9629 m, 4.40588 m, 137.46450149426914, 0.0012249659048393369, -0.0, -0.00022176456182090642, 4.572, 1.0)}
GSX SimStop