General Category > Unofficial F/A-18 Acceleration Pack board
FSXBA F/A-18C HORNET
doksas:
Pat you are great and thanks for all your answeres and your time.
Mayday mayday, sometimes I think i use the wrong plane :) ,some of the things you mention to me do not exist. :(
So, i use (after comlete FSX reinstall) plane in this thread from first page : FA-18C_FSXBA_BA_18.3.00 for FSX of course becaouse i find this version have better fps on my configuration, and put this folder in FSX-SimObjects-Airplanes.
You say:"Watch the APU stats on the Engine Monitor page on one of the MFDs'' ... but i dont have this options for APU on the MFD engine page.
Today before your sugestion for cold and dark F18, i try same thngs like you recommend...default trike over Friday harbour is set as default flights, then saved F18 ( not set as default flight) with engine off and all oFF, but when load this flight next time F18 is runing engines and all except APU.
Next you say :'' The two generators will turn off by themselves as the engines spool down below about 62%''...
No, on my plane generators stay ON forever when shutdown engines manualy and even with keyboard command CTRL+SHFT+F1.
Bright (BRT) knob under UFC not work for me, forever stayed in left position, i try with mouse left and right click, mouse wheel, but not work.
That is why I have the impression that we are talking about two different planes...
For carriers takeoff i use rcbco-30 and CV66, CV68 and CV69 on my own customized location around the world, Aicarriers i use only for landing , so not problem with cold and dark start on my carrier .
Kind regards.
EDIT:
Just example for engine info on MDF
Default FSX F-18 have APU info
and FSXBA F-18 dont have APU info
EDIT 2:
For generators turn off by themselves as the engines spool down below about 62%, ok not turn off visual but have warning gen off, this is ok.
PhantomTweak:
Hmmmm...
You're right. I must be thinking of an older model. Maybe. Let me do some research.
I have some real life stuff to take care of. Let me have a couple of days. I'll have to re-install the v18.3. I'll need some time, ok?
I will get back to this as fast as I can, but like I said, I have some stuff I need to take care of at home.
I'll get back to you as fast as I can. In the mean time, just fly the v18.3 as best you can. It really is a great plane...
Pat☺
doksas:
No problem Pat, just go easy, real life is on first place, cheers.
jj737:
Hi,
I deeply love this plane but there seems to be something awfully wrong with my installation.
(FA-18C_FSXBA_BA_18.4.65, latest P3D 4.5, latest FSUIPC, latest EZDOK)
When the mouse hovers over some buttons then indications show up which do not fit to this button. E.g. CRS button shows Oil temperature. Or clicking on the MAP button on the lower MFD then the cage/uncage button of the ADI moves. (Screenshots attached)
I guess this is related to serious problems with the autopilot.
E.g. deactivating BALT the plane pitches up 50° and more and is completely out of trim.
Another example AP is in BALT & HSEL and I clk CSEL on the MFD in HSI mode the plane goes crazy, pitches up vertically in the sky.
What did I miss or have done wrong?
Regards
zsoltquack:
Hi,
The VMFA-323 Death Rattlers link is dead
???
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version