Products Support > GSX Support FSX/P3D
Airport parking mark & cargo unloading allignment problem
virtuali:
--- Quote from: RVxSpeed on June 29, 2020, 02:20:46 pm ---Either GSX doesn't know what's doing or you don't know what you are telling me[/. You said you can't make them go straight just like the FWD & AFT cargo & your logic was it will clash with engine & with other GSX vehicle? Well here you go. The pallet still GOES THROUGH number 1 engine.
--- End quote ---
I never said that, making the turn, will *always* prevent going through the engine, under any condition and any configuration of the cargo door, because that depends on the engine location.
I said if it went straight, as you suggested, it will SURELY clash with BOTH the engines AND especially the rear staircases, which is NOT a problem on the right side, that's why the loaders on the right side make a shallower turn.
--- Quote ---If you do not know what is that. It means that when you click on the video it starts exactly where the creator wants you see. If you still can't figure out. It happens on 32:00 Mark.
--- End quote ---
I obviously know what a timestamped video means, since the video I posted about showing the pallet that can move in any direction IS timestamped. It's YOU that FORGOT to timestamp the first video you posted, which you said it was timestamped when it it wasn't. This last video you posted is timestamped, the first one I replied to wasn't.
But again, you said the "problem" is the pallet going diagonal, which is not, since that kind of platform rollers allows movement in any direction, and what really matters is the pallet ends up aligned with the cart.
RVxSpeed:
Since this is an ISSUE. Are you going to fix it?
virtuali:
--- Quote from: RVxSpeed on June 29, 2020, 02:31:02 pm ---Since this is an ISSUE. Are you going to fix it?
--- End quote ---
I'll repeat it again, if the "issue" is the pallet going diagonal ( as you said in your post ), it's not, since that kind of platform rollers allows movement in any direction, and what really matters is the pallet ends up aligned with the cart.
If, instead, the "issue" is the clash with the engine, we surely can look at it, because in my view is way more important that the pallet going diagonal, which is really nitpicking and it can be done in real life.
RVxSpeed:
I am not talking about going diagonal. I am talking about pallets going through the engine.
virtuali:
--- Quote from: RVxSpeed on June 29, 2020, 02:34:34 pm ---I am not talking about going diagonal. I am talking about pallets going through the engine.
--- End quote ---
You started with this thread about the pallet going diagonal, you even drawn a diagram in your first post, which is titled "cargo unloading allignment problem"
Now, after I show the real life video indicating pallets can move in any direction on the platform, you raised a DIFFERENT issue, which I already replied to in my previous post, which I'll repeat it here:
--- Quote ---If, instead, the "issue" is the clash with the engine, we surely can look at it, because in my view is way more important that the pallet going diagonal, which is really nitpicking and it can be done in real life.
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version