Author Topic: PMDG 737 Cargo profile  (Read 9607 times)

JoramD

  • Newbie
  • *
  • Posts: 5
Re: PMDG 737 Cargo profile
« Reply #15 on: August 19, 2020, 08:33:29 pm »
I got it to work, for some reason the variable for the main cargo door is `7X7Xmaincargodoor` not `NGXMainCargoDoor`.

Attached is an overall improved config with working cargo door.

Gadget FPV

  • Newbie
  • *
  • Posts: 11
Re: PMDG 737 Cargo profile
« Reply #16 on: August 20, 2020, 01:18:33 am »
I got it to work, for some reason the variable for the main cargo door is `7X7Xmaincargodoor` not `NGXMainCargoDoor`.

Attached is an overall improved config with working cargo door.

Brilliant... All is good now... works flawlessly... Just a question, how did you manage to find out that the variable was `7X7Xmaincargodoor` and not `NGXMainCargoDoor`...

Faisal

JoramD

  • Newbie
  • *
  • Posts: 5
Re: PMDG 737 Cargo profile
« Reply #17 on: August 20, 2020, 02:21:42 am »
I use LINDA to set up my controllers and it has a "tracer" feature which also shows all variables. That is how I saw every active variable but I had to find a config for the 747-8F and see that that used the 7X7X variable (which was also present with the NGXu).

Just a little snooping around  ;)

p3dx3

  • Hero Member
  • *****
  • Posts: 592
Re: PMDG 737 Cargo profile
« Reply #18 on: August 20, 2020, 02:16:31 pm »
I got it to work, for some reason the variable for the main cargo door is `7X7Xmaincargodoor` not `NGXMainCargoDoor`.

Attached is an overall improved config with working cargo door.

Thanks and note the Boeing Converted Freighter and Badek Freighter have the cargo doors in different places

JoramD

  • Newbie
  • *
  • Posts: 5
Re: PMDG 737 Cargo profile
« Reply #19 on: August 20, 2020, 02:19:17 pm »
I got it to work, for some reason the variable for the main cargo door is `7X7Xmaincargodoor` not `NGXMainCargoDoor`.

Attached is an overall improved config with working cargo door.

Thanks and note the Boeing Converted Freighter and Badek Freighter have the cargo doors in different places

I have not looked at the BeDeck variant, I imaged you/someone else would make that at some point :)

tana

  • Newbie
  • *
  • Posts: 1
Re: PMDG 737 Cargo profile
« Reply #20 on: August 21, 2020, 10:52:22 am »
Hello
I was able to put the cargo door and the stairs to the pilots door.
I would like to put the dollies for 11 cargo pallets to load.

dron960

  • Newbie
  • *
  • Posts: 35
Re: PMDG 737 Cargo profile
« Reply #21 on: August 23, 2020, 06:45:59 pm »
At the front left exit, you need to leave the usual ramp, otherwise the pilots will climb into the cabin past the steps. With the usual ladder is normal.

JoramD

  • Newbie
  • *
  • Posts: 5
Re: PMDG 737 Cargo profile
« Reply #22 on: August 23, 2020, 10:55:01 pm »
I have added support for the built-in airstairs and made configs for all 737 cargo variants.

Please let me know if there are any issues (there shouldn't be though!).

JoramD

  • Newbie
  • *
  • Posts: 5
Re: PMDG 737 Cargo profile
« Reply #23 on: August 23, 2020, 10:56:19 pm »
At the front left exit, you need to leave the usual ramp, otherwise the pilots will climb into the cabin past the steps. With the usual ladder is normal.


There is nothing I can do about this. When an aircraft is marked as a cargo plane in GSX it will use this staircase which I'm guessing wasn't designed for the smaller 737.

dron960

  • Newbie
  • *
  • Posts: 35
Re: PMDG 737 Cargo profile
« Reply #24 on: August 24, 2020, 03:50:22 pm »
That's right, this checkbox should be removed
« Last Edit: August 24, 2020, 04:16:54 pm by dron960 »

Bill721

  • Newbie
  • *
  • Posts: 44
Re: PMDG 737 Cargo profile
« Reply #25 on: September 16, 2020, 06:14:03 pm »
Has an official PMDG 737 Cargo Profile been released?