Products Support > GSX Support FSX/P3D
Airport parking mark & cargo unloading allignment problem
RVxSpeed:
--- Quote from: virtuali on June 28, 2020, 12:41:09 am ---Ok, now I understand, the problem is the side cart loader is making a very tight turn in order not to crash into the engine on exit, so the last carts are a bit skewed, making the last pallet moving diagonally.
Which is not entirely unrealistic, those rollers allow complete freedom of movement over the surface:
=284
I think if we made the turn radius larger, preventing this effect on the last 2 pallets, will cause a more disturbing collision with the engines, depending where they are in relationship to the main cargo door, of course.
--- End quote ---
Can you make the truck to go straight instead of turn. Just like front & aft cargo.
RVxSpeed:
So bottom line is there is no easy fix. I can’t edit the position to stop the aircraft on the marked parking spot. Also if I can do I might ruin it for other types of aircraft
virtuali:
--- Quote from: virtuali on June 27, 2020, 07:36:43 pm ---So bottom line is there is no easy fix. I can’t edit the position to stop the aircraft on the marked parking spot.
--- End quote ---
Of course you can. By customizing the stop position in GSX, no need to edit the scenery.
--- Quote ---Also if I can do I might ruin it for other types of aircraft
--- End quote ---
Of course not. As the paragraph in the manual I suggested to read says, adjusting the Stop position in GSX will result in different airplane types with their Exit in the same position, and their front gear in different positions, which is exactly what happens in real life, because the whole point of having different stop positions on ground is to have the doors in the same place, both for jetway but also for cargo usage ( for example, Cargo stands at KSDF, which requires every plane to end up with the side cargo in exactly the same place )
virtuali:
--- Quote from: RVxSpeed on June 28, 2020, 08:17:41 am ---Can you make the truck to go straight instead of turn. Just like front & aft cargo.
--- End quote ---
No, because it will then surely clash with the engine, if running from south to north, or with an eventual staircase on the rear or possibly even vehicles running on a vehicle path close to the tail, if running from north to south. There IS a reason why they turn while loading in real life...
RVxSpeed:
--- Quote from: virtuali on June 28, 2020, 09:03:17 am ---
--- Quote from: RVxSpeed on June 28, 2020, 08:17:41 am ---Can you make the truck to go straight instead of turn. Just like front & aft cargo.
--- End quote ---
No, because it will then surely clash with the engine, if running from south to north, or with an eventual staircase on the rear or possibly even vehicles running on a vehicle path close to the tail, if running from north to south. There IS a reason why they turn while loading in real life...
--- End quote ---
Either GSX doesn't know what's doing or you don't know what you are telling me. You said you can't make them go straight just like the FWD & AFT cargo & your logic was it will clash with engine & with other GSX vehicle? Well here you go. The pallet still GOES THROUGH number 1 engine.
=1921
The video is timestamped. If you do not know what is that. It means that when you click on the video it starts exactly where the creator wants you see. If you still can't figure out. It happens on 32:00 Mark.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version